{"product_id":"ultra-clear-ro-edi-30-reverse-osmosis-edi-combination-pure-water-system","title":"Ultra Clear RO EDI 30 Reverse osmosis\/ EDI combination Pure Water System","description":"\u003cstrong\u003eUltra Clear RO EDI 30 Reverse osmosis\/ EDI combination\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e Pure water production from softened potable tap water. The system combines the technology of the reverse osmosis with the final deionization of the permeate by single bed electroeioni-\u003cbr\u003e zation. The system is placed in a well-designed plastic housing.\u003cbr\u003e \u003cbr\u003e The reverse osmosis component mainly consists of:\u003cbr\u003e 1 Solenoid valve for raw water\u003cbr\u003e 1 Pre-treatment module AMD, fine filter made of plastic, inclusive active carbon\/fine filter cartridge 5 µm, front-side operated\u003cbr\u003e 1 Pressure switch as pump protection\u003cbr\u003e 1 High pressure pump made of brass with magnetic-coupled E-motor\u003cbr\u003e 1 Pressure gauge to indicate operating pressure\u003cbr\u003e 1 Module set with spiral-wound membranes, made of polyamide on a  polysulphone basis, incl. pressure vessel with end caps\u003cbr\u003e 1 Solenoid valve for permeate reject when conductivity is exceeded\u003cbr\u003e 1 Conductivity meter for permeate\u003cbr\u003e 1 Restrictor for limiting the concentrate quantity\u003cbr\u003e \u003cbr\u003e The Ionpure component mainly consists of:\u003cbr\u003e 1 Ionpure cell, two-pass, with chambers for anion and cation exchange resin and brine chambers, anodes, cathodes, ion-selective membranes and end plates\u003cbr\u003e 1 Conductivity meter for pure water\u003cbr\u003e 1 Restrictor for limiting the brine\u003cbr\u003e 1 Conditioning cartridge\u003cbr\u003e \u003cbr\u003e Control:\u003cbr\u003e Display with membrane keyboard with monitor for:\u003cbr\u003e - Conductivity permeate and pure water\u003cbr\u003e - Level indication storage tank in Percent for level sensors or fixed value for float switches\u003cbr\u003e - 3 free selectable switching activating points ON\/OFF and running dry-protection for booster pump\u003cbr\u003e - Status indication via symbols\u003cbr\u003e - Indications for maintenance intervals and replacement of cartridge\u003cbr\u003e - Fault indication (insufficient raw water, insufficient permeate, conductance LF1 \/ LF 2)\u003cbr\u003e - Timer program for displacement of concentrate and module flushing\u003cbr\u003e - RS 232 interface (processing software optional)\u003cbr\u003e - Multilingualism\u003cbr\u003e 1 set connecting hoses\u003cbr\u003e 1 filter cup wrench\u003cbr\u003e 1 operator's manual\u003cbr\u003e \u003cbr\u003e Performance specifications:\u003cbr\u003e - Production rate at 15°C: 30 l\/h\u003cbr\u003e - Conductivity: \u0026lt; 0.2 µS\/cm\u003cbr\u003e - typical conductivity: 0.07 µS\/cm\u003cbr\u003e - Silicate content: \u0026lt; 10 ppb\u003cbr\u003e - TOC value: \u0026lt; 30 ppb\u003cbr\u003e - particle rejection: \u0026gt; 99 %\u003cbr\u003e \u003cbr\u003e Feed water specifications:\u003cbr\u003e - Flow rate: 44 - 66 l\/h\u003cbr\u003e - Pressure: 0,1 - 5 bar\u003cbr\u003e - Maximum conductivity: \u0026lt; 1400 µS\/cm\u003cbr\u003e - SDI: \u0026lt; 3\u003cbr\u003e - FE and free chlorine: \u0026lt; 0,1 mg\/l\u003cbr\u003e - CO2 value in the feed: \u0026lt; 10 mg\/l\u003cbr\u003e - max. SiO2 value in the feed: \u0026lt; 10 mg\/l\u003cbr\u003e - Permissible water temp.: 5 - 30°C\u003cbr\u003e \u003cbr\u003e Technical data:\u003cbr\u003e - Operating pressure: max. 6 bar\u003cbr\u003e - Electrical power: 100-240V, 50-60 Hz\u003cbr\u003e - Current consumption: 0.2 kW\u003cbr\u003e - Fuse: 16 A\u003cbr\u003e - Permissible ambient temp.: 5 - 35°C\u003cbr\u003e \u003cbr\u003e Connections:\u003cbr\u003e Raw water: 3\/4''\u003cbr\u003e Pure water: d= 8 mm\u003cbr\u003e Drain concentrate: d= 8 mm\u003cbr\u003e Drain brine: d= 6 mm\u003cbr\u003e \u003cbr\u003e Dimensions and Weight:\u003cbr\u003e Height: 530 mm\u003cbr\u003e Width: 340 mm\u003cbr\u003e Depth: 420 mm\u003cbr\u003e Weight: 35 kg\u003cbr\u003e \u003cbr\u003e Please note:\u003cbr\u003e The performance is based on a raw water salt content of max. 750 mg\/l (TDS) equivalent to a conductivity of 1400 µS\/cm at 15°C. From 10°dH or higher, a softener is recommended.\u003cbr\u003e All a. m. components are assembled into a complete system. The Ultra Clear RO EDI can be put into operation without the help of a factory service engineer.\u003cbr\u003e \u003cbr\u003e The feed water specifications are guidelines. The pure water specifications can only be guaranteed, if a drinking water analysis is available for the plant location and all other relevant\u003cbr\u003e parameters have been evaluated.\u003cbr\u003e \u003cbr\u003e","brand":"IDL","offers":[{"title":"1 piece","offer_id":56333459194188,"sku":"W3T441750","price":7989.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/167-Ultra_20Clear_20RO_8770da38-198f-4df8-ab88-22b6bf7d16ca.png?v=1766839290","url":"https:\/\/www.luminixhealth.com\/en-be\/products\/ultra-clear-ro-edi-30-reverse-osmosis-edi-combination-pure-water-system","provider":"Luminix Health","version":"1.0","type":"link"}