{"title":"Hamilton","description":null,"products":[{"product_id":"buffer-solution-duracal-ph-4-01-25-c-25ax-25ax","title":"Buffer solution DuraCal pH 4.01 (25 °C), tinted RED, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 4.01 (25 °C) is a ready-to-use pH calibration buffer tinted red and supplied with a DAkkS certificate. It is intended for accurate calibration and verification of pH electrodes and meters at the acidic reference point of pH 4.01 at 25 °C. With a density of approximately 1 g\/cm³ and a boiling point of 100 °C, the aqueous solution remains practical under normal laboratory conditions. The red tint helps distinguish this standard from other buffers on the bench and reduces mix-ups during multi-point calibration. Packaged as 500 ml, the buffer supports repeated calibration cycles in analytical, environmental, pharmaceutical and industrial laboratories. This DuraCal buffer from manufacturer HAMILTON addresses workflows that require documented traceability through DAkkS certification. Typical uses include routine electrode calibration, instrument qualification and quality-control checks where a certified pH 4.01 standard is specified. The convenient volume suits both high-throughput benches and occasional calibration without frequent bottle changes.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 4.01 ±0.01\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 4,01 (25 °C)\u003c\/li\u003e\n\u003cli\u003eColour: tinted RED\u003c\/li\u003e\n\u003cli\u003eCertificate: DAkkS\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SPEZ-25AX-EN.pdf?context=bWFzdGVyfHNwZWNpZmljYXRpb25zfDEwNDE2OHxhcHBsaWNhdGlvbi9wZGZ8YUdWbUwyaGpPQzg1TWprek1Ea3dNRFl5TXpZMkwxTlFSVnBmTWpWQldGOUZUaTV3WkdZfDRiZTU5NDIxOTQ3MTljMmE3YmVlYmU3YmNiMmQ4MjRhZmFiMjJhZDQzNGI3ZjYwOTY1MjM4YjgxZDhjNjk5NmU\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-25AX-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNDEwNjV8YXBwbGljYXRpb24vcGRmfGFEUmpMMmd6TWk4NU1UUXlNVEUwTkRnME1qVTBMMU5FUWw4eU5VRllYMGRDWDBWT0xuQmtaZ3wzN2FjYWVmMmUyMjYyYjdlOTI0MWNhNGZhNjJjOTUxYjY2M2M2NzI4OWI1Y2FmN2U4ZGFiZmYwODU2OWQ0Y2M5\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56128410681676,"sku":"25AX.1","price":45.7,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56128410714444,"sku":"25AX.1","price":43.42,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56128410747212,"sku":"25AX.1","price":41.13,"currency_code":"EUR","in_stock":true},{"title":"250 ml \/ 1 piece","offer_id":58621745791308,"sku":"25AX.2","price":28.95,"currency_code":"EUR","in_stock":true},{"title":"1500 ml \/ 1 piece","offer_id":58621745824076,"sku":"25AX.3","price":95.7,"currency_code":"EUR","in_stock":true},{"title":"3 liter \/ 1 piece","offer_id":58621745856844,"sku":"25AX.4","price":127.95,"currency_code":"EUR","in_stock":true},{"title":"5 liter \/ 1 piece","offer_id":58621745889612,"sku":"25AX.5","price":212.85,"currency_code":"EUR","in_stock":true},{"title":"10 liter \/ 1 piece","offer_id":58621745922380,"sku":"25AX.6","price":342.95,"currency_code":"EUR","in_stock":true},{"title":"25 liter \/ 1 piece","offer_id":58621745955148,"sku":"25AX.7","price":428.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-25AX.jpg?v=1766414082"},{"product_id":"buffer-solution-duracal-ph-7-00-25-c-25ay-25ay","title":"Buffer solution DuraCal pH 7.00 (25 °C), tinted GREEN, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 7.00 (25 °C) is a ready-to-use calibration standard for accurate pH-value determination in laboratory and process environments. Specified at 25 °C and tinted green for clear visual identification, it supports reliable electrode calibration and routine quality control. The solution is supplied with a DAkkS certificate, giving documented traceability for regulated workflows and audit-ready measurement chains. Physical characteristics include a density of approximately 1 g\/cm³ and a boiling point of 100 °C, consistent with aqueous buffer systems used in analytical chemistry. Offered in a practical 500 ml pack, the formulation is suited to frequent multi-point calibrations on benchtop meters and portable instruments. This DuraCal buffer from manufacturer HAMILTON fits applications in research, industrial QC, environmental monitoring, and teaching laboratories where stable neutral-range reference points are required. Categories of use include determination of physical properties and dedicated pH buffer work, helping maintain consistent meter performance across successive measurement series without unnecessary handling complexity.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 7.00 ±0.01\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 7,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eColour: tinted green\u003c\/li\u003e\n\u003cli\u003eCertificate: DAkkS\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SPEZ-25AY-EN.pdf?context=bWFzdGVyfHNwZWNpZmljYXRpb25zfDEwMzg2NHxhcHBsaWNhdGlvbi9wZGZ8YURneEwyZ3pOQzg1TWpreU9EUXpNelV5TURrMEwxTlFSVnBmTWpWQldWOUZUaTV3WkdZfGIxZWUwZjkxNjc0NzUwN2EwNDgxZTVhNjNlNmUyNjM2YzBiYzNiZTZkODA0YzljM2EyOTA5YTAzNmE4MzA1OWM\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-25AY-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzcwMjh8YXBwbGljYXRpb24vcGRmfGFEZGtMMmd5T0M4NU1UUXlNVEUwTnpRMk16azRMMU5FUWw4eU5VRlpYMGRDWDBWT0xuQmtaZ3wyYjhhODYwZTllMmFkMjUxNzlkYzFiODI1OTgyZjAxOTc4MDcwNGY3MTIyMjJiYjRmYmY2MjY4NTA3OTFhMzlj\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56128410779980,"sku":"25AY.1","price":45.7,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56128410812748,"sku":"25AY.1","price":43.42,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56128410845516,"sku":"25AY.1","price":41.13,"currency_code":"EUR","in_stock":true},{"title":"250 ml \/ 1 piece","offer_id":58621746020684,"sku":"25AY.2","price":28.95,"currency_code":"EUR","in_stock":true},{"title":"1500 ml \/ 1 piece","offer_id":58621746053452,"sku":"25AY.3","price":95.7,"currency_code":"EUR","in_stock":true},{"title":"3 liter \/ 1 piece","offer_id":58621746086220,"sku":"25AY.4","price":127.95,"currency_code":"EUR","in_stock":true},{"title":"5 liter \/ 1 piece","offer_id":58621746118988,"sku":"25AY.5","price":192.45,"currency_code":"EUR","in_stock":true},{"title":"10 liter \/ 1 piece","offer_id":58621746151756,"sku":"25AY.6","price":342.95,"currency_code":"EUR","in_stock":true},{"title":"25 liter \/ 1 piece","offer_id":58621746184524,"sku":"25AY.7","price":428.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-25AX_98c14f37-fa19-4f82-95fa-38bd41c88ad4.jpg?v=1766414082"},{"product_id":"buffer-solution-duracal-ph-10-01-25-c-25c1-25c1","title":"Buffer solution DuraCal pH 10.01 (25 °C), tinted YELLOW, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 10.01 (25 °C) is a ready-to-use alkaline standard for calibration and verification of pH measuring systems. Specified at 25 °C and tinted yellow for quick visual distinction from other buffer values, it supports accurate electrode adjustment in laboratory and field applications. The product is delivered with a DAkkS certificate, enabling traceable calibration records for quality-controlled and accredited environments. Manufacturer data indicate a density of approximately 1 g\/cm³ and a boiling point of 100 °C. Supplied as a 500 ml pack, the solution is practical for frequent multi-point calibrations on benchtop and portable meters. This DuraCal buffer from manufacturer HAMILTON addresses alkaline-range needs within pH-value determination and broader physical-property testing. Colour-coded identification and certified composition help laboratories keep measurement chains consistent in research, industrial quality control, environmental monitoring, and educational laboratories that rely on stable high-pH reference points.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 10.01 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 10,01 (25 °C)\u003c\/li\u003e\n\u003cli\u003eColour: tinted yellow\u003c\/li\u003e\n\u003cli\u003eCertificate: DAkkS\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SPEZ-25C1-EN.pdf?context=bWFzdGVyfHNwZWNpZmljYXRpb25zfDEwNDM4OHxhcHBsaWNhdGlvbi9wZGZ8YURBNEwyZ3lNeTg1TWprek1EZzVNVGMzTmpNd0wxTlFSVnBmTWpWRE1WOUZUaTV3WkdZfGZmYmJiMDNjNTdkNDIyMzI4OWNiMWVlNmUxOWYzYzkyZDNlNDhjN2NkODVlOGE5ZmU0Y2U0ZDQ1ZDIwODZiMTM\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-25C1-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzc3MDJ8YXBwbGljYXRpb24vcGRmfGFETmtMMmd5WXk4NU1UUXlNVEUwTmpFMU16STJMMU5FUWw4eU5VTXhYMGRDWDBWT0xuQmtaZ3xlZjgwZTQzMDQ2MmQyZDEzZWMzNmJiNDM4NDM5MmFlMmI3Mzc1NjViNDU3MGIxNWM0OGI3NGI4OTlkZDMzYzQz\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56128410976588,"sku":"25C1.1","price":45.7,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56128411009356,"sku":"25C1.1","price":43.42,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56128411042124,"sku":"25C1.1","price":41.13,"currency_code":"EUR","in_stock":true},{"title":"250 ml \/ 1 piece","offer_id":58621746905420,"sku":"25C1.2","price":28.95,"currency_code":"EUR","in_stock":true},{"title":"1500 ml \/ 1 piece","offer_id":58621746938188,"sku":"25C1.3","price":95.7,"currency_code":"EUR","in_stock":true},{"title":"3 liter \/ 1 piece","offer_id":58621746970956,"sku":"25C1.4","price":127.95,"currency_code":"EUR","in_stock":true},{"title":"10 liter \/ 1 piece","offer_id":58621747003724,"sku":"25C1.5","price":342.95,"currency_code":"EUR","in_stock":true},{"title":"25 liter \/ 1 piece","offer_id":58621747036492,"sku":"25C1.6","price":428.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-25AX_5257dd1e-31cb-4e76-8470-47de6ffb4ade.jpg?v=1766414083"},{"product_id":"buffer-solution-duracal-ph-1-09-25-c-33ct-33ct","title":"Buffer solution DuraCal pH 1.09 (25 °C), colourless, with Hamilton certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 1,09 (25 °C) is a ready-to-use pH reference buffer for calibration and verification of pH measurement systems. The colourless solution is specified at pH 1,09 at 25 °C and is supplied with a Hamilton certificate, supporting documented traceability in laboratory quality systems. Packed as a 500 ml unit, it shows a density of approximately 1 g\/cm³ and a boiling point of 100 °C. This acidic buffer is suited to electrode calibration, routine checks and method control wherever low-pH reference points are required in research, quality control or process laboratories. Clear appearance aids visual inspection before use on meters, electrodes and automated pH systems. The DuraCal buffer from manufacturer HAMILTON is intended for determination of physical properties in pH-value workflows and is classified under UN number 1789. Analysts can integrate it into daily calibration sequences to maintain accurate, reproducible pH readings at the stated reference value without additional preparation steps.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 1.09 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003eProduct line: DuraCal\u003c\/li\u003e\n\u003cli\u003epH value: 1,09 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33CT-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNjU1MzV8YXBwbGljYXRpb24vcGRmfGFHRTJMMmhtWlM4NU1UWXlPRE15TWpFMk1EazBMMU5FUWw4ek0wTlVYMGRDWDBWT0xuQmtaZ3wxMDBkMzc3OWQzOWM2N2VjNTUzZTY3ZmU2MWQxMWNmNmI5MjdiMTIwMTA0NDY2OTJlMWVhNjU5Nzk4Njc3ZmQ5\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33CT-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNjU1MzV8YXBwbGljYXRpb24vcGRmfGFHRTJMMmhtWlM4NU1UWXlPRE15TWpFMk1EazBMMU5FUWw4ek0wTlVYMGRDWDBWT0xuQmtaZ3wxMDBkMzc3OWQzOWM2N2VjNTUzZTY3ZmU2MWQxMWNmNmI5MjdiMTIwMTA0NDY2OTJlMWVhNjU5Nzk4Njc3ZmQ5\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149335572812,"sku":"33CT.1","price":44.65,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149335605580,"sku":"33CT.1","price":42.42,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149335638348,"sku":"33CT.1","price":40.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33CT_53a583a9-1adb-48dc-a371-2ac04cf70ce8.jpg?v=1766434524"},{"product_id":"buffer-solution-duracal-ph-1-68-25-c-33cx-33cx","title":"Buffer solution DuraCal pH 1.68 (25 °C), colourless, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 1.68 (25 °C) is a colourless, ready-to-use calibration standard for precise pH-value determination in analytical and quality-control laboratories. Formulated for electrode and meter calibration at the stated acidic reference point of pH 1.68 measured at 25 °C, it supports reproducible physical-property measurements. The solution has a density of approximately 1 g\/cm³ and a boiling point of 100 °C, and is supplied in a practical 500 ml pack with a net weight of 0,701 kg. Each unit is accompanied by a DAkkS certificate, enabling documented, traceable calibration workflows. This DuraCal buffer from manufacturer HAMILTON is intended for routine use in pH determination, method validation, and instrument checks across research, industrial, and environmental laboratories. Its clear appearance and defined reference value help maintain measurement consistency during repeated calibration cycles, making it a dependable choice wherever an acidic buffer standard at pH 1.68 (25 °C) is required for accurate electrode performance verification.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 1.68 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 1,68 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli\u003eCertificate: DAkkS\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33CX-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNjUxMTl8YXBwbGljYXRpb24vcGRmfGFEZG1MMmhtTnk4NU1UWXlPRE15TkRRMU5EY3dMMU5FUWw4ek0wTllYMGRDWDBWT0xuQmtaZ3xkZGI5N2M2Yjc2ODNkMDNhOTUyZGE2NDMxZWM3YzcxNmMyMzI4ZjM5NzRkZjc0M2EwNTkxYmFmYTFiYzNhYzE4\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33CX-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNjUxMTl8YXBwbGljYXRpb24vcGRmfGFEZG1MMmhtTnk4NU1UWXlPRE15TkRRMU5EY3dMMU5FUWw4ek0wTllYMGRDWDBWT0xuQmtaZ3xkZGI5N2M2Yjc2ODNkMDNhOTUyZGE2NDMxZWM3YzcxNmMyMzI4ZjM5NzRkZjc0M2EwNTkxYmFmYTFiYzNhYzE4\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149335769420,"sku":"33CX.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149335802188,"sku":"33CX.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149335834956,"sku":"33CX.1","price":50.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33CX_93aebd57-3b81-495d-b3f5-c924024aa28a.jpg?v=1766434525"},{"product_id":"buffer-solution-duracal-ph-2-00-25-c-33cy-33cy","title":"Buffer solution DuraCal pH 2.00 (25 °C), colourless, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 2.00 (25 °C) is a colourless laboratory calibration buffer prepared for accurate pH-value determination at the acidic reference point of pH 2.00 (25 °C). It is suited to electrode calibration, meter verification, and routine quality-control work where a stable low-pH standard is needed. Physical data include a density of approximately 1 g\/cm³ and a boiling point of 100 °C. The product is delivered in a 500 ml pack weighing 0,701 kg and is supplied with a DAkkS certificate for traceable documentation of calibration. Offered by manufacturer HAMILTON within the DuraCal range, this buffer supports consistent performance in applications focused on determination of physical properties and pH measurement. Laboratories in analytical chemistry, process monitoring, and environmental testing can use the clear solution for repeated calibration cycles while relying on the certified reference value. The convenient bottle format facilitates bench-top handling during daily instrument checks and method validation requiring a pH 2.00 standard at 25 °C.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 2.00 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 2,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli\u003eCertificate: DAkkS\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33CY-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNjUwNjh8YXBwbGljYXRpb24vcGRmfGFEWmtMMmhtTkM4NU1UWXlPRE15TlRFeE1EQTJMMU5FUWw4ek0wTlpYMGRDWDBWT0xuQmtaZ3xhNDE5NWVmNTJkNTQwNGFmNmIwNGM4YTc0OTg3N2ZiOGIyYWI0MGMwOTUwYWY0MGY5MmIzZDBhMjU1MWI4MTBj\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33CY-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNjUwNjh8YXBwbGljYXRpb24vcGRmfGFEWmtMMmhtTkM4NU1UWXlPRE15TlRFeE1EQTJMMU5FUWw4ek0wTlpYMGRDWDBWT0xuQmtaZ3xhNDE5NWVmNTJkNTQwNGFmNmIwNGM4YTc0OTg3N2ZiOGIyYWI0MGMwOTUwYWY0MGY5MmIzZDBhMjU1MWI4MTBj\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149335998796,"sku":"33CY.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149336031564,"sku":"33CY.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149336064332,"sku":"33CY.1","price":50.22,"currency_code":"EUR","in_stock":true},{"title":"3 liter \/ 1 piece","offer_id":58621747265868,"sku":"33CY.2","price":160.2,"currency_code":"EUR","in_stock":true},{"title":"10 liter \/ 1 piece","offer_id":58621747298636,"sku":"33CY.3","price":342.95,"currency_code":"EUR","in_stock":true},{"title":"25 liter \/ 1 piece","offer_id":58621747331404,"sku":"33CY.4","price":514.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33CY_32e822bb-7260-4aa8-8999-032b94638192.jpg?v=1766434525"},{"product_id":"buffer-solution-duracal-ph-3-06-25-c-33e0-33e0","title":"Buffer solution DuraCal pH 3.06 (25 °C), colourless, with Hamilton certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 3.06 (25 °C) is a colourless, ready-to-use pH calibration standard intended for accurate pH-value determination in laboratory practice. Defined at pH 3.06 measured at 25 °C, it provides a reliable acidic reference point for calibrating pH electrodes and meters. The solution shows a density of about 1 g\/cm³ and a boiling point of 100 °C, and is packed in a 500 ml unit with a weight of 0,701 kg. Each bottle is supplied with a Hamilton certificate, supporting documented calibration procedures. This DuraCal buffer from manufacturer HAMILTON fits workflows in physical-property determination, analytical quality control, and routine instrument verification. Its clear appearance and specified reference value help laboratories maintain measurement consistency across successive calibration steps. The practical pack size suits bench use in research, industrial, and testing environments that require a stable buffer at pH 3.06 (25 °C) for electrode performance checks and method support.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 3.06 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 3,06 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli\u003eCertificate: Hamilton\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E0-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzk0NzR8YXBwbGljYXRpb24vcGRmfGFERTVMMmhtTVM4NU1UWXlPRE15TmpBNU16RXdMMU5FUWw4ek0wVXdYMGRDWDBWT0xuQmtaZ3w3ZmY1MDQyNzNiMThiZGVjMjhjM2I3MmY4ZjkxOGIwNTFjZmY5YjYwMGFhMTBmMjE1ZTdmNjExYzg5MzFjZmFm\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149336228172,"sku":"33E0.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149336260940,"sku":"33E0.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149336293708,"sku":"33E0.1","price":50.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33E0_d06dff4a-4503-4de9-8930-f9b1ca47bbe3.jpg?v=1766434526"},{"product_id":"buffer-solution-duracal-ph-4-01-25-c-33e1-33e1","title":"Buffer solution DuraCal pH 4.01 (25 °C), colourless, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 4.01 (25 °C) is a colourless calibration standard widely used for precise pH-value determination and electrode calibration in analytical laboratories. Specified at pH 4.01 at 25 °C, it serves as a common acidic reference point for meter adjustment, two- or multi-point calibration, and ongoing quality control. The solution has a density of approximately 1 g\/cm³ and a boiling point of 100 °C. It is supplied in a 500 ml pack with a net weight of 0,701 kg and includes a DAkkS certificate for traceable calibration records. Manufactured by HAMILTON as part of the DuraCal series, this buffer supports reliable work in determination of physical properties, routine pH measurement, and instrument verification. The clear formulation and defined reference value promote reproducible results during repeated calibration cycles. Suitable for research, industrial, and environmental laboratories, the convenient bottle format enables straightforward bench-top handling wherever a certified pH 4.01 (25 °C) buffer standard is required.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 4.01 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003epH value: 4,01 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli\u003eCertificate: DAkkS\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E1-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNDEwODV8YXBwbGljYXRpb24vcGRmfGFEUTVMMmhsWVM4NU1UWXlPRE15T0RBMU9URTRMMU5FUWw4ek0wVXhYMGRDWDBWT0xuQmtaZ3wwMDkwN2VmN2E3ZDdiOTY0Mzg5ZmE0N2I1YjBmNDc2YWIzNmJlNmQ1YTg0Mzg3MWUwOTYyMmY0ZjliN2RiYzIw\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E1-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyNDEwODV8YXBwbGljYXRpb24vcGRmfGFEUTVMMmhsWVM4NU1UWXlPRE15T0RBMU9URTRMMU5FUWw4ek0wVXhYMGRDWDBWT0xuQmtaZ3wwMDkwN2VmN2E3ZDdiOTY0Mzg5ZmE0N2I1YjBmNDc2YWIzNmJlNmQ1YTg0Mzg3MWUwOTYyMmY0ZjliN2RiYzIw\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149336555852,"sku":"33E1.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149336588620,"sku":"33E1.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149336621388,"sku":"33E1.1","price":50.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/cr-33E1-1_780987fe-dbd0-4661-ac6f-833fe59debcb.jpg?v=1790328267"},{"product_id":"buffer-solution-duracal-ph-5-00-25-c-33e2-33e2","title":"Buffer solution DuraCal pH 5.00 (25 °C), colourless, with Hamilton certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 5.00 (25 °C) is a colourless calibration buffer for precise pH-value determination and electrode calibration in the laboratory. Defined at the reference temperature of 25 °C, it provides a stable pH 5.00 setpoint for routine and multi-point calibration sequences. The ready-to-use solution is supplied in a 500 ml pack and shows a density of approximately 1 g\/cm³ together with a boiling point of 100 °C, consistent with an aqueous buffer under standard working conditions. Each unit is accompanied by a Hamilton certificate, supporting documented traceability in quality-controlled analytical environments. Offered from manufacturer HAMILTON within the DuraCal range, this colourless buffer is suited to applications in analytical chemistry, quality control, research and teaching laboratories where reliable physical-property measurements are required. Its clear appearance facilitates visual checks during handling, while the practical 500 ml volume supports repeated calibrations without frequent bottle changes. Use this DuraCal pH 5.00 buffer wherever a well-defined acidic reference point is needed alongside other certified pH standards.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 5.00 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003eProduct type: pH buffer solution\u003c\/li\u003e\n\u003cli\u003epH value: 5,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E2-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzk1MTJ8YXBwbGljYXRpb24vcGRmfGFEZzNMMmhsT1M4NU1UWXlPRE15T0RjeE5EVTBMMU5FUWw4ek0wVXlYMGRDWDBWT0xuQmtaZ3w0MTU2NzgyZWI0N2U2YzYzOGEzZThlZDM2NTZiYTQ4MDM3NmVhMGY1NGQwMDQ3YWFmNDk4ZmJmNWNhZjdmODQ3\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149336817996,"sku":"33E2.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149336850764,"sku":"33E2.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149336883532,"sku":"33E2.1","price":50.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33E2_13863e94-8299-4b0f-a304-eb7a8682e19e.jpg?v=1766434527"},{"product_id":"buffer-solution-duracal-ph-6-00-25-c-33e3-33e3","title":"Buffer solution DuraCal pH 6.00 (25 °C), colourless, with Hamilton certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 6.00 (25 °C) is a colourless pH calibration standard intended for accurate electrode adjustment and pH-value determination. Specified at 25 °C, it delivers a defined pH 6.00 reference point suitable for single- or multi-point calibration workflows in analytical and quality-control laboratories. The solution is packed in a convenient 500 ml unit and exhibits a density of about 1 g\/cm³ with a boiling point of 100 °C, reflecting typical aqueous buffer behaviour under ordinary laboratory conditions. A Hamilton certificate is supplied with each bottle, enabling traceable documentation of the buffer value. This DuraCal preparation from manufacturer HAMILTON supports reliable measurements in research, industrial QC and educational settings focused on determination of physical properties. The colourless formulation allows straightforward visual inspection during use, and the 500 ml volume provides ample capacity for repeated calibrations. Integrate this pH 6.00 buffer into routine calibration sequences whenever a near-neutral acidic reference is required together with other DuraCal standards.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 6.00 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003eProduct type: pH buffer solution\u003c\/li\u003e\n\u003cli\u003epH value: 6,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E3-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzk0NzF8YXBwbGljYXRpb24vcGRmfGFEWTFMMmc1T0M4NU1UWXlPRE16TVRBd09ETXdMMU5FUWw4ek0wVXpYMGRDWDBWT0xuQmtaZ3wzMDVhMTk0NWYwODUzMmUzMTY4ZDkxNDJmYTllMGJiMmE2MzRhMzE1MjgwZDJjYWRkOWI2ZjA0MGFjNWIwMTFk\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E3-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzk0NzF8YXBwbGljYXRpb24vcGRmfGFEWTFMMmc1T0M4NU1UWXlPRE16TVRBd09ETXdMMU5FUWw4ek0wVXpYMGRDWDBWT0xuQmtaZ3wzMDVhMTk0NWYwODUzMmUzMTY4ZDkxNDJmYTllMGJiMmE2MzRhMzE1MjgwZDJjYWRkOWI2ZjA0MGFjNWIwMTFk\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149337211212,"sku":"33E3.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149337243980,"sku":"33E3.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149337276748,"sku":"33E3.1","price":50.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33E3.jpg?v=1766434529"},{"product_id":"buffer-solution-duracal-ph-7-00-25-c-33e4-33e4","title":"Buffer solution DuraCal pH 7.00 (25 °C), colourless, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 7.00 (25 °C) is a colourless neutral calibration buffer for precise pH electrode calibration and pH-value determination. Referenced at 25 °C, it offers a stable pH 7.00 setpoint that is widely used as the central point in multi-point calibration schemes. Supplied as a ready-to-use 500 ml pack, the solution has a density of approximately 1 g\/cm³ and a boiling point of 100 °C, in line with standard aqueous buffer properties. Each bottle is provided with a DAkkS certificate, supporting accredited traceability for regulated and quality-managed laboratories. This DuraCal buffer from manufacturer HAMILTON is intended for analytical chemistry, quality control, research and teaching applications that demand dependable physical-property measurements. The colourless appearance simplifies handling checks, while the 500 ml volume suits frequent daily calibrations. Employ this pH 7.00 standard wherever a certified neutral reference is needed within a broader set of DuraCal pH buffers.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 7.00 ±0.02\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003eProduct type: pH buffer solution\u003c\/li\u003e\n\u003cli\u003epH value: 7,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E4-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzcwNDJ8YXBwbGljYXRpb24vcGRmfGFHRTFMMmc1TkM4NU1UWXlPRE16TWpNeE9UQXlMMU5FUWw4ek0wVTBYMGRDWDBWT0xuQmtaZ3xhODE2MzQ4MzU5MjZjMGU1ZDhmZDUwOWFkMWNhMmZjZjIzOTY1YzhiMzE0MTcyM2Q2NDNkNDEzMzI3OTkwYzRl\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E4-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzcwNDJ8YXBwbGljYXRpb24vcGRmfGFHRTFMMmc1TkM4NU1UWXlPRE16TWpNeE9UQXlMMU5FUWw4ek0wVTBYMGRDWDBWT0xuQmtaZ3xhODE2MzQ4MzU5MjZjMGU1ZDhmZDUwOWFkMWNhMmZjZjIzOTY1YzhiMzE0MTcyM2Q2NDNkNDEzMzI3OTkwYzRl\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149337932108,"sku":"33E4.1","price":55.8,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149337964876,"sku":"33E4.1","price":53.01,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149337997644,"sku":"33E4.1","price":50.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/cr-33E4-1_cb7bce23-7eea-48aa-92ab-76825887a546.jpg?v=1790328271"},{"product_id":"buffer-solution-duracal-ph-11-00-25-c-33e7-33e7","title":"Buffer solution DuraCal pH 11.00 (25 °C), colourless, with Hamilton certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 11.00 (25 °C) is a colourless laboratory buffer for reliable pH-value determination and electrode calibration. Defined at pH 11.00 at 25 °C, it provides a stable alkaline reference point for meters, sensors and routine quality-control checks in analytical and process laboratories. The ready-to-use solution has a density of approximately 1 g\/cm³ and a boiling point of 100 °C, supporting straightforward handling under standard bench conditions. It is supplied in a 500 ml pack with a net weight of about 0,701 kg, convenient for regular calibration work without frequent bottle changes. Each unit is accompanied by a Hamilton certificate, giving documented assurance for traceable pH calibration. This DuraCal buffer from manufacturer HAMILTON fits applications in physical-property determination, wet chemistry and general laboratory pH measurement. Clear, colourless appearance allows quick visual inspection before use, while the defined pH specification helps laboratories maintain consistent alkaline calibration points across instruments and shifts.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 11.00 ±0.05\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003eProduct type: pH buffer solution DuraCal\u003c\/li\u003e\n\u003cli\u003epH value: 11,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E7-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzgwMTB8YXBwbGljYXRpb24vcGRmfGFHSmxMMmc0T1M4NU1UWXlPRE16TlRreU16VXdMMU5FUWw4ek0wVTNYMGRDWDBWT0xuQmtaZ3xkNTQyMTg2ZTAwYzYwYzIwMjJiZDMyMzNmOGVmMjVkMmJiY2EyOTNjOGI1NjBlMGIxNjdlYjM3ZmE2ZmM0ZGJm\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149338554700,"sku":"33E7.1","price":61.2,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149338587468,"sku":"33E7.1","price":58.14,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149338620236,"sku":"33E7.1","price":55.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33E7_396c20cf-ef70-448c-a90d-297b948e0ed6.jpg?v=1766434531"},{"product_id":"buffer-solution-duracal-ph-12-00-25-c-33e8-33e8","title":"Buffer solution DuraCal pH 12.00 (25 °C), colourless, with DAkkS certificate","description":"\u003cp\u003eBuffer solution DuraCal pH 12.00 (25 °C) is a colourless calibration buffer formulated for precise pH-value determination at a strongly alkaline reference point. Specified as pH 12.00 at 25 °C, it supports accurate electrode calibration, instrument verification and routine quality control in analytical laboratories. Physical data include a density of about 1 g\/cm³ and a boiling point of 100 °C, facilitating predictable handling in everyday laboratory practice. The solution is offered in a 500 ml pack weighing approximately 0,701 kg, suitable for repeated calibration cycles on pH meters and related sensors. It is supplied with a DAkkS certificate, supporting documented, accredited traceability for demanding measurement environments. This DuraCal buffer from manufacturer HAMILTON is intended for applications in physical-property determination and general pH measurement workflows. Its colourless appearance aids visual checks prior to use, and the clearly defined pH 12.00 specification helps laboratories establish a consistent high-alkaline calibration point across instruments, methods and operators.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/ph-buffers-and-conductivity-standards\"\u003epH buffers \u0026amp; conductivity standards\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/buffers-and-ph-solutions\"\u003eBuffers \u0026amp; pH solutions\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003epH value (25 °C): 12.00 ±0.05\u003c\/li\u003e\n\u003cli\u003ePack size: 500 ml\u003c\/li\u003e\n\u003cli\u003eDensity: ~1 g\/cm³\u003c\/li\u003e\n\u003cli\u003eBoiling point: 100 °C\u003c\/li\u003e\n\u003cli\u003eProduct type: pH buffer solution DuraCal\u003c\/li\u003e\n\u003cli\u003epH value: 12,00 (25 °C)\u003c\/li\u003e\n\u003cli\u003eAppearance: colourless\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eTechnical Information Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E8-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzc2OTl8YXBwbGljYXRpb24vcGRmfGFEVTNMMmc0Tmk4NU1UWXlPRE16Tmprd05qVTBMMU5FUWw4ek0wVTRYMGRDWDBWT0xuQmtaZ3w0ZmNmZGM0N2M2YTNiMjU2YjRiM2Q3MTMwNzkxMDc1MjZkYWFmMWYwYmUyMmRiMjQ5N2EyNmQ4N2FkMTM0MDRj\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"Technical sheet PDF\" aria-label=\"Technical sheet PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"lx-tis-li\"\u003eSafety Data Sheet: \u003ca class=\"sds-link\" href=\"https:\/\/api.carlroth.com\/medias\/SDB-33E8-GB-EN.pdf?context=bWFzdGVyfHNlY3VyaXR5RGF0YXNoZWV0c3wyMzc2OTl8YXBwbGljYXRpb24vcGRmfGFEVTNMMmc0Tmk4NU1UWXlPRE16Tmprd05qVTBMMU5FUWw4ek0wVTRYMGRDWDBWT0xuQmtaZ3w0ZmNmZGM0N2M2YTNiMjU2YjRiM2Q3MTMwNzkxMDc1MjZkYWFmMWYwYmUyMmRiMjQ5N2EyNmQ4N2FkMTM0MDRj\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"display:inline;vertical-align:middle\" title=\"SDS PDF\" aria-label=\"SDS PDF\"\u003e\u003cimg class=\"sds-icon\" src=\"https:\/\/img.icons8.com\/color\/48\/pdf.png\" alt=\"PDF\" width=\"18\" height=\"18\" style=\"width:18px;height:18px;max-width:18px;margin:0;padding:0;display:inline;vertical-align:middle;border:0;\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"500 ml \/ 1 piece","offer_id":56149338751308,"sku":"33E8.1","price":61.2,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 6+ pieces","offer_id":56149338784076,"sku":"33E8.1","price":58.14,"currency_code":"EUR","in_stock":true},{"title":"500 ml \/ 24+ pieces","offer_id":56149338816844,"sku":"33E8.1","price":55.08,"currency_code":"EUR","in_stock":true},{"title":"3 liter \/ 1 piece","offer_id":58621747364172,"sku":"33E8.2","price":149.0,"currency_code":"EUR","in_stock":true},{"title":"25 liter \/ 1 piece","offer_id":58621747396940,"sku":"33E8.3","price":450.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/1000Wx1000H-33E8_166a9054-f07b-4921-8e49-c0ebcaec7b30.jpg?v=1766434531"},{"product_id":"microliter-syringe-7000-5-kh-ey52-ey52","title":"MICROLITER®-syringe 7000.5 KH, 90° grinding, blunt, L 70 mm, 0.5 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7000.5 KH is a precision microlitre syringe for laboratory liquid handling at a nominal volume of 0,5 µl. The instrument features a needle with 90° grinding and a blunt tip, together with a needle length L of 70 mm, supporting controlled delivery in analytical, chromatographic sample introduction, and other low-volume dispensing tasks. Built for Hamilton microlitre syringe workflows, the 7000.5 KH format is suited to applications that demand repeatable sub-microlitre transfers with a fixed blunt needle geometry. The syringe is offered as 1 pc from manufacturer HAMILTON and integrates into existing MICROLITER® setups where the KH configuration and 70 mm needle length are already established. Its compact form and 0,040 kg weight make it practical for bench use beside related syringes and spare needles. Laboratories working with very small sample or standard aliquots can deploy this model where a 0,5 µl capacity, blunt 90° tip, and defined needle length are specified. The product belongs to the Hamilton microlitre syringe family used across general labware and liquid-handling stations.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/disposable-syringes\"\u003eDisposable syringes\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/syringes-and-needles\"\u003eSyringes \u0026amp; needles\u003c\/a\u003e. See also \u003ca href=\"\/en-fr\/collections\/luer-connectors-and-adapters\"\u003eLuer connectors \u0026amp; adapters\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eModel: MICROLITER® syringe 7000.5 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 0,5 µl\u003c\/li\u003e\n\u003cli\u003eNeedle tip: 90° grinding, blunt\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0,040 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56181600387404,"sku":"EY52.1","price":157.6,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56181600420172,"sku":"EY52.1","price":149.72,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56181600452940,"sku":"EY52.1","price":141.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_dc3d52cd-6247-42d9-8024-19e585b2753b.jpg?v=1766476159"},{"product_id":"microliter-syringe-7001-kh-ey53-ey53","title":"MICROLITER®-syringe 7001 KH, 90° grinding, blunt, L 70 mm, 1.0 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7001 KH is a laboratory microlitre syringe with a nominal volume of 1,0 µl for precise liquid handling. It is equipped with a blunt needle finished with 90° grinding and a needle length L of 70 mm, providing a defined geometry for sample introduction, standard preparation, and other low-volume transfers. The 7001 KH configuration aligns with Hamilton MICROLITER® syringe practice, enabling consistent use wherever this model series and tip style are specified. Supplied as 1 pc from manufacturer HAMILTON, the syringe supports routine analytical and research workflows that require a fixed 1,0 µl capacity rather than adjustable large-volume devices. The blunt 90° tip is appropriate when a non-bevelled needle is preferred for delivery into septa, ports, or open vessels under controlled conditions. At a weight of 0,040 kg, the unit is easy to handle and store with related microlitre accessories. This syringe sits within the broader Hamilton microlitre syringe category used in liquid-handling and labware setups that standardise on KH-style needles of 70 mm length.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/disposable-syringes\"\u003eDisposable syringes\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/syringes-and-needles\"\u003eSyringes \u0026amp; needles\u003c\/a\u003e. See also \u003ca href=\"\/en-fr\/collections\/luer-connectors-and-adapters\"\u003eLuer connectors \u0026amp; adapters\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eModel: MICROLITER® syringe 7001 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 1,0 µl\u003c\/li\u003e\n\u003cli\u003eNeedle tip: 90° grinding, blunt\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0,040 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56181600485708,"sku":"EY53.1","price":122.45,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56181600518476,"sku":"EY53.1","price":116.33,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56181600551244,"sku":"EY53.1","price":110.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_cf8b8d25-9191-46af-9c09-520851a12903.jpg?v=1766476159"},{"product_id":"microliter-syringe-7002-kh-ey54-ey54","title":"MICROLITER®-syringe 7002 KH, 90° grinding, blunt, L 70 mm, 2.0 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7002 KH is a precision microlitre syringe rated at 2,0 µl for laboratory liquid-handling applications. The syringe carries a blunt needle with 90° grinding and a needle length L of 70 mm, giving a clear mechanical profile for repeatable small-volume dispensing. It is intended for Hamilton MICROLITER® workflows in which the 7002 KH model, KH tip style, and 70 mm needle length are the established choice for sample transfer, calibration solutions, or analytical preparation. Offered as 1 pc from manufacturer HAMILTON, this syringe complements other members of the same series that share the blunt 90° needle design while differing in nominal volume. The 2,0 µl capacity addresses tasks that sit above sub-microlitre work yet still require tight volume control compared with conventional laboratory syringes. With a weight of 0,037 kg, the instrument is convenient for everyday bench use and organised storage beside spare needles and related accessories. It belongs to the Hamilton microlitre syringe range used across liquid-handling and general labware environments that specify fixed-volume KH syringes.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/disposable-syringes\"\u003eDisposable syringes\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/syringes-and-needles\"\u003eSyringes \u0026amp; needles\u003c\/a\u003e. See also \u003ca href=\"\/en-fr\/collections\/luer-connectors-and-adapters\"\u003eLuer connectors \u0026amp; adapters\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eModel: MICROLITER® syringe 7002 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 2,0 µl\u003c\/li\u003e\n\u003cli\u003eNeedle tip: 90° grinding, blunt\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0,037 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56181600584012,"sku":"EY54.1","price":151.5,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56181600616780,"sku":"EY54.1","price":143.93,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56181600649548,"sku":"EY54.1","price":136.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_411587a8-8a10-4eaf-9115-65b73b1c9d4c.jpg?v=1766476159"},{"product_id":"microliter-syringe-7105-kh-ey55-ey55","title":"MICROLITER®-syringe 7105 KH, 90° grinding, blunt, L 70 mm, 5.0 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7105 KH is a precision microlitre syringe designed for accurate liquid handling in analytical and laboratory workflows. It delivers a nominal volume of 5,0 µl and is fitted with a blunt needle finished with a 90° grind and a working length of 70 mm, supporting controlled sample introduction and transfer. The syringe is intended for routine microlitre dosing, chromatography sample preparation, and other applications where small, reproducible volumes are required. Supplied as a single unit from manufacturer HAMILTON, the 7105 KH model belongs to the established MICROLITER® range used across research, quality control, and method-development laboratories. Its compact format and defined needle geometry help maintain consistency when working with limited sample amounts. The article is offered as 1 pc and has a net weight of 0,040 kg, making it straightforward to stock as a dedicated spare or dedicated-application syringe. Categories cover labware liquid handling and Hamilton microlitre syringes, aligning the product with standard bench and instrument accessory inventories.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/microlitre-syringes\"\u003eMicrolitre syringes\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/syringes-and-needles\"\u003eSyringes \u0026amp; needles\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: MICROLITER® syringe\u003c\/li\u003e\n\u003cli\u003eModel: 7105 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 5,0 µl\u003c\/li\u003e\n\u003cli\u003eNeedle tip: 90° grinding, blunt\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56181600682316,"sku":"EY55.1","price":142.1,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56181600715084,"sku":"EY55.1","price":135.0,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56181600747852,"sku":"EY55.1","price":127.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H.jpg?v=1766476159"},{"product_id":"microliter-syringe-7000-5-kh-x056-x056","title":"MICROLITER®-syringe 7000.5 KH, 12° grinding, L 70 mm, 0.5 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7000.5 KH is a precision microlitre syringe for demanding small-volume work in analytical laboratories. The model delivers a 0,5 µl capacity with a needle length of 70 mm and a 12° grinding angle, supporting controlled sample introduction in gas chromatography accessory applications. Supplied as 1 pc, this syringe is suited to GC workflows where accurate sub-microlitre handling and a defined bevel geometry are required. The 7000.5 KH format from manufacturer HAMILTON is positioned among chromatography accessories for laboratories that standardise on MICROLITER® syringes for injection and transfer tasks. Unit weight is 0,040 kg, which is convenient for bench organisation and instrument-side storage. With its short fixed volume of 0,5 µl, L 70 mm needle and 12° grind, the syringe supports reproducible introduction of minute sample aliquots in gas chromatographic methods. It is intended for users who need a dedicated 7000.5 KH microlitre syringe rather than a general laboratory dispenser, aligning capacity, length and tip geometry with established GC accessory practice in research and routine analytical settings.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/gc-liners-septa-syringes-and-accessories\"\u003eGC liners, septa, syringes \u0026amp; accessories\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/gc-columns-and-accessories\"\u003eGC columns \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: MICROLITER® syringe 7000.5 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 0,5 µl\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eGrinding angle: 12°\u003c\/li\u003e\n\u003cli\u003eWeight: 0,040 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56186594459980,"sku":"X056.1","price":157.6,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56186594492748,"sku":"X056.1","price":149.72,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56186594525516,"sku":"X056.1","price":141.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_e5ca616d-c710-4ddf-83a5-677deb59996d.jpg?v=1766500383"},{"product_id":"microliter-syringe-7001-kh-x057-x057","title":"MICROLITER®-syringe 7001 KH, 12° grinding, L 70 mm, 1.0 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7001 KH is a precision microlitre syringe designed for accurate small-volume sample handling in analytical and chromatography laboratories. It offers a 1,0 µl capacity, a needle length of 70 mm and a 12° grinding angle, making it suitable for controlled injection and transfer steps in gas chromatography accessory use. Supplied as 1 pc, the 7001 KH model supports GC workflows that depend on defined microlitre volumes and a consistent bevel geometry. This syringe from manufacturer HAMILTON belongs to the MICROLITER® range used where reproducible introduction of minute aliquots is essential. The unit weight is 0,040 kg, facilitating straightforward placement beside chromatographs and sample-preparation stations. Combining 1,0 µl volume, L 70 mm needle length and 12° grinding, it addresses routine and method-development needs in gas chromatographic applications that specify the 7001 KH format. Laboratories standardising on MICROLITER® syringes can integrate this instrument as a dedicated 1,0 µl option for GC accessories, supporting reliable sample introduction without expanding into unrelated dispensing hardware beyond the stated chromatographic accessory role.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/gc-liners-septa-syringes-and-accessories\"\u003eGC liners, septa, syringes \u0026amp; accessories\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/gc-columns-and-accessories\"\u003eGC columns \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: MICROLITER® syringe 7001 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 1,0 µl\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eGrinding angle: 12°\u003c\/li\u003e\n\u003cli\u003eWeight: 0,040 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56186594558284,"sku":"X057.1","price":122.45,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56186594591052,"sku":"X057.1","price":116.33,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56186594623820,"sku":"X057.1","price":110.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_43e8da33-8933-4437-83ca-b551bf68ac96.jpg?v=1766500383"},{"product_id":"microliter-syringe-7002-kh-x058-x058","title":"MICROLITER®-syringe 7002 KH, 12° grinding, L 70 mm, 2.0 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7002 KH is a precision microlitre syringe for controlled small-volume work in analytical laboratories focused on chromatography. Specified at 2,0 µl capacity with a needle length of 70 mm and a 12° grinding angle, it supports accurate sample introduction within gas chromatography accessory setups. The syringe is supplied as 1 pc and suits GC applications that require a defined 2,0 µl volume together with consistent tip geometry. From manufacturer HAMILTON, the 7002 KH model forms part of the MICROLITER® syringe family used for injection and microlitre transfer tasks in chromatographic practice. Unit weight is 0,050 kg, which is practical for bench storage and instrument-side organisation. With its 2,0 µl rating, L 70 mm needle and 12° grind, the syringe enables reproducible handling of small aliquots in gas chromatographic methods and related accessory workflows. It is intended for laboratories that specify the 7002 KH format rather than generic dispensers, aligning volume, length and bevel with established GC accessory requirements in routine analysis and method work where reliable microlitre performance is needed.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/gc-liners-septa-syringes-and-accessories\"\u003eGC liners, septa, syringes \u0026amp; accessories\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/gc-columns-and-accessories\"\u003eGC columns \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: MICROLITER® syringe 7002 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 2,0 µl\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eGrinding angle: 12°\u003c\/li\u003e\n\u003cli\u003eWeight: 0,050 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56186594689356,"sku":"X058.1","price":149.1,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56186594722124,"sku":"X058.1","price":141.65,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56186594754892,"sku":"X058.1","price":134.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_efaf0d53-8d80-4b74-b17c-b7219e71f49a.jpg?v=1766500384"},{"product_id":"microliter-syringe-7105-kh-x059-x059","title":"MICROLITER®-syringe 7105 KH, 12° grinding, L 70 mm, 5.0 µl, 1 pc","description":"\u003cp\u003eMICROLITER® syringe 7105 KH is a precision microlitre syringe intended for accurate small-volume handling in analytical workflows, notably gas chromatography (GC) sample introduction and related laboratory dosing tasks. The model is specified for a working volume of 5,0 µl and features a needle length of 70 mm with a 12° grinding tip geometry, supporting controlled penetration and delivery in GC accessories setups. Supplied as a single unit, the syringe weighs 0,050 kg and is designed for routine laboratory use where microlitre-scale reproducibility matters. This MICROLITER® 7105 KH configuration comes from manufacturer HAMILTON and fits chromatography accessory lines used alongside GC instrumentation. The compact format suits benches that require dedicated low-volume syringes without bulk packaging. Laboratories working in applications, chromatography, and GC accessory selection can integrate the 7105 KH where a defined 5,0 µl capacity, 70 mm needle length, and 12° tip grind are specified. Clear dimensional and volume data help match the syringe to existing methods and injector interfaces while keeping inventory simple with a one-piece pack.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/gc-liners-septa-syringes-and-accessories\"\u003eGC liners, septa, syringes \u0026amp; accessories\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/gc-columns-and-accessories\"\u003eGC columns \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: MICROLITER® syringe 7105 KH\u003c\/li\u003e\n\u003cli\u003eVolume: 5,0 µl\u003c\/li\u003e\n\u003cli\u003eNeedle length: 70 mm\u003c\/li\u003e\n\u003cli\u003eTip geometry: 12° grinding\u003c\/li\u003e\n\u003cli\u003eWeight: 0,050 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56186594787660,"sku":"X059.1","price":140.9,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56186594820428,"sku":"X059.1","price":133.86,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56186594853196,"sku":"X059.1","price":126.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X056-1000Wx1000H_8dffe9d0-0854-4dfa-bee8-b674e570f0d6.jpg?v=1766500385"},{"product_id":"standard-gc-syringe-701-asn-23s-x060-x060","title":"Standard-GC-syringe 701 ASN 23S, st. steel, L 43mm, 10µl, needle-Ø 0.34mm","description":"\u003cp\u003eStandard GC syringe 701 ASN 23S is a stainless-steel gas chromatography syringe configured for routine sample injection and related GC accessory work. It offers a 10 µl capacity with a needle length of 43 mm and a needle diameter of 0,34 mm, giving a defined geometry for standard GC workflows. The unit is supplied as 1 pc and has a stated weight of 0,025 kg, making it a compact choice for instrument-side stock. Manufactured by HAMILTON, the 701 ASN 23S belongs to the standard GC syringe family used in chromatography laboratories that specify steel construction and fixed needle dimensions. Categories covering applications, chromatography, gas chromatography, and GC accessories reflect its intended placement beside GC systems. Clear volume and needle data—10 µl, 43 mm length, 0,34 mm diameter—support method matching and spare-part planning without ambiguity. The single-piece pack keeps ordering straightforward for labs that replace or dedicate syringes per instrument or method.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/gc-liners-septa-syringes-and-accessories\"\u003eGC liners, septa, syringes \u0026amp; accessories\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/gc-columns-and-accessories\"\u003eGC columns \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: Standard GC syringe 701 ASN 23S\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eVolume: 10 µl\u003c\/li\u003e\n\u003cli\u003eNeedle length: 43 mm\u003c\/li\u003e\n\u003cli\u003eNeedle diameter: 0,34 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56186594885964,"sku":"X060.1","price":75.05,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56186594918732,"sku":"X060.1","price":71.3,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56186594951500,"sku":"X060.1","price":67.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X060-1000Wx1000H.jpg?v=1766500385"},{"product_id":"standard-gc-syringe-701-asn-26s-x061-x061","title":"Standard-GC-syringe 701 ASN 26S, st. steel, L 43mm, 10µl, needle-Ø 0.13mm","description":"\u003cp\u003eStandard GC syringe 701 ASN 26S is a stainless-steel syringe for gas chromatography sample handling and GC accessory use. Specifications include a 10 µl volume, a needle length of 43 mm, and a fine needle diameter of 0,13 mm, suited to methods that call for a narrower needle profile. Packaged as 1 pc with a weight of 0,025 kg, the syringe is easy to stock beside GC instruments. This 701 ASN 26S model is from manufacturer HAMILTON and aligns with standard GC syringe selections in chromatography laboratories. Application context spans general laboratory applications, chromatography, gas chromatography (GC), and dedicated GC accessories where steel construction and fixed needle dimensions are required. Documented measures—10 µl capacity, 43 mm needle length, and 0,13 mm needle diameter—help laboratories confirm compatibility with injectors and established protocols. The single-unit pack supports targeted replacement and method-specific syringe assignment without multi-pack overhead.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/gc-liners-septa-syringes-and-accessories\"\u003eGC liners, septa, syringes \u0026amp; accessories\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/gc-columns-and-accessories\"\u003eGC columns \u0026amp; accessories\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: Standard GC syringe 701 ASN 26S\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eVolume: 10 µl\u003c\/li\u003e\n\u003cli\u003eNeedle length: 43 mm\u003c\/li\u003e\n\u003cli\u003eNeedle diameter: 0,13 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAMILTON","offers":[{"title":"1 pc \/ 1 piece","offer_id":56186595017036,"sku":"X061.1","price":78.0,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 6+ pieces","offer_id":56186595049804,"sku":"X061.1","price":74.1,"currency_code":"EUR","in_stock":true},{"title":"1 pc \/ 24+ pieces","offer_id":56186595082572,"sku":"X061.1","price":70.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/X060-1000Wx1000H_8c67c98c-fff8-46cc-a801-cafa24fce8e6.jpg?v=1766500386"},{"product_id":"tub-ptfe-116x132x","title":"Tub PTFE 1\/16''x1\/32''x**","description":"\u003cp\u003ePTFE tubing 1\/16'' × 1\/32'' × ** is a fluoropolymer laboratory tube intended for fluid handling and connection tasks in analytical and research environments. The stated dimensions of 1\/16 inch by 1\/32 inch define the tubing geometry for precise instrument and sample-line interfaces. This PTFE hose format supports routing of liquids and gases where chemical resistance and dimensional consistency of the polymer are required. Offered as a single piece, the tubing belongs to the PTFE-Schlauch category used across general laboratory workflows. The product is available from manufacturer Hamilton and is suitable for professional lab setups that specify the 1\/16'' × 1\/32'' size. Its construction as polytetrafluoroethylene tubing addresses everyday needs for connecting apparatus, transferring reagents and maintaining clean fluid paths. Originating from Romania, the item is supplied for laboratory use without further performance or purity claims beyond the material identity and dimensional designation given. This PTFE tubing provides a straightforward conduit solution for standard fluidic configurations in the laboratory.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/pvc-ptfe-and-other-tubing\"\u003ePVC, PTFE \u0026amp; other tubing\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: PTFE\u003c\/li\u003e\n\u003cli\u003eDimensions: 1\/16'' × 1\/32'' × **\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57933637943628,"sku":"20943","price":35.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-20943.png?v=1783730743"},{"product_id":"tub-ptfe-173x113x","title":"Tub PTFE 1.73x1.13x**","description":"\u003cp\u003ePTFE tubing 1,73 × 1,13 × ** is a polytetrafluoroethylene tubing product supplied for laboratory hose applications. The tubing is manufactured from the material Polytetrafluorethylen (PTFE) and carries the dimensional designation 1,73 × 1,13 × **. It is offered in a pack size of 1 pc and belongs to the PTFE-Schlauch category within broader laboratory hose classifications that also cover PP, PVC, PE, silicone and rubber tubing types. Available from manufacturer Hamilton, the item originates in Romania and matches the reference short description Tub PTFE 1.73x1.13x**. This PTFE tubing serves as a straightforward conduit option in scientific and technical environments where fluoropolymer tubing is specified. The product identity centres on the stated PTFE material and the precise 1,73 × 1,13 × ** sizing, ensuring clear selection among comparable laboratory tubing articles. All listed attributes derive directly from the available material, dimensional and packaging data without extension beyond those parameters.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/pvc-ptfe-and-other-tubing\"\u003ePVC, PTFE \u0026amp; other tubing\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluorethylen (PTFE)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1,73 × 1,13 × **\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57933627457868,"sku":"20918","price":14.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-20918.png?v=1783730644"},{"product_id":"tub-ptfe-18x","title":"Tub PTFE 1\/8''x**","description":"\u003cp\u003ePTFE tubing 1\/8'' × ** is a flexible laboratory tube manufactured from polytetrafluoroethylene (PTFE) for fluid-transfer applications. The chemically inert PTFE material offers excellent resistance to a wide range of solvents, acids and bases, making the tubing suitable for demanding analytical and preparative work. Supplied as a single-piece unit, this Hamilton tubing provides a reliable conduit for sample delivery, reagent lines or waste streams in chromatography, titration and general laboratory setups. The 1\/8'' dimension supports standard fittings commonly used in laboratory fluidic systems. Originating from Romania, the product belongs to the PTFE-Schlauch category and meets the requirements of routine laboratory tubing needs. Its non-reactive surface minimises adsorption and contamination risks during transfer of sensitive solutions. Laboratory personnel select this tubing when chemical compatibility and thermal stability are priorities. The plain PTFE construction ensures straightforward cutting and connection without specialised tools, facilitating quick integration into existing apparatus.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/pvc-ptfe-and-other-tubing\"\u003ePVC, PTFE \u0026amp; other tubing\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1\/8'' × **\u003c\/li\u003e\n\u003cli\u003eProduct type: Laboratory tubing\u003c\/li\u003e\n\u003cli\u003eOrigin country: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57933635977548,"sku":"20941","price":20.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-20941.png?v=1783730725"},{"product_id":"tub-ptfe-18x116x","title":"Tub PTFE 1\/8''x1\/16''x**","description":"\u003cp\u003ePTFE tubing 1\/8'' × 1\/16'' × ** is a precision laboratory tube produced from polytetrafluoroethylene for controlled fluid handling. The dual-dimension specification (1\/8'' outer by 1\/16'' inner) allows secure connection to standard laboratory fittings while maintaining a defined internal bore for consistent flow. PTFE delivers outstanding chemical inertness toward aggressive reagents, organic solvents and aqueous media, reducing the risk of leaching or sample interaction. Offered as a single-piece unit from manufacturer Hamilton, the tubing is well suited for HPLC lines, peristaltic pump segments, gas sampling or general reagent transfer. Its placement within the PTFE-Schlauch product family underscores suitability for chemically demanding environments. Originating from Romania, the tubing supports clean, low-adsorption pathways essential in analytical chemistry and life-science workflows. Users appreciate the ease of cutting and flaring PTFE for custom lengths. The material’s thermal and mechanical stability further ensures reliable performance across typical laboratory temperature ranges without compromising dimensional integrity.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/pvc-ptfe-and-other-tubing\"\u003ePVC, PTFE \u0026amp; other tubing\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eDimensions: 1\/8'' × 1\/16'' × **\u003c\/li\u003e\n\u003cli\u003eProduct type: Laboratory tubing\u003c\/li\u003e\n\u003cli\u003eOrigin country: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57933636960588,"sku":"20942","price":35.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-20942.png?v=1783730733"},{"product_id":"tub-ptfe-1xluer-f-18x","title":"TUB PTFE 1xLUER F 1\/8''x**","description":"\u003cp\u003ePTFE tubing with 1× Luer female connection and 1\/8'' × ** geometry is a chemically inert fluid-handling component for laboratory liquid transfer. Made from polytetrafluoroethylene (PTFE), the tubing resists aggressive solvents, acids, and bases and supports low-extractable sample paths in analytical and preparative work. The single Luer female interface enables secure coupling to syringes, valves, manifolds, and other Luer-compatible fittings, helping maintain leak-resistant joints during routine instrument use. Offered as one piece from manufacturer Hamilton, this PTFE line suits chromatography support tubing, reagent feed, and general sample routing where dimensional stability and broad chemical compatibility are required. PTFE construction is well established for demanding media while remaining easy to integrate into existing lab fluid systems. Use it wherever a compact Luer-ended PTFE hose segment is needed for clean, reliable connections between modules, reservoirs, or handheld devices in research and quality-control environments.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eDimension: 1\/8'' × **\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE laboratory tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934109770060,"sku":"90691","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90691.png?v=1783730680"},{"product_id":"tub-ptfe-1xluer-f-29x2x","title":"TUB PTFE 1xLUER F 2.9X2X**","description":"\u003cp\u003ePTFE tubing with one Luer female connection is a chemically inert laboratory fluid line for demanding transfer and sampling tasks. Manufactured from polytetrafluoroethylene (PTFE), the tubing offers outstanding resistance to aggressive solvents, acids and bases while maintaining a smooth, low-friction inner surface that supports clean flow and easy purging. The stated cross-section of 2,9×2 mm suits compact instrument interfaces and precision liquid handling where dimensional stability matters. A single Luer female fitting enables quick, tool-free coupling to syringes, valves and manifold ports commonly used in analytical and preparative workflows. Supplied as a single piece from manufacturer Hamilton, this PTFE hose is intended for laboratory and process setups that require non-reactive wetted materials and reliable mechanical integrity. Typical uses include reagent delivery, sample transfer between modules, and temporary connections on benches or automated systems. The material choice supports repeated exposure to harsh media without swelling or extractables concerns associated with many elastomers, making the tubing a practical component for chromatography support lines, titration setups and general wet-chemistry routing.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eDimensions: 2,9×2 mm\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE laboratory tubing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934068482380,"sku":"90662","price":53.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90662.png?v=1783731815"},{"product_id":"tub-ptfe-1xluer-f-29x2x300","title":"TUB PTFE 1xLUER F 2.9X2X300","description":"\u003cp\u003ePTFE tubing with one Luer female connection, dimensioned 2,9×2×300, is a compact laboratory hose assembly for controlled fluid transfer. Manufactured from polytetrafluoroethylene (PTFE), the tube combines the stated outer and inner dimensions with a 300 mm working length and a single female Luer interface for straightforward coupling to matching Luer fittings. The configuration supports neat routing on benches, instruments and small fluidic setups where a short, chemically inert PTFE line with a defined Luer end is required. Supplied as a single piece from manufacturer Hamilton, this tubing item is intended for laboratory and analytical workflows that call for PTFE hose with a female Luer termination. Clear dimensional marking (2,9×2×300) simplifies selection against existing Luer hardware and system layouts. The unit is offered as one piece, ready for integration into sampling, reagent delivery or general fluid-handling paths that benefit from PTFE tubing and a standardised Luer female connection.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eDimensions: 2,9 × 2 × 300 mm\u003c\/li\u003e\n\u003cli\u003eLength: 300 mm\u003c\/li\u003e\n\u003cli\u003eEAN: 4046681003349\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934011105612,"sku":"90612_70","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90612_70.png?v=1783731543"},{"product_id":"tub-ptfe-1xluer-f-2x1x","title":"TUB PTFE 1xLUER F 2X1X**","description":"\u003cp\u003ePTFE tubing with 1× Luer female connection, 2×1×**, is a laboratory fluid-transfer component fabricated from polytetrafluoroethylene (PTFE). PTFE lines are routinely chosen for solvent and reagent routing because the polymer offers broad chemical compatibility and a low-adhesion surface for clean fluid passage. The single Luer female end provides a standardised interface to Luer-compatible syringes, valves, manifolds, and instrument ports used in liquid handling and sample delivery. The 2×1×** designation specifies the dimensional configuration of this tubing variant so it can be matched to the required path geometry and connector set. Supplied as 1 pc, the article is intended for individual line assembly, replacement, or dedicated transfer segments on benchtop systems. This PTFE tubing product from manufacturer Hamilton sits within laboratory hose and PTFE tubing assortments used when flexible polymer fluidics are preferred over rigid glass or metal. Material, Luer female termination, and the 2×1×** specification form the primary selection criteria for catalogue and instrument matching. Install and use in accordance with normal laboratory practice for PTFE fluidic accessories and Luer connections.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eSpecification: 2×1×**\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eEAN: 4033378404862\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934085259596,"sku":"90668_70","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90668_70.png?v=1783730627"},{"product_id":"tub-ptfe-1xluer-f-2x1x300","title":"TUB PTFE 1xLUER F 2X1X300","description":"\u003cp\u003ePTFE tubing, 1× Luer female, 2×1×300 is a laboratory tubing component made from polytetrafluoroethylene (PTFE) and equipped with one Luer female connector. The 2×1×300 designation specifies the dimensional format of this PTFE line for fluid transfer and interconnection duties in analytical, chemical and life-science laboratories. PTFE provides a chemically resistant polymer pathway suited to reagents and samples that require inert handling. Offered as 1 pc, the tubing can be fitted into bench-top fluidic assemblies, syringe systems or instrument ports that use Luer female interfaces. The single Luer female end supports reliable coupling to compatible Luer fittings common in laboratory fluid handling. This PTFE tubing article from manufacturer Hamilton forms part of the PTFE hose range and is intended for everyday laboratory connection work. The polymer construction supports flexible, chemically stable lines wherever dedicated Luer-compatible PTFE tubing is specified. Single-piece packaging keeps replenishment straightforward for research, method-development and quality-control setups that rely on the 2×1×300 PTFE tubing configuration.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eDimensions: 2×1×300\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934029095244,"sku":"90618","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90618.png?v=1783731592"},{"product_id":"tub-ptfe-1xluer-f-ga10x","title":"TUB PTFE 1xLUER F GA10X**","description":"\u003cp\u003ePTFE tubing with 1× Luer female connection, GA10×**, is a laboratory hose component made from polytetrafluoroethylene (PTFE) for fluid-handling setups that require a female Luer interface. The tubing designation TUB PTFE 1xLUER F GA10X** identifies the material, the single female Luer end, and the GA10×** size format used in matching laboratory assemblies. PTFE is specified as the construction material, supporting use where a chemically robust polymer line is needed between instruments, syringes, or manifold ports fitted with compatible Luer geometry. Supplied as a single piece from manufacturer Hamilton, the item suits workstations that standardise on GA10-format PTFE lines with one female Luer termination. Country of origin is Romania. The product belongs to the PTFE tubing category within laboratory hose assortments and is intended for integration into existing Luer-based fluid paths without altering the stated connection or gauge coding. Pack presentation is 1 pc, allowing direct allocation to a bench kit, spare-parts drawer, or instrument-specific tubing set while keeping material and connection type clearly defined.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize format: GA10×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934062354764,"sku":"90660","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90660.png?v=1783731790"},{"product_id":"tub-ptfe-1xluer-f-ga10x300","title":"TUB PTFE 1xLUER F GA10X300","description":"\u003cp\u003ePTFE tubing with one Luer female connection in the GA10×300 configuration is a laboratory fluid-handling component manufactured from polytetrafluoroethylene (PTFE). The article name combines a single female Luer interface with the GA10×300 size designation, providing an unambiguous reference for procurement and instrument compatibility. Delivered as one piece, the tubing suits applications in which PTFE line sections with a defined Luer female end are required for sample transfer, dispensing or analytical fluid paths. Material is specified as polytetrafluoroethylene (PTFE), placing the product in the PTFE tubing group used for laboratory hoses and connector assemblies. The GA10×300 geometry together with the 1× Luer female termination sets the connection standard, enabling direct mating to compatible Luer male fittings when the counterpart matches. This tubing from manufacturer Hamilton is supplied as an individual unit for assembly, replacement or spare-part stock on benches and modular systems that call for PTFE with a female Luer finish. Origin is listed as Romania. Laboratories that standardise on PTFE tubing with explicit Luer geometry can identify the GA10×300 variant by designation, material and single-piece pack without reference to unstated performance grades. All stated attributes follow the manufacturer designation and scientific specifications.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize designation: GA10×300\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eEAN: 4046681003325\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934008910156,"sku":"90610_70","price":39.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90610_70.png?v=1783731525"},{"product_id":"tub-ptfe-1xluer-f-ga11x","title":"TUB PTFE 1xLUER F GA11X**","description":"\u003cp\u003ePTFE tubing with 1× Luer female connection, GA11×**, is a laboratory hose component manufactured from polytetrafluoroethylene (PTFE) for fluid paths that terminate in a female Luer fitting at the GA11×** size format. The designation TUB PTFE 1xLUER F GA11X** states the polymer type, the single female Luer interface, and the GA11×** gauge coding used to match compatible syringes, adapters, or instrument ports. Specifying PTFE as the tubing material addresses applications that call for a fluoropolymer line together with a defined Luer female end rather than an open hose cut. Offered as 1 pc from manufacturer Hamilton, the article fits spare provisioning and instrument-specific tubing kits where GA11-format PTFE with one female Luer is the required standard. Origin is Romania. Within laboratory hose ranges it is classified under PTFE tubing, keeping material, connection style, and size code explicit for inventory and method documentation. The single-piece unit quantity supports straightforward allocation to a workstation or replacement stock without changing the stated Luer or gauge configuration.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize format: GA11×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934063370572,"sku":"90661","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90661.png?v=1783731796"},{"product_id":"tub-ptfe-1xluer-f-ga11x300","title":"TUB PTFE 1xLUER F GA11X300","description":"\u003cp\u003ePTFE tubing with one Luer female connection, specified as GA11×300, provides a chemically resistant fluid path for laboratory liquid handling and instrument interfaces. Manufactured from polytetrafluoroethylene (PTFE), the tubing is suited to setups that demand a non-reactive polymer line for transferring reagents, solvents, or sample streams under controlled laboratory conditions. The single Luer female end supports secure coupling to matching Luer male fittings, syringes, or manifold ports commonly used in analytical and preparative work. This GA11×300 configuration from manufacturer Hamilton is offered as a single-piece unit, simplifying replacement and configuration of dedicated lines. PTFE construction supports use where chemical inertness and clean fluid contact surfaces are priorities within hose and tubing assemblies. The compact one-piece pack is convenient for instrument service kits, method development benches, and modular fluidic systems that standardize on Luer connections. Clear designation of the Luer female interface and GA11×300 geometry helps ensure correct selection when matching existing Hamilton-compatible or Luer-based laboratory hardware.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eSpecification: GA11×300\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eEAN: 4046681003332\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934009958732,"sku":"90611_70","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90611_70.png?v=1783731534"},{"product_id":"tub-ptfe-1xluer-f-ga13x","title":"TUB PTFE 1xLUER F GA13X**","description":"\u003cp\u003ePTFE tubing with one Luer female connection in GA13 size is a chemically resistant fluid line for laboratory liquid handling and instrument interfacing. The polytetrafluoroethylene (PTFE) construction provides broad inertness toward solvents, acids and bases, together with a smooth bore that favours low carry-over and straightforward flushing between samples or reagents. Gauge designation GA13 defines the tubing calibre for compatibility with corresponding Luer-based syringes, adapters and valve ports used in analytical and preparative setups. A single Luer female end supports rapid, secure coupling without tools, helping operators reconfigure flow paths on the bench or within modular systems. Supplied as one piece from manufacturer Hamilton, the hose is intended for applications that demand non-reactive wetted surfaces and dependable mechanical performance under typical laboratory pressures. Common uses include reagent feed lines, sample transfer between modules, temporary bypass connections and support tubing around titration or chromatography accessories. PTFE’s thermal and chemical stability make this GA13 Luer female tubing a practical consumable wherever elastomeric hoses would swell, leach or degrade.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA13\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE laboratory tubing\u003c\/li\u003e\n\u003cli\u003eEAN: 4033378255686\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934073790796,"sku":"90663_70","price":49.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90663_70.png?v=1783730582"},{"product_id":"tub-ptfe-1xluer-f-ga13x300","title":"TUB PTFE 1xLUER F GA13X300","description":"\u003cp\u003ePTFE tubing with one Luer female connection in size GA13×300 provides a gauge-defined laboratory hose segment for fluid transfer applications. The tube is made of polytetrafluoroethylene (PTFE) and combines a GA13 profile with a 300 mm length and a single female Luer end for direct mating to compatible Luer connectors. This format suits instrument lines, sampling paths and compact fluidic assemblies where a short PTFE tube with a standardised Luer female termination is preferred. From manufacturer Hamilton, the product is supplied as one piece, allowing straightforward stock-keeping and replacement of GA13 PTFE lines. The GA13×300 designation clarifies gauge and length for matching existing hardware, while the PTFE material designation identifies the hose polymer. Ideal for laboratory setups that specify PTFE tubing with one Luer female fitting at the stated gauge and length, the unit integrates cleanly into analytical and general lab fluid-handling configurations without additional adapters when Luer compatibility is already in place.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA13 × 300 mm\u003c\/li\u003e\n\u003cli\u003eLength: 300 mm\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934015529292,"sku":"90613","price":39.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90613.png?v=1783731551"},{"product_id":"tub-ptfe-1xluer-f-ga14x","title":"TUB PTFE 1xLUER F GA14X**","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA14×** is a laboratory tubing component made from polytetrafluoroethylene (PTFE). It is configured with a single Luer female connector and carries the gauge designation GA14×**. PTFE is a fluoropolymer routinely selected for laboratory tubing where chemical compatibility with reagents and solvents is required. The product is supplied as 1 pc for individual use or integration into fluidic assemblies. This tubing item from manufacturer Hamilton supports connection tasks that rely on standard Luer interfaces in analytical and general laboratory practice. The female Luer end couples to matching male Luer fittings commonly found on syringes, adapters and instrument ports. Gauge GA14×** identifies the size class of the assembly within the PTFE tubing series. Country of origin is Romania. The component is suited to laboratory environments that need PTFE tubing with a defined Luer female termination for sample transfer, solvent lines or instrument coupling in routine fluid-handling workflows.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eGauge: GA14×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934074904908,"sku":"90664","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90664.png?v=1783730592"},{"product_id":"tub-ptfe-1xluer-f-ga14x300","title":"TUB PTFE 1XLUER F GA14X300","description":"\u003cp\u003ePTFE tubing with one Luer female connection in size GA14×300 is a gauge-specified laboratory hose piece for controlled liquid transfer. Constructed from polytetrafluoroethylene (PTFE), it pairs a GA14 tube profile with a 300 mm length and a single female Luer interface for secure coupling to matching Luer fittings. The assembly is suited to bench instruments, reagent lines and compact fluidic layouts that require a short PTFE segment ending in a female Luer. Offered as a single piece from manufacturer Hamilton, the tubing supports clear identification by the GA14×300 size code when selecting or replacing lines in existing systems. PTFE as the hose material and the defined Luer female connection address common laboratory needs for inert polymer tubing with standardised end geometry. Use this unit wherever GA14 PTFE tubing of 300 mm length with one Luer female fitting is specified for sampling, delivery or general laboratory fluid handling.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc(s)\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA14 × 300 mm\u003c\/li\u003e\n\u003cli\u003eLength: 300 mm\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934017921356,"sku":"90614","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90614.png?v=1783731560"},{"product_id":"tub-ptfe-1xluer-f-ga15x","title":"TUB PTFE 1xLUER F GA15X**","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA15×** is a laboratory tubing component made from polytetrafluoroethylene (PTFE). It is configured with a single Luer female connector and carries the gauge designation GA15×**. PTFE is a fluoropolymer routinely selected for laboratory tubing where chemical compatibility with reagents and solvents is required. The product is supplied as 1 pc for individual use or integration into fluidic assemblies. This tubing item from manufacturer Hamilton supports connection tasks that rely on standard Luer interfaces in analytical and general laboratory practice. The female Luer end couples to matching male Luer fittings commonly found on syringes, adapters and instrument ports. Gauge GA15×** identifies the size class of the assembly within the PTFE tubing series. Country of origin is Romania. The component is suited to laboratory environments that need PTFE tubing with a defined Luer female termination for sample transfer, solvent lines or instrument coupling in routine fluid-handling workflows.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eGauge: GA15×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934076707148,"sku":"90665","price":49.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90665.png?v=1783730601"},{"product_id":"tub-ptfe-1xluer-f-ga15x300","title":"TUB PTFE 1xLUER F GA15X300","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA15×300 is a laboratory fluid-transfer tube made from polytetrafluoroethylene (PTFE) and finished with a single female Luer connection in the GA15×300 format. PTFE is widely selected in analytical and preparative workflows for its chemical inertness and smooth internal surface, supporting reliable handling of aqueous and organic media when a compact Luer interface is required. The GA15×300 designation defines the gauge and length configuration of this ready-to-use tubing piece, simplifying integration into syringes, manifolds, or instrument lines that accept standard Luer fittings. Supplied as a single piece, the tube suits method development, instrument setup, and routine sample or reagent transfer where a defined PTFE path is preferred. This configuration comes from manufacturer Hamilton and fits typical laboratory tubing assortments used beside PP, PVC, PE, silicone, and rubber hose options. Categories covering PTFE tubing underline its role as a dedicated fluoropolymer line for bench and system connections. Clear identification of material, Luer style, and GA15×300 size helps laboratories match the correct spare or replacement tube without ambiguity.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE laboratory tubing\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA15×300\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934019592524,"sku":"90615","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90615.png?v=1783731569"},{"product_id":"tub-ptfe-1xluer-f-ga16x","title":"TUB PTFE 1xLUER F GA16X**","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA16×** is a laboratory tubing component made from polytetrafluoroethylene (PTFE). It is configured with a single Luer female connector and carries the gauge designation GA16×**. PTFE is a fluoropolymer routinely selected for laboratory tubing where chemical compatibility with reagents and solvents is required. The product is supplied as 1 pc for individual use or integration into fluidic assemblies. This tubing item from manufacturer Hamilton supports connection tasks that rely on standard Luer interfaces in analytical and general laboratory practice. The female Luer end couples to matching male Luer fittings commonly found on syringes, adapters and instrument ports. Gauge GA16×** identifies the size class of the assembly within the PTFE tubing series. Country of origin is Romania. The component is suited to laboratory environments that need PTFE tubing with a defined Luer female termination for sample transfer, solvent lines or instrument coupling in routine fluid-handling workflows.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eGauge: GA16×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934082834764,"sku":"90666","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90666.png?v=1783730609"},{"product_id":"tub-ptfe-1xluer-f-ga16x300","title":"TUB PTFE 1xLUER F GA16X300","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA16×300 is a fluoropolymer laboratory tube manufactured from polytetrafluoroethylene (PTFE) and equipped with one female Luer connector in the GA16×300 size. PTFE tubing is a standard choice for chemically demanding fluid paths in research and quality-control laboratories, offering a stable polymer wall for aqueous buffers, solvents, and other media when paired with Luer-compatible hardware. The GA16×300 format specifies the gauge and length of this single-ended Luer piece, supporting straightforward connection to syringes, valves, or instrument ports that use female Luer geometry. Packed as one piece, it is practical for instrument maintenance, method setup, and dedicated transfer lines where a defined PTFE segment is needed. The item is available from manufacturer Hamilton within the broader laboratory hose and tubing range that also includes PP, PVC, PE, silicone, and rubber options. Clear labelling of PTFE material, single Luer female termination, and GA16×300 dimensions helps purchasing and lab staff select the matching tube for existing assemblies. Use it wherever a compact PTFE Luer line is specified for bench or system fluid handling.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc(s)\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE laboratory tubing\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA16×300\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934022738252,"sku":"90616","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90616.png?v=1783731577"},{"product_id":"tub-ptfe-1xluer-f-ga17x","title":"TUB PTFE 1xLUER F GA17X**","description":"\u003cp\u003ePTFE tubing with 1× Luer female connection, GA17×**, is a laboratory fluid-line component made from polytetrafluoroethylene (PTFE). PTFE tubing is selected in analytical and preparative setups where chemical resistance and a clean, non-wetting polymer surface support transfer of solvents, reagents, and aqueous media. The single Luer female interface allows direct coupling to matching Luer fittings, syringes, and instrument ports used in liquid handling, sample introduction, and general benchtop fluid routing. Gauge-related designation GA17×** identifies the connector geometry so the line can be matched to the intended Luer pathway and flow arrangement. Offered as 1 pc, the format suits building or replacing individual transfer segments rather than bulk hose stock. This PTFE tubing item from manufacturer Hamilton belongs to the laboratory tubing and PTFE hose category and is intended for configuration of custom fluid paths on compatible systems. Material identity, Luer female termination, and the GA17×** specification define the product for catalogue selection and instrument matching. Handle and install according to standard laboratory practice for polymer fluidic accessories.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eSpecification: GA17×**\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934084047180,"sku":"90667","price":47.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90667.png?v=1783730617"},{"product_id":"tub-ptfe-1xluer-f-ga17x300","title":"TUB PTFE 1xLUER F GA17X300","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA17×300 is a laboratory tubing component manufactured from polytetrafluoroethylene (PTFE) and fitted with a single Luer female connector. The GA17×300 format defines the gauge and length configuration of this PTFE line for fluid transfer and interconnection in analytical, chemical and life-science laboratory setups. PTFE is selected where chemically resistant, inert polymer flow paths are required for reagents and samples. Supplied as 1 pc(s), the tubing integrates readily into bench-top fluidic assemblies, syringe systems or instrument interfaces that accept Luer female connections. The Luer female end enables secure mating with matching Luer fittings widely used in laboratory fluid handling. This PTFE tubing item from manufacturer Hamilton belongs to the PTFE hose family and supports routine connection tasks in research and quality-control environments. Its polymer construction suits flexible, chemically stable lines where dedicated Luer-compatible PTFE tubing is needed. The single-piece pack simplifies stocking and replacement of GA17×300 PTFE lines in professional laboratory workflows without multi-unit bulk packaging.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc(s)\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA17×300\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eEAN: 4033378255525\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934025883980,"sku":"90617_70","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90617_70.png?v=1783731585"},{"product_id":"tub-ptfe-1xluer-f-ga19x","title":"TUB PTFE 1xLUER F GA19X**","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA19×** is a laboratory tubing component made from polytetrafluoroethylene (PTFE). It carries a single female Luer connection and is specified in the GA19×** gauge configuration for matching to compatible laboratory fittings. The product is supplied as 1 pc, supporting individual replacement, method setup, or assembly work in fluid-handling systems. PTFE tubing of this style is used to link instruments, syringes, and manifolds that rely on Luer interfaces. The material designation polytetrafluoroethylene (PTFE) identifies the polymer of the tubing wall, while the GA19×** gauge and one-times Luer female end define the mechanical interface. Available from manufacturer Hamilton, the piece suits laboratory workflows that need discrete PTFE lines with standardised Luer connectivity rather than bulk hose. Associated categories place the item among PTFE laboratory tubing used for fluid transfer. Each unit is offered as a single piece for simple stocking and traceability. Clear identification of the female Luer end and the GA19×** size helps staff select the correct counterpart fittings and ports in analytical and general laboratory environments.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eGauge: GA19×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934094500172,"sku":"90669","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90669.png?v=1783730635"},{"product_id":"tub-ptfe-1xluer-f-ga19x300","title":"TUB PTFE 1xLUER F GA19X300","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA19×300 is a laboratory tubing component produced from polytetrafluoroethylene (PTFE) and finished with a single Luer female connector. The GA19×300 format identifies the gauge and length configuration of this PTFE line for fluid transfer and interconnection in analytical, chemical and life-science laboratory applications. PTFE is chosen for chemically resistant, inert polymer flow paths when handling reagents and samples. Delivered as 1 pc, the tubing integrates into bench-top fluidic assemblies, syringe systems or instrument interfaces designed for Luer female connections. The Luer female end allows secure mating with matching Luer fittings used throughout laboratory fluid handling. This PTFE tubing item from manufacturer Hamilton sits within the PTFE hose product family and supports routine laboratory connection tasks. Its polymer construction is appropriate for flexible, chemically stable lines where Luer-compatible PTFE tubing is required. The single-piece unit quantity simplifies stocking and replacement of GA19×300 PTFE lines in research and quality-control workflows that depend on dedicated laboratory tubing components.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA19×300\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934032535884,"sku":"90619","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/70-066.png?v=1783415198"},{"product_id":"tub-ptfe-1xluer-f-ga20x","title":"TUB PTFE 1xLUER F GA20X**","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA20×** is a laboratory tubing component made from polytetrafluoroethylene (PTFE). It carries a single female Luer connection and is specified in the GA20×** gauge configuration for matching to compatible laboratory fittings. The product is supplied as 1 pc, supporting individual replacement, method setup, or assembly work in fluid-handling systems. PTFE tubing of this style is used to link instruments, syringes, and manifolds that rely on Luer interfaces. The material designation polytetrafluoroethylene (PTFE) identifies the polymer of the tubing wall, while the GA20×** gauge and one-times Luer female end define the mechanical interface. Available from manufacturer Hamilton, the piece suits laboratory workflows that need discrete PTFE lines with standardised Luer connectivity rather than bulk hose. Associated categories place the item among PTFE laboratory tubing used for fluid transfer. Each unit is offered as a single piece for simple stocking and traceability. Clear identification of the female Luer end and the GA20×** size helps staff select the correct counterpart fittings and ports in analytical and general laboratory environments.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eGauge: GA20×**\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934095384908,"sku":"90670","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90670.png?v=1783730642"},{"product_id":"tub-ptfe-1xluer-f-ga20x300","title":"TUB PTFE 1xLUER F GA20X300","description":"\u003cp\u003ePTFE tubing, 1× Luer female, GA20×300 is a laboratory tubing assembly made from polytetrafluoroethylene (PTFE) and terminated with a single Luer female connector. It is intended for fluid-handling setups in which an inert fluoropolymer line and a defined Luer interface are required. The GA20×300 designation identifies the gauge and length configuration of the tubing, supporting compatibility with matching Luer male fittings on syringes, valves and instrument ports. Supplied as one piece, the unit is suitable for individual installation or replacement within analytical, preparative and general laboratory systems. Material selection is PTFE, placing the product in the PTFE tubing category used alongside other laboratory hoses. This tubing from manufacturer Hamilton originates from Romania and is offered for professional laboratory use where PTFE contact surfaces and a female Luer termination are specified. Typical contexts include solvent and reagent transfer lines, temporary connections and instrument interfaces that rely on standard Luer geometry. The compact single-piece pack supports straightforward stock keeping for method development, routine workflows and system maintenance without multi-unit packaging.\u003c\/p\u003e\n\u003c!-- lx-pdp-inline --\u003e\n\u003cp\u003eThis article is part of \u003ca href=\"\/en-fr\/collections\/hose-connectors-adapters-and-fittings\"\u003eHose connectors, adapters \u0026amp; fittings\u003c\/a\u003e, in \u003ca href=\"\/en-fr\/collections\/tubing-hoses-and-fittings\"\u003eTubing, hoses \u0026amp; fittings\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack size: 1 pc\u003c\/li\u003e\n\u003cli\u003eMaterial: Polytetrafluoroethylene (PTFE)\u003c\/li\u003e\n\u003cli\u003eConnection: 1× Luer female\u003c\/li\u003e\n\u003cli\u003eSize: GA20×300\u003c\/li\u003e\n\u003cli\u003eProduct type: PTFE tubing\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Romania\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hamilton","offers":[{"title":"Default Title","offer_id":57934036697420,"sku":"90620","price":52.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/idl-90620.png?v=1783731609"}],"url":"https:\/\/www.luminixhealth.com\/en-fr\/collections\/hamilton.oembed","provider":"Luminix Health","version":"1.0","type":"link"}