{"product_id":"protegra-of-3000-reverse-osmosis-3000-lh","title":"Protegra OF 3000 - Reverse Osmosis, 3000 l\/h","description":"\u003cstrong\u003eThe Protegra OF 3000 reverse osmosis\u003c\/strong\u003e \u003cstrong\u003esystem\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e The Protegra OF 3000 cost-effectively produces larger quantities of deionized water. Equipped with high-quality components and an intelligent control system, the system must be connected to a tank with level monitoring to control production. The system provides high purity water with the advantage of continuous operation. Production runs automatically in two operating modes.\u003cbr\u003e \u003cbr\u003e Product features and benefits:\u003cbr\u003e - With energetically economical and high performance reverse osmosis membranes, a high output of pure water is achieved with a high salt retention rate at the same time. This minimizes the energy requirements and reduces water loss.\u003cbr\u003e - Before each standby an automatic system flush is performed to reduce the ion concentration at the membranes which increases the life and reliability of the system.\u003cbr\u003e - A microprocessor controller monitors the pure water quality and the status of the system. Exceeded values, such as expired maintenance intervals and water quality are displayed as alarm messages.\u003cbr\u003e - The limit values for conductivity and flow rate of the pure water can be set individually.\u003cbr\u003e - The system is structured clearly and can be operated from all sides for service purposes.\u003cbr\u003e - The system is low-maintenance.\u003cbr\u003e \u003cbr\u003e Pure water production: Reverse Osmosis\u003cbr\u003e - Feed water solenoid valve\u003cbr\u003e - Pressure regulator\u003cbr\u003e - Conductivity sensor for feed water (cell constant c=1.0)\u003cbr\u003e - filter housing includes four  20'' filter cartridges, 5 µm\u003cbr\u003e - Pressure switch for feed water\u003cbr\u003e - Stainless steel pump (1.4401\/1.4301)\u003cbr\u003e - Pressure sensor for operating pressure\u003cbr\u003e - 3 Reverse osmosis modules 8'' from polyamide\/polysulfone with GFK cylinders and end caps\u003cbr\u003e - Regulator for concentrate flow to drain and return flow\u003cbr\u003e - Three flow sensors for pure water and concentrate\u003cbr\u003e - Conductivity sensor for permeate (cell constant c=0.2)\u003cbr\u003e - Quality dependent permeate distribution valve\u003cbr\u003e \u003cbr\u003e Microprocessor Control:\u003cbr\u003e - Located on the front of the system\u003cbr\u003e - System status\u003cbr\u003e - Conductivity of feed water and permeate\u003cbr\u003e - Volumetric flow of pure water and concentrate\u003cbr\u003e - Reminder service and filter change\u003cbr\u003e - Alarm indicator for: low flow feed water, out of range conductivity, flow rates and tank volume\u003cbr\u003e - Tank level indication in Percent, three options for unit to switch ON or OFF. Pump protection against running dry for pure water\u003cbr\u003e - Connection for common alarm to BMS with adjustable time interval (optional single alarm possible)\u003cbr\u003e - Time schedule for concentrate to drain and module rinsing\u003cbr\u003e - Multilingual (German, English)\u003cbr\u003e - RS232 interface, with optional software for further data processing\u003cbr\u003e \u003cbr\u003e Delivered with:\u003cbr\u003e - Operating manual\u003cbr\u003e - Electrical diagram\u003cbr\u003e - CE certificate\u003cbr\u003e \u003cbr\u003e Connection possibilities:\u003cbr\u003e - Potential free contact for common alarm\u003cbr\u003e - Booster pump start\/stop function with dry-run protection and interval operation\u003cbr\u003e - Feed water hardness monitor. In the event of hardness breaking through the unit switches off to prevent blockage of the RO membranes\u003cbr\u003e \u003cbr\u003e Optional:\u003cbr\u003e - Reminder for service intervals (potential free contact)\u003cbr\u003e - UV-disinfection kit with interval operation\u003cbr\u003e - Timer switch for use in connection with pressure booster pump\u003cbr\u003e \u003cbr\u003e Feed water specifications:\u003cbr\u003e Flow rate: 4000 - 6000 l\/h\u003cbr\u003e Pressure: 2 - 6 bar\u003cbr\u003e Conductivity: \u0026lt; 2000 µS\/cm\u003cbr\u003e TDS: 1000 mg\/l\u003cbr\u003e CO2: \u0026lt; 20 mg\/l\u003cbr\u003e Total Iron: \u0026lt; 0.1 mg\/l\u003cbr\u003e Free Chlorine: \u0026lt; 0.1 mg\/l\u003cbr\u003e Temperature: 5 - 30°C\u003cbr\u003e Softened or hardness stabilized\u003cbr\u003e \u003cbr\u003e Performance specifications:\u003cbr\u003e Delivery flow rate at 15°C: 3000 l\/h\u003cbr\u003e Salt retention: 98 %\u003cbr\u003e Recovery rate up to: 75 %\u003cbr\u003e TOC: \u0026lt; 30 ppb\u003cbr\u003e Bacteria reduction: \u0026gt; 99 %\u003cbr\u003e \u003cbr\u003e Technical data:\u003cbr\u003e Operating pressure: max. 14 bar\u003cbr\u003e Mains input: 3 x 400 V, 50 Hz\u003cbr\u003e Power consumption: 5.5 kW\/h\u003cbr\u003e Ambient temperature: 5 - 35°C\u003cbr\u003e Fuse: 16 A\u003cbr\u003e \u003cbr\u003e Feed water connection:\u003cbr\u003e R 1-1\/2'' male BSP\u003cbr\u003e Permeate water connection:\u003cbr\u003e R 1-1\/2'' male BSP\u003cbr\u003e RO permeate, drain connection:\u003cbr\u003e R 1-1\/2'' male BSP\u003cbr\u003e Pure water back-pressure: 1 bar\u003cbr\u003e \u003cbr\u003e Dimensions and Weight:\u003cbr\u003e Height: 1900 mm\u003cbr\u003e Width: 3900 mm\u003cbr\u003e Depth: 960 mm\u003cbr\u003e Weight: 345 kg\u003cbr\u003e \u003cbr\u003e Please note:\u003cbr\u003e The unit accepts a feed water salt content of 1000 mg\/l, equivalent a conductivity of 2000 µS\/cm at 15°C.\u003cbr\u003e The feed water specifications are guidelines.","brand":"IDL","offers":[{"title":"1 piece","offer_id":56337261723980,"sku":"W3T198160","price":42864.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/167-Protegra_20CS_20RO_203000.png?v=1766914844","url":"https:\/\/www.luminixhealth.com\/en-nl\/products\/protegra-of-3000-reverse-osmosis-3000-lh","provider":"Luminix Health","version":"1.0","type":"link"}