Acétate d'éthyle, ROTISOLV®, min. 99,9 %, qualité LC-MS, 1 l, verre

Catalog nr. AE69.1
Carl Roth

Volume: 1 liter
Waardepakketten: 1 stuk
Prix:
Prix réduit€75,80
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

L'acétate d'éthyle ROTISOLV® est un solvant de haute pureté de qualité LC-MS, avec une teneur minimale de 99,9 %, destiné aux flux de travail exigeants en chromatographie en phase liquide couplée à la spectrométrie de masse. Identifié par le numéro CAS 141-78-6 et la formule empirique C₄H₈O₂, il présente une masse molaire de 88,11 g/mol et une densité de 0,9003 g/cm³. Son point d'ébullition est de 77,1 °C et son point d'éclair est de −4 °C, ce qui permet une manipulation contrôlée dans les laboratoires d'analyse. Le numéro CE 205-500-4 correspond à l'entrée répertoriée dans l'inventaire européen pour cette substance. Les solvants LC-MS ROTISOLV® sont choisis lorsque les impuretés résiduelles doivent être strictement contrôlées afin de protéger la sensibilité de la détection et d'assurer la reproductibilité du comportement de rétention. Les données physiques et le conditionnement favorisent une utilisation courante dans les environnements de recherche, de contrôle qualité et de développement de méthodes axés sur les performances LC-MS.

Cet article appartient à la catégorie Solvants de qualité HPLC & LC-MS, dans Solvants. Voir aussi Solvants pour analyse (p.a.).

Caractéristiques principales

  • Teneur (GC) : ≥99,9 %
  • Couleur (APHA) : ≤5
  • Eau (KF) : ≤0,05 %
  • Acide libre (en CH3COOH) : ≤0,003 %
  • Alcali libre (en NH3) : ≤0,0005 %
  • Matières non volatiles : ≤0,0005 %
  • 275 nm : ≥98 %
  • 260 nm : ≥75 %
  • Aluminium (Al) : ≤0,05 ppm
  • Calcium (Ca) : ≤0,05 ppm
  • Numéro CAS : 141-78-6
  • Conditionnements : 1 l, 2,5 l
  • N° CE : 205-500-4
  • Pureté : min. 99,9 %
  • Qualité : Qualité LC-MS ROTISOLV®
  • Masse molaire : 88,11 g/mol
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS07 Dangereux

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336EU May cause drowsiness or dizziness
H066 Repeated exposure may cause skin dryness or cracking

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 P243 – No description available
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Acétate d'éthyle, ROTISOLV®, min. 99,9 %, qualité LC-MS, 1 l, verre

What is this article?

Acétate d'éthyle, ROTISOLV®, min. 99,9 %, qualité LC-MS, 1 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Produits chimiques.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?