Nitric acid , ROTIPURAN® Ultra, 69 %, 250 ml, plastique (FEP)

Catalog nr. HN60.1
Carl Roth

Volume: 250 ml
Quantité: 1 pièce
Prix:
Prix réduit€514,95
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Nitric acid, ROTIPURAN® Ultra, 69 % est un acide minéral de haute pureté avec la formule empirique HNO₃, le numéro CAS 7697-37-2 et le numéro EG 231-714-2. La masse molaire est de 63.01 g/mol, la densité varie de 1.39 à 1.41 g/cm³ et le point d'ébullition se situe entre 120 et 121 °C ; le numéro UN 2031 s'applique à la classification pour le transport. La digestion acide, la préparation des échantillons et l'ajustement de matrice bénéficient de la qualité Ultra définie lorsque de faibles niveaux de blanc sont importants. Le nitric acid ROTIPURAN® Ultra du fabricant Carl ROTH est destiné aux laboratoires qui exigent une concentration constante et un emballage compatible avec les milieux corrosifs. Des données physiques claires aident au développement de méthodes et à la documentation. Choisissez ce format de flacon FEP pour une distribution contrôlée et le stockage de nitric acid concentré dans des flux de travail instrumentaux de routine et spécialisés.

Cet article fait partie de Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques

  • Dosage (w/w): 67-69 %
  • Aluminium (Al): ≤20 ppt
  • Antimony (Sb): ≤10 ppt
  • Arsenic (As): ≤20 ppt
  • Barium (Ba): ≤10 ppt
  • Beryllium (Be): ≤10 ppt
  • Lead (Pb): ≤10 ppt
  • Boron (B): ≤10 ppt
  • Cadmium (Cd): ≤10 ppt
  • Cesium (Cs): ≤10 ppt
  • Numéro CAS: 7697-37-2
  • Conditionnements: 250 ml, 500 ml, 1 l, 2 l
  • N° CE: 231-714-2
  • Formule brute: HNO₃
  • Masse molaire: 63.01 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS03, oxidisingGHS05, corrosiveGHS06, toxicDanger

Hazard Statements (H-Phrases)

H272Peut aggraver un incendie; comburant. H290Peut être corrosif pour les métaux. H314Provoque de graves brûlures de la peau et de graves lésions des yeux. H331Toxique par inhalation. EUH071Corrosif pour les voies respiratoires.

Precautionary Statements (P-Phrases)

P220Tenir à l'écart des vêtements et d'autres matières combustibles. P260Ne pas respirer les poussières/fumées/gaz/brouillards/vapeurs/aérosols. P280Porter des gants de protection/des vêtements de protection/un équipement de protection des yeux/du visage. P303+P361+P353EN CAS DE CONTACT AVEC LA PEAU (ou les cheveux): Enlever immédiatement tous les vêtements contaminés. Rincer la peau à l'eau [ou se doucher]. P305+P351+P338EN CAS DE CONTACT AVEC LES YEUX: Rincer avec précaution à l'eau pendant plusieurs minutes. Enlever les lentilles de contact si la victime en porte et si elles peuvent être facilement enlevées. Continuer à rincer. P310Appeler immédiatement un CENTRE ANTIPOISON/un médecin.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Nitric acid , ROTIPURAN® Ultra, 69 %, 250 ml, plastique (FEP)

What is this article?

Nitric acid , ROTIPURAN® Ultra, 69 %, 250 ml, plastique (FEP) is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité analytique (p.a.), inside Solvants, in Produits chimiques.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?