Solution de PCB ROTI®Star, 8 PCB 1 µg/ml dans du n-hexane, 5 ml, ampoule en verre

Catalog nr. 1YY1.1
Carl Roth

Volume: 5 ml
Waardepakketten: 1 stuk
Prix:
Prix réduit€263,40
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

La solution de PCB ROTI®Star est un mélange d'étalonnage à plusieurs congénères fournissant huit polychlorobiphényles à 1 µg/ml dans du n-hexane. Les congénères inclus sont PCB 28, PCB 52, PCB 101, PCB 118, PCB 138, PCB 153, PCB 180 et PCB 194, adaptés à l'analyse environnementale et à la quantification par chromatographie en phase gazeuse. Le produit est conditionné en ampoule en verre de 5 ml et présente une masse volumique de 0,66 g/cm³, un point d'éclair de −22 °C et une plage d'ébullition de 68 à 69 °C. Disponible auprès du fabricant Carl ROTH, cet étalon à concentration plus faible permet les étalonnages au niveau opérationnel, la validation de méthodes et le contrôle qualité continu sans étapes de dilution intermédiaires dans de nombreux protocoles de CG. La matrice n-hexane est largement compatible avec les protocoles de préparation d'échantillons courants utilisés pour les extraits de sol, d'eau et de biotes. L'identification claire des huit PCB cibles simplifie la documentation pour les laboratoires accrédités surveillant les polluants organiques persistants. Le format ampoule aide à préserver l'intégrité de la solution jusqu'au moment de son utilisation dans les flux de travail chromatographiques.

Cet article fait partie de Solvants qualité HPLC & LC-MS, dans Solvants. Voir aussi Solvants pour analyse (p.a.).

Caractéristiques principales

  • PCB 28 : 1 µg/ml
  • PCB 52 : 1 µg/ml
  • PCB 101 : 1 µg/ml
  • PCB 118 : 1 µg/ml
  • PCB 138 : 1 µg/ml
  • PCB 153 : 1 µg/ml
  • PCB 180 : 1 µg/ml
  • PCB 194 : 1 µg/ml
  • Conditionnement : Ampoule en verre de 5 ml
  • Masse volumique : 0,66 g/cm³
  • Point d'ébullition : 68 à 69 °C
  • Concentration : 1 µg/ml
  • Solvant : n-hexane
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS07GHS08GHS09 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H304 May be fatal if swallowed and enters airways
H315 Causes skin irritation
H336 May cause drowsiness or dizziness
H361f H361f – No description available
H373 May cause damage to organs through prolonged or repeated exposure
H411 Toxic to aquatic life with long lasting effects

Precautionary Statements (P-Phrases)

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Solution de PCB ROTI®Star, 8 PCB 1 µg/ml dans du n-hexane, 5 ml, ampoule en verre

What is this article?

Solution de PCB ROTI®Star, 8 PCB 1 µg/ml dans du n-hexane, 5 ml, ampoule en verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Produits chimiques de laboratoire et industriels.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?