Trichloromethane/Chloroform, ROTISOLV®, min. 99.8 %, Pestilyse®, 2.5 l, verre

Catalog nr. T901.1
Carl Roth

Volume: 2,5 liter
Quantité: 1 pièce
Prix:
Prix réduit€110,20
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Trichloromethane, également connu sous le nom de chloroform, est proposé ici comme solvant ROTISOLV® Pestilyse® avec une pureté minimale de 99.8 % et une stabilisation avec ethanol. La substance est définie par le numéro CAS 67-66-3 et la formule empirique CHCl₃, une masse molaire de 119.38 g/mol et une densité de 1.48 g/cm³. Son point d'ébullition est de 61 °C, ce qui favorise l'usage comme solvant chloré dense en chromatographie en phase gazeuse et dans les travaux analytiques associés. Ce conditionnement fournit 2.5 l dans du verre pour l'approvisionnement courant de laboratoire. Les données physiques et réglementaires du fabricant Carl ROTH comprennent le numéro EG 200-663-8 et le numéro UN 1888, conformément à la documentation standard de chloroform. En tant que qualité ROTISOLV® Pestilyse®, le produit est destiné aux applications de solvant GC où une teneur élevée et une stabilisation contrôlée sont requises. Les laboratoires peuvent s'appuyer sur la composition et la densité indiquées pour le développement de méthodes, les étapes d'extraction et la manipulation d'échantillons chromatographiques qui exigent du trichloromethane de qualité définie.

Cet article fait partie de Solvants de qualité HPLC & LC-MS, dans Solvants. Voir aussi Solvants de qualité analytique (p.a.).

Caractéristiques

  • Dosage (GC): ≥99.8 %
  • Eau (KF): ≤0.01 %
  • Acidité: ≤0.0005 meq/g
  • Résidu d'évaporation: ≤0.0005 %
  • GC/ECD (signal individuel en tant que lindane): ≤5 ng/l
  • GC/PND (signal individuel en tant que ethylparathion): ≤10 ng/l
  • Numéro CAS: 67-66-3
  • Conditionnement: 2.5 l verre
  • N° CE: 200-663-8
  • Pureté: min. 99.8 %
  • Qualité: ROTISOLV® Pestilyse®, stabilisé avec ethanol
  • Masse molaire: 119.38 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS06GHS08 Danger

Hazard Statements (H-Phrases)

H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H331 Toxic if inhaled
H351 Suspected of causing cancer
H361d H361d – No description available
H372 Causes damage to organs through prolonged or repeated exposure

Precautionary Statements (P-Phrases)

P202 P202 – No description available
P260 P260 – No description available
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Trichloromethane/Chloroform, ROTISOLV®, min. 99.8 %, Pestilyse®, 2.5 l, verre

What is this article?

Trichloromethane/Chloroform, ROTISOLV®, min. 99.8 %, Pestilyse®, 2.5 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité HPLC & LC-MS, inside Solvants, in Produits chimiques.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?