{"product_id":"protegra-cs-pro-ro-edi-250-reverse-osmosis-system-with-ionpure-edi-250-lh","title":"Protegra CS PRO RO EDI 250 - Reverse Osmosis system with Ionpure EDI, 250 l\/h","description":"\u003cstrong\u003eProtegra CS PRO RO EDI 250\u003c\/strong\u003e\u003cbr\u003e  Reverse Osmosis system with Ionpure EDI, 250 l\/h\u003cbr\u003e \u003cbr\u003e CONSISTENTLY HIGH WATER QUALITY\u003cbr\u003e The Protegra CS® Pro RO EDI system is a high-performance purification solution for deionised water applications. Featuring industry-leading reverse osmosis technology and a high-performance Ionpure® CEDI cell, the system maintains water quality at the required standard.\u003cbr\u003e The system is ideal for a range of laboratory and industrial applications with a typical water quality of \u0026gt; 0,07µS\/cm and flow rates up to 250 l\/h at 15°C.\u003cbr\u003e \u003cbr\u003e Product features and benefits:\u003cbr\u003e - Energy efficient and high performance reverse osmosis (RO) modules effectively achieve high inorganic retention and permeate production. This reduces energy demand and\u003cbr\u003e   minimizes water waste.\u003cbr\u003e - Electro-deionization removes the residual salt content from the water without exhausting itself.\u003cbr\u003e - Automatic rinsing of entire system before going into stand-by mode reduces build-up of ions in the RO membranes - increasing the lifespan.\u003cbr\u003e - Microprocessor control provides automatic operation with continuous monitoring of all important parameters\u003cbr\u003e - The limits for conductivity and flow rates of pure water can be set individually.\u003cbr\u003e - Removable front and side panels for easy service access\u003cbr\u003e - The system is low maintenance.\u003cbr\u003e \u003cbr\u003e Production of pure water: Reverse osmosis\u003cbr\u003e - Feed water solenoid valve\u003cbr\u003e - Pressure regulator\u003cbr\u003e - Conductivity sensor for feed water (cell constant C=0,1)\u003cbr\u003e - Filter with activated carbon\u003cbr\u003e - Pressure switch for feed water\u003cbr\u003e - Stainless steel pump (1.4401\/1.4301)\u003cbr\u003e - Pressure sensor for operating pressure\u003cbr\u003e - 2 Reverse osmosis modules made of polyamide\/polysulfone with pressure tubes made of stainless steel (1.4571) and end caps made of polypropylene (PP)\u003cbr\u003e - Regulator for concentrate flow to drain and return\u003cbr\u003e - Three flow sensors for pure water, concentrate and brine\u003cbr\u003e - Conductivity sensor for permeate (cell constant C=0,2)\u003cbr\u003e - Quality-dependent permeate distribution valve\u003cbr\u003e \u003cbr\u003e Continuous Electrodeionization (CEDI):\u003cbr\u003e - Ionpure CEDI module for up to 250 l\/h\u003cbr\u003e - Conductivity sensor for pure water, temperature compensated (cell constant C=0,1)\u003cbr\u003e - Temperature sensor\u003cbr\u003e \u003cbr\u003e New 7'' touch-panel control:\u003cbr\u003e - Mounted on the front of the system\u003cbr\u003e - System status displayed\u003cbr\u003e - Conductivity of feed water, permeate and pure water\u003cbr\u003e - Volume flow rate of pure water, concentrate and brine\u003cbr\u003e - Alarm indicator\u003cbr\u003e - Timeline for concentrate discharge to drain and module rinsing\u003cbr\u003e - Multilingual (German, English)\u003cbr\u003e - USB interface for data transfer\u003cbr\u003e - microSD-Port (Data recording and firmware updates)\u003cbr\u003e \u003cbr\u003e Supplied with:\u003cbr\u003e - Operating manual\u003cbr\u003e - Electrical circuit diagram\u003cbr\u003e - Active carbon fine filter cartridge\u003cbr\u003e - key for filter cartridge\u003cbr\u003e - Set of 4 hoses (3m ea), 3\/4''\u003cbr\u003e - Power cable NOT included\u003cbr\u003e \u003cbr\u003e Optional:\u003cbr\u003e - Water Guard R3\/4'' f\/m (W2T828181)\u003cbr\u003e - LED-Signal light tower (Red-yellow-green) (W3T307039)\u003cbr\u003e - Modbus TCP gateway for continuous data transfer to a BMS (Building management system) or PC\/ laptop (W3T570885)\u003cbr\u003e - CO2 Membrane degassing system (W3T262426)\u003cbr\u003e - Complete DQ\/IQ\/OQ\/PQ documentation and validation of the system on site available upon request.\u003cbr\u003e \u003cbr\u003e Feed water specifications:\u003cbr\u003e Softened or hardness stabilized\u003cbr\u003e \u003cbr\u003e Flow rate: 385 - 520 l\/h\u003cbr\u003e Pressure: 2,5 - 6,0 bar\u003cbr\u003e Temperature: 5 - 30°C\u003cbr\u003e Conductivity: \u0026lt; 1400 µS\/cm\u003cbr\u003e Colloid index (SDI): \u0026lt; 3\u003cbr\u003e TDS: 700 mg\/l\u003cbr\u003e CO2: \u0026lt; 10 mg\/l\u003cbr\u003e SiO2: \u0026lt; 10 mg\/l\u003cbr\u003e TOC: \u0026lt; 1500ppb\u003cbr\u003e pH: 3-9\u003cbr\u003e Total iron: \u0026lt; 0,1 mg\/l\u003cbr\u003e Free chlorine: \u0026lt; 0,1 mg\/l\u003cbr\u003e Manganese: \u0026lt;0,05 mg\/l\u003cbr\u003e \u003cbr\u003e Performance specifications:\u003cbr\u003e Flow rate at 15 °C: 250 l\/h\u003cbr\u003e Conductivity: \u0026lt; 0,1 µS\/ml\u003cbr\u003e Typical conductivity: \u0026lt; 0,07 µS\/cm\u003cbr\u003e Recovery rate up to: 50-80%\u003cbr\u003e \u003cbr\u003e Technical data:\u003cbr\u003e Mains input: 400V 3\/N\/PE 50\/60 Hz\u003cbr\u003e Power consumption: 1,2 kW\/h\u003cbr\u003e Ambient temperature: 1 - 30°C\u003cbr\u003e Humidity: no condensation\u003cbr\u003e Fuse protection: max. 16 A\u003cbr\u003e Residual current device\u003cbr\u003e (RCD formerly FI): Type B, 30mA, short-time delayed\u003cbr\u003e Sound pressure level: max. 64db(a)\u003cbr\u003e \u003cbr\u003e The power connection is made via supply terminals inside the Protegra and must be provided by the customer.\u003cbr\u003e \u003cbr\u003e Hydraulic ports:\u003cbr\u003e Feed water: G3\/4'' MPT\u003cbr\u003e Product water: G3\/4'' MPT\u003cbr\u003e Concentrate: G3\/4'' MPT\u003cbr\u003e Brine: G3\/4'' MPT\u003cbr\u003e \u003cbr\u003e Dimensions and weight:\u003cbr\u003e Height: 1795 mm (on wheels)\u003cbr\u003e Height w\/ optional lamp: 1960 mm\u003cbr\u003e Width:   650 mm\u003cbr\u003e Depth:   545 mm\u003cbr\u003e Weight: approx. 180 kg\u003cbr\u003e \u003cbr\u003e Please note:\u003cbr\u003e The unit accepts a feed water salt concentration of 700 mg\/l, equivalent to a conductivity of 1400 µS\/cm at 15°C.\u003cbr\u003e The feed water specifications are guidelines. The pure water specifications can only be guaranteed if a feed water analysis including levels of silicate and CO2 of the installation\u003cbr\u003e site and all other relevant parameters have been analyzed.","brand":"IDL","offers":[{"title":"1 piece","offer_id":56337261494604,"sku":"W3T553432","price":27317.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/4827\/7068\/files\/167-PK7C0014_ampel_b_e97c671b-c3df-4d77-a735-956b90863767.png?v=1766914808","url":"https:\/\/www.luminixhealth.com\/fr-fr\/products\/protegra-cs-pro-ro-edi-250-reverse-osmosis-system-with-ionpure-edi-250-lh","provider":"Luminix Health","version":"1.0","type":"link"}