Beschreibung
Puridest PD 4 DG water still, 2.2 µS/cm / 1.6 µS/cm, 4 l/h, incl. power cord with plug (IEC 60309, 5-pin, CEE, red, 16 A)
Fully automatic device for creating ultra-pure distilled water.
- Energy saving thanks to distilling heated cooling water
- Water saving thanks to automatic switch-off function preventing unnecessary water consumption
- Solenoid valve for controlling the water supply
- Electronic level monitoring throughout the entire distillation process
- Water level check in the evaporator with automatic power disconnection if the water level is too low
- Electronic contamination monitoring system triggers an automatic water change for rinsing and cleaning the evaporator
- Condensers with droplet-repellent steam flow
- Condenser sterilisation via steaming
- Visible working process thanks to anti-fogging, shatterproof and easily removable front panel
- Distillate drawing on the right-hand side of the device via hose connection
- CO2 degassing opening on the condenser
- Suitable for wall mounting and tabletop use
Please pay attention to supply voltages!
Bi-still with no reservoir.
Technical Information
| Type | PD 4 DG |
| Production output | 4 l/h |
| Heating output | 5800 W |
| Conductivity mono destillate at 25 °C | 2.2 µS/cm |
| Conductivity bi destillate at 25 °C | 1.6 µS/cm |
| Width | 650 mm |
| Depth | 365 mm |
| Height | 390 mm |
| Max. operating pressure | 7 bar |
| Connection | water cooling intake: 1/2″ water cooling drain: 1/2″ |
| Water consumption | 2.4 l/min |
| Intake power | 5800 W |
| Mains connection | 400 V, 3/N/PE, 50/60 Hz |
| Power cord | with plug (IEC 60309, 5-pin, CEE, red, 16 A) |