Beschreibung
(Ultra)pure water system, OmniaTap UV/UF 20 l/h, with 10 l tank, incl. OmniaTap ultrapure water system, 10 l storage tank, pretreatment and ultrapure water cartridge, UV lamp, ultrafiltration module, sterile filter, 3 x PE hoses and R 3/4 water connection adapter. Contains LITHIUM-ION CELLS. Not subject to labelling according to ADR SV188., UN-Nr. 3091
Treatment system for producing both pure and ultrapure water. Connectible directly to the mains water supply. With the flexible dispenser, ultrapure water of the category ASTM type I is extracted. The water is drawn at the touch of a button using the dispenser's digital control. A tank with recirculation keeps the quality permanently at ASTM Type II. These OmniaTap devices are optionally available with an integrated 10 l pure water storage tank or without a storage tank. Accessories for the OmniaTap devices without a storage tank include separately connectable 30 l or 60 l storage tanks. An optionally available pump station can be used to supply downstream devices, such as autoclaves or dishwashers, directly with pure water (ASTM Type II) from the pure water storage tank. Note: the 30 l or 60 l storage tank is not included in the scope of delivery and must be ordered separately for devices without a storage tank as an accessory required for operation. This appliance series cannot be operated without a connected pure water storage tank.
- TapWater set - direct connection to drinking water
- OptiFill dispenser as standard, one-handed operation
- Dispenser has a swivel range of up to 170°
- Two language settings available: DE, EN
- Ultrapure water withdrawal at the touch of a button
- Space-saving mounting on a laboratory bench or optionally on a wall
- Optionally available with integrated 10 l storage tank or without storage tank; separate 30 l or 60 l storage tanks are available as accessories
- Tank volume display in percent
- Simple and cost-effective filter replacement
- RS 232 interface
- Leak sensor as standard
- Ready to use, ready to connect, incl. filter cartridges
| Feed water requirements: drinking water acc. to DIN 2000 | |
| Feed water temperature (°C) | +2-35 |
| Feed water pressure (bar) | 0.5-6 |
| Manganese, aluminium and iron content (ppm) | <0.05 |
| Free chlorine (ppm) | <4 |
| Silt density index (SDI) | Max. 3 |
| pH range | 4-11 |
Typical applications: cell culture media, molecular biology and microbiology.
| Type | OmniaTap UV/UF 20 l/h with 10 l storage tank |
| Vol. | 10 l |
| Conductivity of high-purity water, type I | 0.055 µS/cm |
| Conductivity of pure water, type II | 0.067-0.1 µS/cm |
| Resistance of high-purity water, type I | 18.2 MΩ·cm |
| Resistance of pure water, type II | 10-15 MΩ·cm |
| Withdrawal capacity of high-purity water, type I | 1.6 l/min |
| Withdrawal capacity of pure water, type II | 20 l/h |
| Bacteria content of high-purity water, type I | <0,1 KbE/ml |
| Endotoxin content of high-purity water, type I | <0.001 EU/ml |
| TOC value of high-purity water, type I | 1-5 ppb |
| Particle content of high-purity water, type I | <1 particle per ml (particle size >0.2 μm) |
| Port | RS-232 |
| Width | 390 mm |
| Depth | 615 mm |
| Height | 720 mm |
| Weight | 21.2 kg |
| Min. operating pressure | 2 bar |
| Max. operating pressure | 6 bar |
| Ambient temperature | 2-35 °C |
| Connection | R 3/4″ |
| Mains connection | 100-240 V, 50/60 Hz |