Acetic acid ethyl ester, ROTISOLV® min. 99,9 %, Pestilyse® plus, 2.5 l, glass

Catalog nr. 7565.1
Carl Roth

Volume: 2.5 liter
Value Packs: 1 piece
Price:
Sale price€105,25
Ask quote for bulk order

Description

Acetic acid ethyl ester ROTISOLV® min. 99,9 % Pestilyse® plus is a high-purity ester solvent for chromatographic and GC laboratory applications. It is identified by CAS number 141-78-6, empirical formula C₄H₈O₂, molar mass 88,11 g/mol, density 0,9003 g/cm³, flash point −4 °C and boiling point 77,1 °C, with EG nr. 205-500-4. The 2,5 l glass pack suits analytical workflows that need a clean, volatile organic solvent for extraction, sample work-up and chromatographic mobile-phase or rinse steps. Pestilyse® plus designation addresses pesticide-residue and trace-level methods where solvent blank quality is critical. This acetic acid ethyl ester from manufacturer Carl ROTH is offered at the stated minimum purity for GC-oriented and related chromatographic use. Density, boiling point and flash point data support safe handling and method alignment. Laboratories performing residue analysis, organic sample preparation or solvent-based purification benefit from a consistent ethyl ester grade in a practical glass bottle format.

This article is part of HPLC & LC-MS grade solvents, in Solvents. See also Analytical grade solvents (p.a.).

Key features

  • Assay (GC): ≥99.9 %
  • Colour (APHA): ≤10
  • Water (KF): ≤0.05 %
  • Free acid (as CH3COOH): ≤0.003 %
  • Evaporation residue: ≤0.0001 %
  • GC/FID suitability (as 2-octanol): ≤15 ng/ml
  • GC/ECD suitability (as heptachloro epoxide): ≤10 ng/l
  • GC/ECD dioxins, furans and PCBs (as lindane): ≤5 ng/l
  • GC/ECD pesticides (as lindane): ≤5 ng/l
  • GC/NPD pesticides (as parathion): ≤5 ng/l
  • CAS number: 141-78-6
  • Pack size: 2,5 l glass
  • Purity: ROTISOLV® min. 99,9 %, Pestilyse® plus
  • Empirical formula: C₄H₈O₂
  • Molar mass: 88,11 g/mol
  • Density: 0,9003 g/cm³
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Compliance & Safety Information

GHS02 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336EU May cause drowsiness or dizziness
H066 Repeated exposure may cause skin dryness or cracking

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P243 P243 – No description available
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Recently viewed

You may also like

Questions about Acetic acid ethyl ester, ROTISOLV® min. 99,9 %, Pestilyse® plus, 2.5 l, glass

What is this article?

Acetic acid ethyl ester, ROTISOLV® min. 99,9 %, Pestilyse® plus, 2.5 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Lab chemicals.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?