Description
Buffer solution DuraCal pH 6.00 (25 °C) is a colourless pH calibration standard intended for accurate electrode adjustment and pH-value determination. Specified at 25 °C, it delivers a defined pH 6.00 reference point suitable for single- or multi-point calibration workflows in analytical and quality-control laboratories. The solution is packed in a convenient 500 ml unit and exhibits a density of about 1 g/cm³ with a boiling point of 100 °C, reflecting typical aqueous buffer behaviour under ordinary laboratory conditions. A Hamilton certificate is supplied with each bottle, enabling traceable documentation of the buffer value. This DuraCal preparation from manufacturer HAMILTON supports reliable measurements in research, industrial QC and educational settings focused on determination of physical properties. The colourless formulation allows straightforward visual inspection during use, and the 500 ml volume provides ample capacity for repeated calibrations. Integrate this pH 6.00 buffer into routine calibration sequences whenever a near-neutral acidic reference is required together with other DuraCal standards.
This article is part of pH buffers & conductivity standards, in Buffers & pH solutions.
Key features
- pH value (25 °C): 6.00 ±0.02
- Pack size: 500 ml
- Density: ~1 g/cm³
- Boiling point: 100 °C
- Product type: pH buffer solution
- pH value: 6,00 (25 °C)
- Appearance: colourless
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
Hazard Statements (H-Phrases)
Recently viewed
You may also like
Questions about Buffer solution DuraCal pH 6.00 (25 °C), colourless, with Hamilton certificate
What is this article?
Buffer solution DuraCal pH 6.00 (25 °C), colourless, with Hamilton certificate is the article on this page. Luminix Health distributes HAMILTON for laboratory use. It sits in pH buffers & conductivity standards, inside Buffers & pH solutions, in Lab chemicals.
A pH buffer for calibration has a stated pH at a stated temperature, often traceable. A conductivity standard has a stated conductivity. They are not general reagents and they should not be poured back into the bottle. The temperature of the measurement has to be the temperature on the label, or the meter has to compensate.
A buffer resists a change in pH when a little acid or base is added. It does that because a weak acid and its conjugate base are both present. A pH buffer used to calibrate a meter has a stated value at a stated temperature. A biological buffer such as Tris or HEPES is chosen because it holds the pH of a living system and does not poison it. Conductivity standards are the sister articles for a conductivity meter. The ions are on PubChem. Electrode calibration practice sits with EURAMET and BELAC.
Which category should I open next?
The category is Buffers & pH solutions. The sub-category is pH buffers & conductivity standards. The catalogue is Lab chemicals.
Shelves beside this one are Biological buffers (Tris, HEPES, MOPS) and Buffers (other).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.