Description
Diisopropyl ether is an analytical-grade solvent offered as ROTIPURAN® with a minimum purity of 99 % p.a. Stabilised with BHT, it has the empirical formula C₆H₁₄O, a molar mass of 102,18 g/mol, and a density of 0,72 g/cm³. The boiling range is 67 to 70 °C and the flash point is −28 °C, parameters relevant to laboratory handling and process planning. Identified by CAS number 108-20-3, this ether is Available from manufacturer Carl ROTH, the ROTIPURAN® p.a. quality targets laboratories that need a clearly specified purity solvent for extraction, reaction media, and general analytical work. The BHT stabiliser supports product quality during use. Stated molar mass and density values facilitate accurate volume-to-mass conversions and documentation in validated methods. The one-litre glass pack suits routine consumption in research, quality-control, and teaching laboratories working with organic solvents under appropriate safety controls and local handling procedures for flammable liquids.
This article belongs on Technical & synthesis grade solvents, in Solvents.
Key features
- Assay (GC): ≥99.0 %
- Density (20 °C): 0.723-0.726
- Water (KF): ≤0.1 %
- Evaporation residue: ≤0.001 %
- Lead (Pb): ≤0.00001 %
- Cadmium (Cd): ≤0.000005 %
- Calcium (Ca): ≤0.00005 %
- Chromium (Cr): ≤0.000002 %
- Iron (Fe): ≤0.00001 %
- Cobalt (Co): ≤0.000002 %
- CAS number: 108-20-3
- Pack sizes: 1 l, 2.5 l, 10 l, 5 l
- EG nr.: 203-560-6
- Molar mass: 102,18 g/mol
- Grade: ROTIPURAN®, min. 99 %, p.a.
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
Danger
Hazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Questions about Diisopropyl ether, ROTIPURAN®, min. 99 %, p.a., 1 l, glass
What is this article?
Diisopropyl ether, ROTIPURAN®, min. 99 %, p.a., 1 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Technical & synthesis grade solvents, inside Solvents, in Lab chemicals.
Technical and synthesis grades are for cleaning, for a coarse extraction and for chemistry that does not end in a chromatogram. They cost less because more impurity is allowed. They are the wrong bottle to make a mobile phase or a volumetric standard.
A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.
Which category should I open next?
The category is Solvents. The sub-category is Technical & synthesis grade solvents. The catalogue is Lab chemicals.
Shelves beside this one are Analytical grade solvents (p.a.), HPLC & LC-MS grade solvents, Dry & deuterated solvents (NMR, synthesis) and Green & alternative solvents.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.