Description
Drying and heating oven FP260-230V is a forced-convection laboratory chamber intended for drying and thermal tasks from +10 °C above ambient temperature up to +300 °C. High temperature accuracy is achieved with APT.line™ technology, while adjustable fan speed and electromechanical exhaust-air flap actuation allow temperature and air-circulation conditions to be set with confidence. The controller offers time-segment and real-time programming, and an internal data logger stores measured values that can be retrieved via USB in open format. An Ethernet interface enables computer connectivity in the laboratory. Safety features include a class 2 temperature selector limiter and a class 3.1 temperature selector monitor in accordance with DIN 12880, with optical and acoustic alarms selectable on the controller. Two chrome-plated racks are supplied, units up to 115 L are stackable, and ergonomic handle design supports comfortable operation. This Binder FP series material test chamber delivers short drying times and rapid heat-up; program functions and the controllable fan help keep process conditions under control over longer periods. Pack size is 1 pc with a net weight of 91 kg.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Temperature range: +10 °C above ambient to +300 °C
- Technology: APT.line™
- Convection: Forced air with adjustable fan speed
- Interface: Ethernet
- Safety: DIN 12880 class 2 limiter / class 3.1 monitor
- Manufacturer: Binder
- UNSPSC: 41104501
- Interior dimensions: 650 × 512 × 780 mm (W × D × H)
- Exterior dimensions: 810 × 786 × 962 mm (W × D × H)
- Weight, empty: 82 kg
- Voltage: 230 V, 50/60 Hz
- Nominal power: 2.5 kW
- Temperature uniformity at 150 °C: ±1.7 K
- Temperature fluctuation at 150 °C: ±0.4 K
- Heating-up time to 150 °C: 19 min
- Recovery time after a 30 s door opening at 150 °C: 6 min
- Air change rate at 100 °C: 9 x/h
- Shelves, standard / maximum: 2/8
- Load per rack: 40 kg
- Permitted load: 270 kg
- Energy consumption at 100 °C: 275 Wh/h
- Energy consumption at 150 °C: 465 Wh/h
- Wall clearance, side: 100 mm
- Wall clearance, back: 160 mm
- Sound pressure level: 43 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about Drying and heating chambers FP260-230V
What is this article?
Drying and heating chambers FP260-230V is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.