Description
Dynamic climate chamber MK 56-230V is a compact environmental test chamber designed for cyclic heat and cold testing across a wide temperature range from −40 °C to +180 °C. With a nominal volume of 60 l, it provides a practical alternative to complex custom solutions for reproducible thermal stress and ageing studies. APT.line™ preheating chamber technology supports homogeneous temperature distribution, while programmable condensation protection helps safeguard sensitive samples. An intuitive touchscreen controller enables time-segment and real-time programming, supported by an adjustable ramp function, integrated chart recorder and real-time clock. Measured values are stored by an internal data logger and can be exported via USB in an open format; Ethernet provides computer connectivity. The stainless-steel interior includes one stainless-steel shelf, a viewing window with interior lighting and a 50 mm access port with silicone plug on the left side. Class 2 temperature safety device (DIN 12880) with optical alarm, comprehensive fault diagnostics with optical and acoustic signals, and APT-COM™ Basic Edition multi-management software complete the package. Cooling is provided by a compression refrigeration system using CFC-free refrigerant R-452A. Four castors (two lockable) aid mobility. This MK-series unit from manufacturer Binder is suited to demanding laboratory and industrial temperature cycling applications.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Nominal volume: 60 l
- Temperature range: −40 °C to +180 °C
- Preheating technology: APT.line™
- Controller: Intuitive touchscreen with time-segment and real-time programming
- Interior: Stainless steel with 1 stainless steel rack
- Manufacturer: Binder
- UNSPSC: 41104900
- Interior dimensions: 400 × 350 × 420 mm (W × D × H)
- Exterior dimensions: 720 × 778 × 1445 mm (W × D × H)
- Weight, empty: 165 kg
- Voltage: 230 V, 50 Hz
- Nominal power: 2.8 kW
- Temperature uniformity, depending on setpoint: ±0.5...±1.5 K
- Temperature fluctuation, depending on setpoint: ±0.1...±0.5 K
- Average heating-up rate between -40 °C and 180 °C: 5 K/min
- Cooling-down time from 180 °C to -40 °C: 90 min
- Average cooling-down time between 180 °C and -40 °C: 5 K/min
- Shelves, standard / maximum: 1/4
- Load per rack: 15 kg
- Permitted load: 60 kg
- Energy consumption at 20 °C: 600 Wh/h
- Wall clearance, side: 200 mm
- Wall clearance, back: 300 mm
- Sound pressure level: 59 dB(A)
- Technical Information Sheet:
- Data Sheet:
Recently viewed
You may also like
Questions about Dynamic climate chambers MK 56-230V
What is this article?
Dynamic climate chambers MK 56-230V is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.