Description
Hydrometer 1,050–1,100 with thermometer 0+30 °C is a precision laboratory density instrument manufactured to DIN 12791 Series L50. It determines liquid density across the range 1,050 to 1,100 g/cm³ at a scale division of 0,0005 g/cm³ and a reference temperature of 20 °C. The instrument measures approximately 365 mm in length and features an enclosed thermometer spanning 0 to +30 °C, allowing density and temperature readings during the same immersion. Available as a single piece from manufacturer Geco-Gering, this hydrometer is intended for routine specific-gravity work in research, quality-control and process laboratory settings. The standardised L50 Series design according to DIN 12791 is well suited to aqueous solutions and other liquids whose density lies within the stated interval. Simultaneous temperature indication aids consistent recording of sample conditions, and the finely graduated scale supports clear, repeatable density determinations for documentation and further analytical calculation without a separate thermometer on the bench.
This article is part of Hydrometers, in Density & viscosity measurement.
Key features
- Pack size: 1 pc
- Density: range: 1,050–1,100 g/cm³
- Scale division: 0,0005 g/cm³
- Length: approx. 365 mm
- Thermometer range: 0+30 °C
- Standard: DIN 12791 Series L50
Recently viewed
You may also like
Questions about Hydrometer 1,050 - 1,100 with WG-thermometer 0+30C
What is this article?
Hydrometer 1,050 - 1,100 with WG-thermometer 0+30C is the article on this page. Luminix Health distributes Geco-Gering for laboratory use. It sits in Hydrometers, inside Density & viscosity measurement, in Lab instruments.
A hydrometer floats in a liquid and the stem reading is the density or a related scale such as Brix. The liquid has to be at the temperature printed on the stem, or a correction is required. A chip on the stem changes the reading. One hydrometer does not cover every density.
Density is mass divided by volume. A hydrometer floats at a depth that depends on the density of the liquid. A pycnometer is a vessel of known volume that is weighed full. Viscosity is the resistance to flow. A capillary viscometer times how long a volume takes to fall through a tube. Both measurements need a stated temperature, because liquids change density and viscosity as they warm. The units trace to the BIPM and to NIST.
Which category should I open next?
The category is Density & viscosity measurement. The sub-category is Hydrometers. The catalogue is Lab instruments.
Shelves beside this one are Viscometers and Density meters & pycnometers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.