Description
Insulation lid for 60 L drums is designed to retain heat on heated barrels and shorten warm-up times in laboratory and process settings. It is rated for a maximum permissible operating temperature of 90 °C and suits a nominal drum volume of 60 L (60,000 ml). The outer shell uses water-repellent polyester fabric, supporting reliable use around typical drum-heating workflows. Two openings with hook-and-loop (Velcro) closures allow filling or access without removing the lid, so thermal losses stay low during charging or sampling. Protection rating IP54 is specified for the assembly. The lid is intended for use with drum heater WODPX062 and helps keep process heat where it is needed on the vessel. Supplied from manufacturer Winkler, this accessory complements drum heating systems in categories such as heating jackets and container heaters. By limiting heat escape at the top of the drum, it supports more efficient temperature hold and faster reach of target process conditions when paired with a suitable heater and control setup.
This article is part of Muffle & tube furnaces, in Heating, drying & cooling.
Key features
- Pack size: 1 pc(s)
- Drum volume: 60 L
- Max. process temperature: 90 °C
- Protection rating: IP54
- Outer material: water-repellent polyester fabric
- Openings: 2 with Velcro fastener
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Insulating Lid 60L Tmax. 90°C
What is this article?
Insulating Lid 60L Tmax. 90°C is the article on this page. Luminix Health distributes Winkler for laboratory use. It sits in Muffle & tube furnaces, inside Heating, drying & cooling, in Lab instruments.
A muffle furnace surrounds a sample with heat for ashing or ignition, often to 1100 °C. A tube furnace heats a sample in a controlled atmosphere inside a tube. The maximum temperature and the chamber size are the specification. A drying oven is not a furnace.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Muffle & tube furnaces. The catalogue is Lab instruments.
Shelves beside this one are Heating mantles, Circulators, chillers & thermostats, Drying ovens & climate chambers, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.