LAUDA Hydro H 41 Water bath 230 V; 50/60 Hz

LAUDA Hydro H 41 water bath is a stainless-steel laboratory water bath designed for straightforward temperature control from 25 to 100 °C with a stated temperature constancy of ±0,1 K. A clear TFT display presents process data, while temperature setpoints can be adjusted and shown in 0,1 °C steps; timer values are set in hours and minutes via a foil keypad with concise symbols. Digital setpoint entry, switchable °C/°F indication and adjustable over- and under-temperature alarm thresholds up to ±10 K support routine bath work. Optical and acoustic alarms signal low water, temperature limit excursions and sensor break or short circuit, complemented by electronic monitoring of the temperature controller and three application-specific timer functions. The bath body, cover frame, sieve plate and heater are stainless steel; the vessel includes a drain cock. A double-walled, heat-insulating stainless-steel lid with inner curvature limits condensate drip-back; lid and sieve plate are supplied as standard. Useful bath volume ranges from 9,3 to 37,9 L in a 410 × 296 × 335 mm bath (overall unit 510 × 490 × 476 mm, approx. 22 kg). Maximum heating power is 1,5 kW on 230 V; 50/60 Hz. This Hydro H 41 unit from manufacturer Lauda suits general laboratory tempering tasks where stable water-bath conditions and simple operation are required.

This article is part of Water & oil baths, in Heating, drying & cooling.

Key features

• Pack size: 1 pc
• Working temperature range: 25 … 100 °C
• Temperature constancy: ±0,1 K
• Heating power max.: 1,5 kW
• Bath volume min./max.: 9,3 / 37,9 L
• Bath size (W×D×H): 410 × 296 × 335 mm
• Technical Information Sheet: