Description
Magigoo Pro PP-GF glue stick, for FDM/FFF 3D printers , Density (D) 1,02 g/cm³, Boiling point (bp) 100 °C
Magigoo PP-GF 3D glue stick has been specially developed for processing glass-reinforced polypropylene (GFPP) filaments and ensures that the prints adhere firmly when the print bed is hot and that the part is easy to remove after cooling.
WHY:Polypropylene (PP) is a thermoplastic semi-crystalline polymer with properties such as good strength, impact resistance and ductility, which makes it suitable for use as a construction material. However, PP is a soft material and, like most plastics, can be reinforced by the introduction of fibres to form a polymer composite. These materials are usually stiffer and stronger than the base polymer and can result in a material with a very high strength to weight ratio. Compared to most pure PP filaments, the GF30PP deforms more. This type of material requires a completely new adhesive formulation to develop its distinctive properties.HOW:Magigoo PP-GF has been developed and tested to work with 30% glass fibre filled polypropylene.
- Shake the bottle vigorously.
- Apply to the desired area by pressing the nib onto the bed (activating the inner valve) and spreading as required.
- Print according to the filament/printer manufacturer’s recommendations
- Allow to cool and remove.
- Cleaning - Wipe with a damp cloth.
For demanding prints, a 20 mm brim with 2 layers is recommended. Clean the build plate and align it well before printing.A closed printer is recommended.
| Version | Glue Stick |
Compliance & Safety Information
Warning
Hazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)