MSTFA, 12x100 mL

Catalog nr. 70127012100
Macherey-Nagel

Price:
Sale price€8.185,00
Ask quote for bulk order

Description

MSTFA is a silylating agent supplied as a 12 × 100 mL multipack for chromatography sample preparation. With CAS number 24589-78-4, the reagent is applied to convert polar analytes into silyl derivatives prior to gas chromatographic separation and detection. It forms part of the chromatography accessories portfolio and is intended for laboratories running frequent derivatization steps across multiple instruments or parallel methods. Available from manufacturer Macherey-Nagel, the twelve-bottle configuration supports higher-throughput GC workflows, shared stockrooms, and continuous analytical programmes. Transport documentation classifies the shipment under UN 3316 as a chemical test kit for this packing arrangement. GHS labelling carries the signal word Warning and addresses flammable liquid hazards as well as skin and eye irritation, requiring appropriate handling, storage discipline, and personal protective equipment. The multipack format reduces reorder frequency while keeping each 100 mL unit sealed until needed, which is practical for pharmaceutical, environmental, and general chemical analysis laboratories that rely on consistent silylation capacity.

This article is part of Chromatography standards (GC, HPLC, pesticides), in Analytical standards & reference materials.

Key features

  • CAS number: 24589-78-4
  • Pack size: 12 × 100 mL
  • Storage temperature: 2–8 °C
  • Product type: Silylating agent
  • EAN: 4046681090226
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Compliance & Safety Information

GHS02, flammableGHS07, harmfulWarning

Hazard Statements (H-Phrases)

H226Flammable liquid and vapour. H302Harmful if swallowed. H315Causes skin irritation. H319Causes serious eye irritation.

Precautionary Statements (P-Phrases)

P210Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233Keep container tightly closed. P240Ground and bond container and receiving equipment. P241Use explosion-proof [electrical/ventilating/lighting] equipment. P242Use non-sparking tools. P243Take action to prevent static discharges. P264Wash thoroughly after handling. P264WWash thoroughly after handling. P270Do not eat, drink or smoke when using this product. P280Wear protective gloves/protective clothing/eye protection/face protection. P280shWear protective gloves/protective clothing/eye protection/face protection. P301+P312IF SWALLOWED: Call a POISON CENTRE/doctor if you feel unwell. P302+P352IF ON SKIN: Wash with plenty of water. P303+P361+P353IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P330Rinse mouth. P332+P313If skin irritation occurs: Get medical advice/attention. P337+P313If eye irritation persists: Get medical advice/attention. P362+P364Take off contaminated clothing and wash it before reuse. P370+P378In case of fire: Use to extinguish. P403+P235Store in a well-ventilated place. Keep cool. P501Dispose of contents/container to.

Recently viewed

You may also like

Questions about MSTFA, 12x100 mL

What is this article?

MSTFA, 12x100 mL is the article on this page. Luminix Health distributes Macherey-Nagel for laboratory use. It sits in Chromatography standards (GC, HPLC, pesticides), inside Analytical standards & reference materials, in Lab chemicals.

A chromatography standard is the substance, or the mix, injected so a peak can be named and quantified. Pesticide mixes, residual-solvent mixes and single-compound standards are different articles. The concentration and the solvent are the specification. The solvent has to be one the method may contain.

A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?