BOLA Moon-Shaped Stirrer Shafts, L 1000 mm Ø 10 mm NS 29/32 PTFE-coated STAINLES

N° de catalogue C37619
Bohlender

Prix:
Prix de vente€191,20
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

BOLA half-moon stirring shafts combine a PTFE-coated stainless steel shaft with a tiltable half-moon stirring blade whose double groove and blade holder are made entirely of PTFE. This 1000 mm shaft has a diameter of 10 mm and a chuck diameter of 8,0 mm, and is intended for ground joints NS 29/32. Blade dimensions according to the manufacturer drawing are 90 mm × 24 mm × 3 mm. Because the process medium contacts only PTFE, the assembly offers universal chemical resistance in demanding laboratory mixing work. The half-moon geometry supports efficient agitation in round-bottom and similar vessels while the coated shaft maintains mechanical strength. Supplied as a single piece with a net weight of 0,466 kg, this stirrer from manufacturer Bohlender suits routine and specialised applications where inert wetted surfaces and reliable ground-joint compatibility are required. It belongs to the flat-blade stirrer category and is well suited to chemical, pharmaceutical and research laboratories that need durable PTFE-protected stirring equipment.

This article is part of Distillation heads, adapters & columns, in Distillation & extraction glassware.

Key features

  • Pack size: 1 pc
  • Length: 1000 mm
  • Shaft diameter: 10 mm
  • Chuck diameter: 8,0 mm
  • Ground joint: NS 29/32
  • Blade dimensions (A–B–C): 90 × 24 × 3 mm
  • Technical Information Sheet: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Recently viewed

You may also like

Questions sur BOLA Moon-Shaped Stirrer Shafts, L 1000 mm Ø 10 mm NS 29/32 PTFE-coated STAINLES

Quel est cet article ?

BOLA Moon-Shaped Stirrer Shafts, L 1000 mm Ø 10 mm NS 29/32 PTFE-coated STAINLES est l'article présenté sur cette page. Luminix Health distribue Bohlender pour un usage en laboratoire. Il fait partie de Accessoires d'agitation & de mélange, dans Agitation, secouage & mélange, au sein de Instruments de laboratoire.

Les accessoires d'agitation sont les noix, pinces de statif et boutons de rechange qui maintiennent un agitateur à hélice au-dessus du récipient. Le statif doit porter la masse du moteur, pas seulement celle du récipient.

L'agitation maintient un mélange homogène ou aide un solide à se dissoudre. Un agitateur magnétique fait tourner un barreau dans un récipient fermé. Un agitateur à hélice entraîne un arbre lorsque le liquide est visqueux ou le volume important. Un vortex agite un tube. Un agitateur orbital déplace un portoir entier ou une plaque. La forme du mobile et la vitesse décident si le liquide se mélange vraiment ou tourne simplement. Les récipients agités sont répertoriés sous verrerie de laboratoire ISO.

Quelle catégorie consulter ensuite ?
Que vérifier avant de commander ?

Si cette page propose une fiche de données de sécurité, utilisez ce document du fabricant. Les mentions de danger n'ont pas leur place dans la description commerciale. Pour un conditionnement, une qualité ou un certificat absent de la page, envoyez une demande de devis ou contactez l'équipe.

Comment fonctionnent la commande et la livraison ?

Luminix Health expédie cet article depuis le cœur de l'Europe. Livraison dans toute l'Europe, deux à cinq jours si en stock. La livraison standard est gratuite à partir de €250 hors TVA. La chaîne du froid et les marchandises dangereuses sous ADR ne sont jamais comprises dans cette livraison gratuite. Les conditions figurent dans la politique d'expédition. L'index des marques est sur shop by brand. Qui nous sommes : à propos.

Quels autres catalogues ouvrir ?