Description
Dispenser seripettor®, 0,2 - 2 ml, incl. dosing needle, suction pipe, spare dosing unit and PP-adapters GL32 and S40
Properties:
- Dispensing: push plunger down, fills automatically
- Dispensing sterile media: screw the valve block with filling tube onto the filled bottle, seal the valve block with the cap, attach the autoclavable sterile filter (0.2 µm) at the side and autoclave at 121 °C. Remove the cap from the valve block under clean bench conditions, screw in the sterile dispensing unit and attach the actuating unit
- Suitable for serial dispensing by means of flexible PTFE dispensing hose with a safety handle, length approx. 800 mm, please order separately
- If the snug fitting plunger seal is worn, the dispensing unit can be changed
- Screws directly onto bottle with thread GL 45
Limits of use: 15 to 40 °C, max. vapour pressure 500 mbar, max. density 2.2 g/cm3, viscosity 300 mm2/s (2-ml device), 150 mm2/s (10-ml device) or 75 mm2/s (25-ml device)
For aqueous solutions, buffer solutions, culture media, thinned, non-oxidised acids and agar culture media up to max. 60 °C.Materials in contact with media: FEP, PP, PE, EPDM
Delivery incl. discharge tube, filling tube, replacement dispensing unit and PP thread adapter.
Technical Information
| Volume | 0,2-2 ml |
| Graduation | 0,04 ml |
| Nominal volume | 2 ml |
| Correctness | ±24 µl |
| Variation coefficient | ±4 µl |
| Operating temperature | +15 - +40 °C |
| Adapter | GL 32-33, GL 38, S 40 |
| Suction tube length | 250 mm |