Methanol ROTISOLV®, , min. 99.95 % HPLC Ultra Gradient Grade, 1 l, verre

Catalog nr. X948.1
Carl Roth

Volume: 1 liter
Quantité: 1 pièce
Prix:
Prix réduit€37,55
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Methanol ROTISOLV®, min. 99.95 %. HPLC Ultra Gradient Grade, est un solvant chromatographique de haute pureté Avec le numéro CAS 67-56-1, la formule empirique CH₃OH, la masse molaire 32.04 g/mol et le numéro EG 200-659-6, il est spécifié pour les applications HPLC ultra gradient dans les laboratoires d'analyse et d'environnement. Les propriétés physiques clés comprennent une densité de 0.79 g/cm³, un point d'éclair de 9.7 °C et un point d'ébullition de 65 °C ; le numéro UN est 1230. Cette qualité du fabricant Carl ROTH est destinée à la chromatographie liquide et aux méthodes de séparation associées où une teneur minimale de 99.95 % soutient une performance de gradient à faible bruit de fond. Le conditionnement en verre d'un litre est pratique pour l'approvisionnement courant en solvant HPLC sur la paillasse ou dans les armoires à solvants. L'utilisation typique couvre les flux de travail d'analyse environnementale et de chromatographie liquide qui exigent une qualité de methanol constante pour la préparation de la phase mobile, la dilution des échantillons et le rinçage du système dans des conditions ultra gradient.

Cet article fait partie de Solvants de qualité HPLC & LC-MS, dans Solvants. Voir aussi Solvants de qualité analytique (p.a.).

Caractéristiques

  • Dosage (GC): ≥99.95 %
  • Couleur (Hazen): ≤10
  • Eau (KF): ≤0.03 %
  • Acide libre (sous forme de CH3COOH): ≤0.002 %
  • Matière non volatile: ≤0.0001 %
  • >260 nm: ≥99 %
  • 230 nm: ≥80 %
  • 220 nm: ≤0.004 AU
  • 210 nm: ≥40 %
  • 235 nm: ≤0.002 AU
  • Numéro CAS: 67-56-1
  • Conditionnements: 1 l, 2.5 l
  • N° CE: 200-659-6
  • Pureté: min. 99.95 % HPLC Ultra Gradient Grade
  • Formule brute: CH₃OH
  • Masse molaire: 32.04 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS06GHS08 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H301+ H301+ – No description available
H311+ H311+ – No description available
H331 Toxic if inhaled
H370 Causes damage to organs

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P270 P270 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308+P311 P308+P311 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Methanol ROTISOLV®, , min. 99.95 % HPLC Ultra Gradient Grade, 1 l, verre

What is this article?

Methanol ROTISOLV®, , min. 99.95 % HPLC Ultra Gradient Grade, 1 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité HPLC & LC-MS, inside Solvants, in Produits chimiques.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?