Methanol, ROTISOLV®, min. 99.8 %, UV/IR-Grade, 2.5 l, verre

Catalog nr. T909.1
Carl Roth

Volume: 2,5 liter
Quantité: 1 pièce
Prix:
Prix réduit€55,40
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Methanol ROTISOLV® est un solvant alcoolique de haute pureté avec une teneur minimale de 99.8 %, fourni comme matériau UV/IR-Grade pour des applications spectroscopiques. Enregistré sous le numéro CAS 67-56-1 avec la formule empirique CH₃OH, il a une masse molaire de 32.04 g/mol et une densité de 0.79 g/cm³. Le point d'ébullition est de 65 °C et le point d'éclair est de 9.7 °C, ce qui définit ses caractéristiques de manipulation et de procédé au laboratoire. Cette présentation en verre de 2.5 l du fabricant Carl ROTH est destinée à la spectroscopie ultraviolet-visible et aux travaux UV/IR où une faible absorbance de fond et une qualité de solvant constante sont importantes. Le Methanol de cette qualité est largement utilisé pour la dilution d'échantillons, la préparation de phase mobile et les mesures spectrométriques en chimie analytique. La spécification ROTISOLV® vise les techniques optiques et de séparation qui exigent un solvant protique polaire fiable. EG-Nr. 200-659-6 identifie la substance dans les systèmes d'inventaire chimique européens pour la documentation et les enregistrements de conformité du laboratoire.

Cet article fait partie de Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques

  • Dosage (GC): ≥99.8 %
  • Eau (KF): ≤0.1 %
  • Acidité: ≤0.005 meq/g
  • 260-400 nm: ≥98 %
  • 250 nm: ≥96 %
  • 240 nm: ≥80 %
  • 230 nm: ≥74 %
  • 225 nm: ≥68 %
  • 220 nm: ≥50 %
  • 210 nm: ≥20 %
  • Numéro CAS: 67-56-1
  • Conditionnement: 2.5 l verre
  • N° CE: 200-659-6
  • Pureté: min. 99.8 %
  • Masse molaire: 32.04 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS06GHS08 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H301+ H301+ – No description available
H311+ H311+ – No description available
H331 Toxic if inhaled
H370 Causes damage to organs

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P270 P270 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308+P311 P308+P311 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Methanol, ROTISOLV®, min. 99.8 %, UV/IR-Grade, 2.5 l, verre

What is this article?

Methanol, ROTISOLV®, min. 99.8 %, UV/IR-Grade, 2.5 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité analytique (p.a.), inside Solvants, in Produits chimiques.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?