Solution étalon ICP de niobium, ROTI®Star, 10 000 mg/l Nb, densité (D) 1 g/cm³

Catalog nr. 2531.1
Carl Roth

Volume: 100 ml
Quantité: 1 pièce
Prix:
Prix réduit€160,20
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

La solution étalon ICP de niobium est une solution d'étalonnage monoelement ROTI®Star pour la spectroscopie atomique, préparée à 10000 mg/l de Nb. Les propriétés physiques indiquées comprennent une masse volumique de 1 g/cm³ et un point d'ébullition d'environ 100 °C, avec le numéro ONU 2922. La solution est fournie dans un conditionnement de 100 ml adapté à la préparation courante de gammes d'étalonnage en ICP-OES et flux de travail ICP associés. La solution étalon ICP de niobium du fabricant Carl ROTH permet la détermination quantitative du niobium dans les laboratoires qui s'appuient sur des étalons monoelements pour la mise en place de méthodes ICP-OES et l'étalonnage d'instruments. La concentration définie de 10000 mg/l de Nb permet une dilution aisée vers les plages de travail utilisées dans les analyses environnementales, de matériaux et de recherche. Une masse volumique proche de 1 g/cm³ et un point d'ébullition proche de celui des matrices aqueuses facilitent les manipulations habituelles sur paillasse. Choisissez cet étalon de niobium ROTI®Star lorsqu'une unité de 100 ml prête à l'emploi à 10000 mg/l de Nb est requise pour des séquences d'étalonnage en spectroscopie atomique.

Cet article fait partie de Étalons ICP, AAS et ioniques, dans Étalons analytiques et matériaux de référence.

Caractéristiques principales

  • c (Nb) en tant que Nb dans 5 % HNO3/5 % HF : 10000 mg/l
  • Conditionnement : 100 ml
  • Masse volumique : 1 g/cm³
  • Point d'ébullition : ~100 °C
  • Gamme de produits : ROTI®Star
  • Concentration : 10000 mg/l Nb
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS05, corrosiveGHS06, toxicDanger

Hazard Statements (H-Phrases)

H290Peut être corrosif pour les métaux. H301+H331Toxique par ingestion ou par inhalation. H310Mortel par contact cutané. H314Provoque de graves brûlures de la peau et de graves lésions des yeux. EUH071Corrosif pour les voies respiratoires.

Precautionary Statements (P-Phrases)

P280Porter des gants de protection/des vêtements de protection/un équipement de protection des yeux/du visage.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Solution étalon ICP de niobium, ROTI®Star, 10 000 mg/l Nb, densité (D) 1 g/cm³

What is this article?

Solution étalon ICP de niobium, ROTI®Star, 10 000 mg/l Nb, densité (D) 1 g/cm³ is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Étalons ICP, AAS & ions, inside Étalons analytiques & matériaux de référence, in Produits chimiques.

An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.

A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?