Flushing filter/ Backflow prevention, G1'' / R3/4''
€499,00
Catalog nr.: W3T304320
Menge
Flushing filter/Backflow preventer combo G1'' /R3/4''
This network separation corresponds to the DVGW / DIN 1988 Part 4. The components are assembled and equipped with wall brackets, plugs and wall brackets, plugs and screws to enable easy installation.
Consisting of W2T807752 and W2T941261
1 x W2T941261
Flushing filter 3/4'', 2,4m³/h
Particle filter for water according to DIN/DVGW R221 for horizontal and vertical installation via coupling. Upper part made of yellow brass, housing made of high-quality plastic.
Filter cover made of tragomide, filter element made of synthetic gauze.
Rinsing with raw water of the whole filter area, without interrupting the water supply. Flushing of the entire filter surface with raw water, without interrupting the water supply.
The complete rinsing of particles takes place automatically after opening the ball valve via the integrated drain connection.
Mounting accessories, rotatable connection piece.
Replacement cartrdige: W2T526934
Technical Data:
Flow rate: 2.4 m3/h
Pressure loss: 0.2 bar
Pore size of filtration: 85 µm
Operating pressure: max. 10 bar
Operating temperature: 30°C
Connection: R 3/4''
Installation length: 118 mm
Height in total: 255 mm
Installation depth: 124 mm
Weight: 1.7 kg
1x W2T807752
Backflow preventer CA295:
Suitable for the protection of drinking water systems against back pressure, back flow and back syphonage.
Fluids up to and including liquid category 3 to EN 1717 are protected.
Approvals:
NF, WRAS, KIWA, BELGAQUA, SVGW
Media: Drinking Water
Liquid category (EN1717): class 3
Body material:
brass, dezincification resistant
Port connection: external threads
Port diameter: G 1'' / 3/4''
Mounting position: horizontal
Max. media temperature: 65°C
Maximum inlet pressure: 10 bar
Minimum inlet pressure: 1.5 bar
Additional descriptions
•Integral strainer
•Compact construction
•Easy access to all internal components
•Low pressure loss and high flow rate performance
•All materials are ACS approved
•All materials are KTW approved
•Approved by TUEV LGA for noise Group 2
•Tested according to EN 14367
This network separation corresponds to the DVGW / DIN 1988 Part 4. The components are assembled and equipped with wall brackets, plugs and wall brackets, plugs and screws to enable easy installation.
Consisting of W2T807752 and W2T941261
1 x W2T941261
Flushing filter 3/4'', 2,4m³/h
Particle filter for water according to DIN/DVGW R221 for horizontal and vertical installation via coupling. Upper part made of yellow brass, housing made of high-quality plastic.
Filter cover made of tragomide, filter element made of synthetic gauze.
Rinsing with raw water of the whole filter area, without interrupting the water supply. Flushing of the entire filter surface with raw water, without interrupting the water supply.
The complete rinsing of particles takes place automatically after opening the ball valve via the integrated drain connection.
Mounting accessories, rotatable connection piece.
Replacement cartrdige: W2T526934
Technical Data:
Flow rate: 2.4 m3/h
Pressure loss: 0.2 bar
Pore size of filtration: 85 µm
Operating pressure: max. 10 bar
Operating temperature: 30°C
Connection: R 3/4''
Installation length: 118 mm
Height in total: 255 mm
Installation depth: 124 mm
Weight: 1.7 kg
1x W2T807752
Backflow preventer CA295:
Suitable for the protection of drinking water systems against back pressure, back flow and back syphonage.
Fluids up to and including liquid category 3 to EN 1717 are protected.
Approvals:
NF, WRAS, KIWA, BELGAQUA, SVGW
Media: Drinking Water
Liquid category (EN1717): class 3
Body material:
brass, dezincification resistant
Port connection: external threads
Port diameter: G 1'' / 3/4''
Mounting position: horizontal
Max. media temperature: 65°C
Maximum inlet pressure: 10 bar
Minimum inlet pressure: 1.5 bar
Additional descriptions
•Integral strainer
•Compact construction
•Easy access to all internal components
•Low pressure loss and high flow rate performance
•All materials are ACS approved
•All materials are KTW approved
•Approved by TUEV LGA for noise Group 2
•Tested according to EN 14367
Flushing filter/ Backflow prevention, G1'' / R3/4''
1 piece
€499,00