3DLac Plus Spray Adhesive, 100 ml, pump spray bottle

3DLac Plus Spray Adhesive is a spray adhesive for 3D printing supplied in a 100 ml pump spray bottle. Density (D) is 0,82 to 0,83 g/cm³, the flash point (flp) is <0 °C and the boiling point (bp) is >45 °C. The 100 ml pump spray bottle is an accessory for conventional 3D printing and belongs with adhesives for 3D printing. Laboratories and workshops running conventional 3D printing can specify this 100 ml spray when a pump spray bottle is the required pack. From manufacturer 3DLac, 3DLac Plus Spray Adhesive is offered as a 100 ml pump spray bottle with density 0,82 to 0,83 g/cm³. Flash point below 0 °C and boiling point above 45 °C are the stated thermal properties of the adhesive as supplied. Users choosing adhesives for 3D printing may select the 100 ml pump spray bottle for conventional 3D printing accessory use. 3DLac Plus Spray Adhesive is thus the 100 ml pump spray adhesive defined by density 0,82 to 0,83 g/cm³, flash point <0 °C and boiling point >45 °C.

Key features

• Pack size: 100 ml pump spray bottle
• Density: 0,82 to 0,83 g/cm³
• Flash point: <0 °C
• Boiling point: >45 °C
• UN nr.: 1993
• UNSPSC: 31201601
• Safety Data Sheet: