Beschreibung
Heating cable PILZ® WBQ (350W/m) silicate fibre insulated 825W, length 2,5m, Tmax. 900°C 230V, connecting cable 0,4m
Operation together with a temperature controller is always recommended.
Technical Data/Structure
- Two heating spirals arranged in parallel
- Silicate fibre insulated heating cable
- Outer braid: flexible silicate fibre
- Without protective conducter
- Nominal voltage: 230 VAC
- Mains connection: ready for connection 0,4m
- Construction type: not moisture resistant
- Dimensions: 30 x 8,0 mm
- Min. bending radius: > 10 mm
Application
In laboratories and experimental facilities where an easily employed system is
desired to heat shapes and parts to high temperatures or where it is important
to ensure short heating-up periods.
Advantages
- very high and constant heating power output per meter
- high operating temperature
- extremely flexible
- quick and easy installation
- cost effective
Please note:
- the high power output (W/m) requires a good heat-transfer
contact with the object to be heated.
- to avoid overheating, heating tapes or cables must installed in such
a way that they are not in contact with each other or overlapping.
- the surface temperature of the switched on heating system
is always higher than the pipe temperature.
- series resistance heating cables and tapes must be operated
with a temperature controller
Operation together with a temperature controller is always recommended.
old item number: WBQ00901-230XX900-02500875
Operation together with a temperature controller is always recommended.
Technical Data/Structure
- Two heating spirals arranged in parallel
- Silicate fibre insulated heating cable
- Outer braid: flexible silicate fibre
- Without protective conducter
- Nominal voltage: 230 VAC
- Mains connection: ready for connection 0,4m
- Construction type: not moisture resistant
- Dimensions: 30 x 8,0 mm
- Min. bending radius: > 10 mm
Application
In laboratories and experimental facilities where an easily employed system is
desired to heat shapes and parts to high temperatures or where it is important
to ensure short heating-up periods.
Advantages
- very high and constant heating power output per meter
- high operating temperature
- extremely flexible
- quick and easy installation
- cost effective
Please note:
- the high power output (W/m) requires a good heat-transfer
contact with the object to be heated.
- to avoid overheating, heating tapes or cables must installed in such
a way that they are not in contact with each other or overlapping.
- the surface temperature of the switched on heating system
is always higher than the pipe temperature.
- series resistance heating cables and tapes must be operated
with a temperature controller
Operation together with a temperature controller is always recommended.
old item number: WBQ00901-230XX900-02500875