Beschreibung
pH 50 VioLab benchtop pH meter, incl. buffer solution,, electrode holder and mains adapter
- Large screen with simultaneous display of pH or mV value and temperature
- Automatic or manual temperature compensation
- Automatic calibration
- Saves the current calibration
- Confirmation when a stable measured value is reached
Note: when using pH single-rod measuring cells with an integrated temperature gauge from other manufacturers, it is possible that the temperature gauge will not be recognised by the pH meter. Please use only the products recommended as accessories. This problem does not exist for sensors without a temperature gauge.
Delivery incl. NT55 external temperature gauge, buffer solutions (pH 4.01 and 7.00, each 50 ml), electrode holder and mains adapter. Without pH single-rod measuring cell, please order separately.
Technical Information
| Type | pH 50 VioLab Basic |
| Sensor | without |
| Parameters | pH redox temperature |
| pH measuring range | 0 to 14 |
| pH resolution | 0,01 pH |
| pH accuracy | ±0.01 |
| Voltage measuring range | -1999 to +1999 mV |
| Voltage resolution | 1 mV |
| Voltage accuracy | ±1 mV |
| Temperature measuring range | 0 to +100 °C |
| Temperature resolution | 0.1 °C |
| Temperature accuracy | ±0.5 °C (+5 to +60 °C) ±1 °C (outside) |
| Temperature sensor | NTC 30 kΩ |
| Calibration points | 1/2/3 (pH) |
| Calibration memory | current calibration |
| Data memory | 25 measurements |
| Port | without |
| Connection | BNC (pH), Cinch (°C) |
| L x W x H | 160 x 190 x 70 mm |
| Power supply | mains adapter |
| Mains connection | 100-240 V, 50/60 Hz |