Description
DimaFix Spray, Density (D) 0,721 g/cm³, Flash point (flp) -42 °C, Boiling point (bp) -25 °C, UN-Nr. 1950
DimaFix can be used to ensure good adhesion during printing and to fix your object in place during printing, thus preventing any warping. DimaFix is an aerosol spray adhesive for 3D printers that have a heated print bed. The bed should be heated to over 60°C in order for DimaFix to be effective. Below 60ºC DimaFix is inactive. The adhesive aerosol spray then creates a strong bond between the glass of the print bed and the first layer of plastic of your print model. The adhesive spray is completely water-soluble, so cleaning the build plate afterwards is easy.When using materials such as ABS, CPE +, PC or PP that require a higher print bed temperature, Dimafix is a very good solution. The maximum adhesion range is between 90° and 140°C. Different print bed temperatures also result in different degrees of adhesion:
- Below 60ºC: Low adhesion, objects can be detached from the sheet.
- 60 - 75ºC: Medium adhesion, for simple geometries.
- 75 - 95ºC: High adhesion, for complex geometries and long prints.
- Above 95ºC: Very high adhesion, for very complex geometries and very long prints
| Type | DimaFix Spray Adhesive |
| Version | Spray Adhesive |
Compliance & Safety Information
Danger
Hazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)