Description
BOLA bottle multiple distributor with GL 32 connection and three GL 14 necks is a laboratory fitting designed for routing hard-walled tubing from a single bottle thread. The distributor body is manufactured from polytetrafluoroethylene (PTFE), while the black screw cap is made of PPS and matches the GL 32 bottle thread. Each of the three side necks accepts tubing with a maximum outer diameter of 8 mm when used with suitable laboratory screw fittings. This configuration supports simultaneous feed, sampling or venting lines on one vessel without additional adapters. PTFE provides broad chemical resistance for typical laboratory solvents and reagents that contact the distributor body. The compact assembly is supplied as a single piece with a net weight of 0,0406 kg and is intended for standard GL-threaded laboratory bottles. Produced by manufacturer Bohlender, the unit integrates cleanly into existing bottle and tubing setups in synthesis, sample preparation and general wet-chemistry workflows. The three GL 14 outlets allow flexible manifold arrangements while keeping the wetted path limited to PTFE at the distributor body.
This article is part of Laboratory glass bottles, in Bottles & containers.
Key features
- Pack size: 1 pc
- Material: Polytetrafluoroethylene (PTFE)
- Screw cap material: PPS (black)
- Bottle thread: GL 32
- Necks: 3 x GL 14
- Max. hose outer diameter: 8 mm
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Bottle accessories (pouring rings, dispensers, caps)
Catalogue
Brand
Questions about BOLA Multiple Distributors for Bottles, GL 32 3 x GL 14, max. Ø 8 mm PTFE. Screw
What is this article?
BOLA Multiple Distributors for Bottles, GL 32 3 x GL 14, max. Ø 8 mm PTFE. Screw is the article on this page. Luminix Health distributes Bohlender for laboratory use. It sits in Bottle accessories (pouring rings, dispensers, caps), inside Bottles & containers, in Labware.
Bottle accessories are the pieces on the neck: a pouring ring, a dispenser seat, a cap liner, a tamper ring. They decide how the bottle delivers and whether the closure still matches after the original cap is gone.
A laboratory bottle is a closed container with a stated volume and a neck that takes a cap, a stopper or a dispenser. Borosilicate glass is the choice when the liquid is a solvent, or when the bottle will be heated or autoclaved. Polyethylene and polypropylene are the choice when the bottle must not shatter, or when hydrofluoric acid would attack glass. A narrow mouth pours. A wide mouth is for powders and for reaching the bottom. Laboratory ware of this kind is indexed under ISO laboratory glassware. Traceable volume sits with the BIPM and NIST Physical Measurement.
Which category should I open next?
The category is Bottles & containers. The sub-category is Bottle accessories (pouring rings, dispensers, caps). The catalogue is Labware.
Shelves beside this one are Laboratory glass bottles, Plastic bottles (narrow & wide mouth), Sample containers & jars, Canisters & jerrycans and Wash bottles.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.