Description
BOLA swivel screw fittings for GL 32 thread accept sensors, tubes or hoses with an outer diameter of 19,0 mm and allow a maximum deflection angle of 3°. The screw cap is made of PPS, while the inner parts consist of polytetrafluoroethylene (PTFE). In use, the sensor, tube or hose is first passed through the fitting; the fitting is then screwed onto the GL neck and the introduced element is fixed in the desired position. This arrangement holds the guided component at a controlled angle relative to the neck axis within the stated 3° limit. The product is supplied as one piece and has a net weight of 0,015 kg. Laboratory setups that rely on standard GL 32 sockets use these BOLA fittings from manufacturer Bohlender when probes or tubing must pass through a threaded neck and remain adjustable. Material construction follows the stated combination of a PPS screw cap with PTFE inner parts for the GL 32 size. Specified dimensions cover a 19,0 mm outer diameter of the guided element together with the maximum deflection angle of 3°. The fitting is intended for direct installation on matching GL necks in routine laboratory glassware assemblies and is offered here as a single unit.
This article is part of Screw caps & closures, in Stoppers, caps & closures.
Key features
- Pack size: 1 pc
- Thread: GL 32
- Outer diameter: 19,0 mm
- Max. deflection angle: 3°
- Screw cap material: PPS
- Inner parts material: PTFE
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about BOLA Swivelling screw fitting, GL 32, a Ø 19 mm, max. 3° PPS cap, inner parts ma
What is this article?
BOLA Swivelling screw fitting, GL 32, a Ø 19 mm, max. 3° PPS cap, inner parts ma is the article on this page. Luminix Health distributes Bohlender for laboratory use. It sits in Screw caps & closures, inside Stoppers, caps & closures, in Labware.
A screw cap has a thread and a liner. The thread has to match the bottle. The liner has to survive the liquid: a pulp liner fails in a solvent that a PTFE-faced liner ignores. The colour of the cap is not the specification.
A closure is the part that decides whether a bottle stays shut and whether the contents attack the seal. A ground-glass stopper matches a ground neck. A screw cap needs the right thread and a liner that survives the liquid. Rubber and silicone stoppers push into a mouth. The liner, not the colour of the cap, is the chemical choice. The vessels they close are indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stoppers, caps & closures. The sub-category is Screw caps & closures. The catalogue is Labware.
Shelves beside this one are Rubber & silicone stoppers, Ground-joint glass stoppers, Lids & seals and Closures (other).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
