Description
BOLA ground joint swivel screw fittings for NS 29/32 accept sensors, tubes or hoses with an outer diameter of 6 mm and allow a maximum deflection angle of 8°. The ground joint body is made of polytetrafluoroethylene (PTFE) and the screw cap is made of PPS, with a cap thread of GL 25. In operation the sensor, tube or hose is first passed through the fitting; the fitting is then inserted into the ground joint and the introduced element is fixed in the desired position. This arrangement holds the guided component within the stated 8° swivel range on larger NS 29/32 joints. The product is supplied as one piece and has a net weight of 0,0684 kg. Laboratory glassware setups use these BOLA fittings from manufacturer Bohlender when probes or tubing must pass through an NS 29/32 joint and remain adjustable. Construction follows the described PTFE ground joint body with PPS screw cap for this joint size. Specified dimensions cover a 6 mm outer diameter of the guided element, a maximum deflection angle of 8°, and the GL 25 cap thread. The fitting is intended for insertion into matching NS 29/32 joints in routine laboratory apparatus and is offered here as a single unit for direct installation.
This article is part of Screw caps & closures, in Stoppers, caps & closures.
Key features
- Pack size: 1 pc
- Ground joint size: NS 29/32
- Outer diameter: 6 mm
- Max. deflection angle: 8°
- Cap thread: GL 25
- Ground joint body: PTFE
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about BOLA Swivelling Screw Fittings with Ground Joint, NS 29/32, a Ø 6 mm, max. 8° PP
What is this article?
BOLA Swivelling Screw Fittings with Ground Joint, NS 29/32, a Ø 6 mm, max. 8° PP is the article on this page. Luminix Health distributes Bohlender for laboratory use. It sits in Screw caps & closures, inside Stoppers, caps & closures, in Labware.
A screw cap has a thread and a liner. The thread has to match the bottle. The liner has to survive the liquid: a pulp liner fails in a solvent that a PTFE-faced liner ignores. The colour of the cap is not the specification.
A closure is the part that decides whether a bottle stays shut and whether the contents attack the seal. A ground-glass stopper matches a ground neck. A screw cap needs the right thread and a liner that survives the liquid. Rubber and silicone stoppers push into a mouth. The liner, not the colour of the cap, is the chemical choice. The vessels they close are indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stoppers, caps & closures. The sub-category is Screw caps & closures. The catalogue is Labware.
Shelves beside this one are Rubber & silicone stoppers, Ground-joint glass stoppers, Lids & seals and Closures (other).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
