Description
E2 calibration weight is a precision single weight intended for the verification and adjustment of balances and scales in laboratory and industrial settings. It belongs to the E2 accuracy class of individual weights spanning 1 g to 50 kg and is produced from special steel that is high-gloss polished, non-magnetizable and highly corrosion-resistant, with a density of 8,0 g/cm³. These material properties support stable mass values and low magnetic interaction during weighing operations. Pieces up to 20 g are supplied in a plastic box, whereas weights from 50 g are delivered in a wooden case that protects the polished surface during handling and transport. This 0,050 kg unit is offered as a single piece and suits routine calibration tasks, quality assurance checks and metrological control work. The special-steel construction from manufacturer Sartorius combines high-gloss polish with corrosion resistance for reliable use under typical laboratory conditions. Facilities that maintain calibrated weighing equipment can integrate the weight into existing test-weight sets for periodic performance verification.
This article is part of Calibration & test weights, in Balances & scales.
Key features
- Pack size: 1 pc
- Density: 8,0 g/cm³
- Storage temperature: Room Temperature
- Accuracy class: E2
- Material: Special steel, high-gloss polished
- Properties: Non-magnetizable, highly corrosion-resistant
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Cylindrical Weight 20 g, OIML E2, DAkkS
What is this article?
Cylindrical Weight 20 g, OIML E2, DAkkS is the article on this page. Luminix Health distributes Sartorius for laboratory use. It sits in Calibration & test weights, inside Balances & scales, in Lab instruments.
A test weight is a mass of a stated class, used to check a balance. The class sets the tolerance. A weight that is dirty, or that has been handled with bare fingers, is no longer that class. The certificate ties the weight to a standard.
A balance compares a mass with a standard. An analytical balance reads to 0.1 mg or finer and needs a draft shield and a stable bench. A precision balance is coarser and faster. A platform scale takes a heavier load. The reading is only as good as the calibration chain back to the kilogram, which is why test weights and a certificate exist. A moisture analyser is a balance with a heater: it records the loss of mass as water leaves. The unit of mass is kept by the BIPM, compared across Europe by EURAMET, and accredited by BELAC. NIST publishes the same measurement foundations.
Which category should I open next?
The category is Balances & scales. The sub-category is Calibration & test weights. The catalogue is Lab instruments.
Shelves beside this one are Precision balances, Balance accessories, calibration & certificates, Bench, platform & industrial scales, Analytical balances and Moisture analysers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.