Description
Density hydrometer type 6 is intended for liquids with densities from 1,000 to 1,060 g/cm³, graduated in steps of 0,001 g/cm³. Measuring 160 mm in length and calibrated at a reference temperature of 20 °C, the instrument is supplied without a thermometer and uses bottom scale reading. This density interval is typical for many aqueous solutions, process media, and laboratory preparations slightly denser than water, where a compact hydrometer with fine resolution is preferred. Operators can immerse the hydrometer in a suitable cylinder after bringing the sample to 20 °C, then read the scale at the bottom for consistent comparative results. From manufacturer Amarell, the type 6 unit is offered as a single piece and pairs naturally with neighbouring type hydrometers when a stepped density programme is required. The defined measuring range, short overall length, and simple design without an on-board thermometer support everyday density determination in quality control, formulation, and general laboratory use. Clear start and end scale values help match the instrument quickly to the expected sample density before measurement.
This article is part of Hydrometers, in Density & viscosity measurement.
Key features
- Pack size: 1 pc
- Type: 6
- Measuring range: 1,000–1,060 g/cm³
- Scale division: 0,001 g/cm³
- Length: 160 mm
- Reference temperature: 20 °C
Recently viewed
You may also like
Questions about Density hydrometer, type 6, 1,000-1,060:0,001g/cm³, 160mm long, reference
What is this article?
Density hydrometer, type 6, 1,000-1,060:0,001g/cm³, 160mm long, reference is the article on this page. Luminix Health distributes Amarell for laboratory use. It sits in Hydrometers, inside Density & viscosity measurement, in Lab instruments.
A hydrometer floats in a liquid and the stem reading is the density or a related scale such as Brix. The liquid has to be at the temperature printed on the stem, or a correction is required. A chip on the stem changes the reading. One hydrometer does not cover every density.
Density is mass divided by volume. A hydrometer floats at a depth that depends on the density of the liquid. A pycnometer is a vessel of known volume that is weighed full. Viscosity is the resistance to flow. A capillary viscometer times how long a volume takes to fall through a tube. Both measurements need a stated temperature, because liquids change density and viscosity as they warm. The units trace to the BIPM and to NIST.
Which category should I open next?
The category is Density & viscosity measurement. The sub-category is Hydrometers. The catalogue is Lab instruments.
Shelves beside this one are Viscometers and Density meters & pycnometers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.