Description
Stainless steel test sieve Ø 100 x 45 mm with stainless steel analytical sieve mesh conforming to ISO 3310-1 is built for fine particle-size determination in laboratory environments. The mesh aperture of 25 µm (0,025 mm) supports precise separation of fine powders and micro-scale fractions according to standardised sieving methods. The frame provides a working diameter of 100 mm and a height of 45 mm, offering practical sample capacity for routine analytical and quality-control tasks. Robust stainless steel construction withstands mechanical stress and repeated cleaning in demanding laboratory use. Each sieve includes a factory certificate 2.1 in line with EN 10 204, assisting documentation needs in controlled workflows. This unit from manufacturer Linker is appropriate for pharmaceutical, chemical, food-technology and materials laboratories that specify ISO 3310-1 stainless steel mesh for fine fractionation. Consistent mesh geometry promotes reproducible cut points across successive runs. Supplied as a single piece, it integrates into Ø 100 mm sieve stacks where fine 25 µm aperture performance is required for particle classification of solid samples.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 100 mm
- Height: 45 mm
- Mesh size: 0,025 mm (25 µm)
- Standard: ISO 3310-1
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 100 x 45 mm, stainless steel test sieve cloth ISO 3310-1
What is this article?
Stainless steel test sieve Ø 100 x 45 mm, stainless steel test sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
