Description
Stainless steel test sieve Ø 200 x 25 mm with stainless steel test sieve mesh to ISO 3310-1 is intended for laboratory particle-size analysis and material classification. The woven stainless steel mesh provides a defined aperture of 900 µm (0,9 mm), supporting reproducible separation of powders, granules and other particulate solids by size. Frame diameter is 200 mm and height is 25 mm, so the sieve fits common 200 mm analytical sieve stacks used in quality control and research. Frame and mesh are stainless steel; the mesh is secured by soft-PVC welding and the unit is accompanied by a works certificate 2.1 EN 10 245. This configuration from manufacturer Linker is suited to routine dry-sieving workflows where durable metallic construction and ISO 3310-1 mesh geometry are required. Consistent aperture dimensions across the screening surface help maintain comparable fractionation results between batches and instruments. Supplied as one piece, the sieve can be combined with matching lids, receivers and further mesh sizes in the same diameter series to assemble complete analytical sieve sets for laboratory screening applications.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 200 mm
- Height: 25 mm
- Mesh size: 0,9 mm (900 µm)
- Material: Stainless steel
- Mesh standard: ISO 3310-1
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 200 x 25 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 200 x 25 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
