Description
Stainless steel test sieve Ø 400 × 60 mm with stainless steel test sieve mesh conforming to ISO 3310-1 is a precision tool for particle size analysis and material classification. Featuring a mesh aperture of 106 µm (0,106 mm), it enables accurate separation of powders, granules and bulk solids into defined size fractions. The frame diameter of 400 mm and height of 60 mm provide a generous working area while remaining compatible with standard sieve stacks. Manufactured from stainless steel, the unit offers mechanical strength and corrosion resistance during routine laboratory use. Each sieve is accompanied by a factory certificate 2.1 EN 10 220, supporting documentation needs in controlled analytical environments. Available from manufacturer Linker, the sieve cloth follows ISO 3310-1 aperture tolerances for reproducible results. Typical applications include quality control in pharmaceuticals, food technology, construction materials, chemicals and academic research. The single-piece pack is ready for dry or wet sieving workflows where consistent mesh geometry is critical to data integrity.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 400 mm
- Height: 60 mm
- Mesh size: 106 µm
- Material: Stainless steel
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 400 x 60 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 400 x 60 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
