Description
Stainless steel test sieve Ø 400 x 60 mm with stainless steel test sieve mesh to ISO 3310-1 is a laboratory sieving tool for controlled particle-size separation. The woven stainless steel mesh has a defined aperture of 1,6 mm, supporting reproducible fractionation of dry bulk solids in analytical and quality-control work. The frame diameter is 400 mm and the height is 60 mm, giving a practical screening surface that stacks readily with matching sieve frames. Fabricated entirely from stainless steel, the sieve offers mechanical strength and corrosion resistance for routine laboratory handling and cleaning. Each unit is accompanied by a works certificate 2.1 EN 10 209, providing documented traceability for regulated or audited environments. Supplied as a single piece from manufacturer Linker, this ISO 3310-1 mesh sieve suits particle characterisation, incoming-goods inspection, and process monitoring where a 1,6 mm cut point is required. The combination of stainless steel construction, standardised mesh geometry, and factory certification supports consistent sieving results across successive test series without additional accessories.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc(s)
- Diameter: 400 mm
- Height: 60 mm
- Mesh size: 1,6 mm
- Material: Stainless steel
- Mesh standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 400 x 60 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 400 x 60 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
