Description
Feed-through with inner diameter 23 mm, sealable, is a laboratory chamber accessory for routing connections through the enclosure wall while remaining closable when not required. It is supplied in a standard placement configuration and is located on the right side at centre/centre. The inner diameter of 23 mm defines the free passage available for suitable probes, cables or tubing in controlled laboratory setups. Compatibility guidance states that F0 and F2 placements are not intended for model size 260 with light module, and that F0–F3 placements are not intended for model size 110 with light module. Offered as a single piece from manufacturer Memmert, this sealable feed-through supports installations that need a fixed, predefined right-side centre/centre position rather than a freely chosen location. The closable design helps preserve chamber integrity during routine use. Originating from Germany, the unit belongs to laboratory materials used with compatible climate and incubation equipment where a standard feed-through position matches the required layout and the stated model-size limitations are observed.
This article is part of Hose connectors, adapters & fittings, in Tubing, hoses & fittings.
Key features
- Pack size: 1 pc
- Product type: Sealable feed-through
- Inner diameter: 23 mm
- Placement: Standard, right centre/centre
- Restriction: F0 and F2 not for model size 260 with light module
- Country of origin: Germany
Recently viewed
You may also like
Questions about Entry port with 23 mm clear diameter, can be closed, standard position (F0 and F
What is this article?
Entry port with 23 mm clear diameter, can be closed, standard position (F0 and F is the article on this page. Luminix Health distributes Memmert for laboratory use. It sits in Hose connectors, adapters & fittings, inside Tubing, hoses & fittings, in Labware.
A hose connector or adapter joins two lines, or steps one bore down to another. The barb diameter has to match the tube, and the thread has to match the stopcock or the bottle. Most leaks are a mismatch here, not a hole in the tube.
Tubing is how a liquid or a gas moves between two vessels without being poured. Silicone stays flexible and survives repeated autoclaving. PTFE resists almost every solvent and is stiff. PVC is the ordinary flexible line for water and for mild aqueous work. The fitting, not the tube, is what usually leaks: the barb, the thread and the stopcock have to match the tube bore. Glass and plastic apparatus around these lines is indexed under ISO laboratory ware.
Which category should I open next?
The category is Tubing, hoses & fittings. The sub-category is Hose connectors, adapters & fittings. The catalogue is Labware.
Shelves beside this one are PVC, PTFE & other tubing, Stopcocks & valves, Silicone tubing and Tubing accessories.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.