Description
Hydrometer 1,100 - 1,200 without thermometer is a density measuring instrument for determining the relative density of liquids within the range 1,100 to 1,200 g/ml. Its scale is graduated in steps of 0,001 g/ml, enabling precise reading of density values for laboratory and process samples. Approximately 300 mm long, the hydrometer is calibrated at a reference temperature of 20 °C. It is delivered without an integrated thermometer, allowing temperature control or correction to be handled externally according to the analytical procedure in use. This Geco-Gering instrument addresses denser liquids above 1,100 g/ml and is therefore suitable for solutions and formulations that fall in that higher density band. In practice the hydrometer is placed in the sample liquid until it reaches equilibrium flotation; the density is then taken from the stem scale at the meniscus. Clear range limits, fine scale division and a defined 20 °C reference temperature support consistent density determination in quality-control, production-support and teaching laboratories. Supplied as a single piece, it provides a dedicated measuring tool for the 1,100–1,200 g/ml interval without built-in temperature measurement.
This article is part of Hydrometers, in Density & viscosity measurement.
Key features
- Pack size: 1 pc
- Density: range: 1,100 - 1,200 g/ml
- Storage temperature: 10-50 °C
- Scale division: 0,001 g/ml
- Length: approx. 300 mm
- Calibration temperature: 20 °C
Recently viewed
You may also like
Questions about Hydrometer 1,100 - 1,200 without thermometer
What is this article?
Hydrometer 1,100 - 1,200 without thermometer is the article on this page. Luminix Health distributes Geco-Gering for laboratory use. It sits in Hydrometers, inside Density & viscosity measurement, in Lab instruments.
A hydrometer floats in a liquid and the stem reading is the density or a related scale such as Brix. The liquid has to be at the temperature printed on the stem, or a correction is required. A chip on the stem changes the reading. One hydrometer does not cover every density.
Density is mass divided by volume. A hydrometer floats at a depth that depends on the density of the liquid. A pycnometer is a vessel of known volume that is weighed full. Viscosity is the resistance to flow. A capillary viscometer times how long a volume takes to fall through a tube. Both measurements need a stated temperature, because liquids change density and viscosity as they warm. The units trace to the BIPM and to NIST.
Which category should I open next?
The category is Density & viscosity measurement. The sub-category is Hydrometers. The catalogue is Lab instruments.
Shelves beside this one are Viscometers and Density meters & pycnometers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
