Description
M2 knob weight is an individual test weight with a nominal mass of 10 g for calibration and verification tasks in weighing laboratories. It forms part of the M2 single-weight range from 1 g to 10 kg and is made from finely turned brass, providing a precisely machined surface appropriate for M2 class work. The knob design allows stable handling when the mass is placed on or removed from a balance pan. According to the manufacturer description, pieces up to 20 g are delivered in a plastic box, while masses from 50 g upward use a wooden case; this 10 g unit therefore comes in a plastic box that shields the weight during storage and transport. Net weight is 0,010 kg and gross weight is 0,103 kg. Supplied as 1 pc, it supports quality systems that specify M2 individual weights rather than complete sets. This test weight from manufacturer Sartorius is suited to routine checks of scales and balances, internal metrology programmes, and comparative measurements where finely turned brass M2 knob weights are required. Origin is Germany (Lower Saxony), aligning with professional laboratory test-weight supply for industrial and research environments.
This article is part of Calibration & test weights, in Balances & scales.
Key features
- Pack size: 1 pc
- Storage temperature: Room Temperature
- Product type: Knob weight
- Accuracy class: M2
- Nominal mass: 10 g
- Material: Finely turned brass
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Knob Weight 1 g, OIML M2, DAkkS
What is this article?
Knob Weight 1 g, OIML M2, DAkkS is the article on this page. Luminix Health distributes Sartorius for laboratory use. It sits in Calibration & test weights, inside Balances & scales, in Lab instruments.
A test weight is a mass of a stated class, used to check a balance. The class sets the tolerance. A weight that is dirty, or that has been handled with bare fingers, is no longer that class. The certificate ties the weight to a standard.
A balance compares a mass with a standard. An analytical balance reads to 0.1 mg or finer and needs a draft shield and a stable bench. A precision balance is coarser and faster. A platform scale takes a heavier load. The reading is only as good as the calibration chain back to the kilogram, which is why test weights and a certificate exist. A moisture analyser is a balance with a heater: it records the loss of mass as water leaves. The unit of mass is kept by the BIPM, compared across Europe by EURAMET, and accredited by BELAC. NIST publishes the same measurement foundations.
Which category should I open next?
The category is Balances & scales. The sub-category is Calibration & test weights. The catalogue is Lab instruments.
Shelves beside this one are Precision balances, Balance accessories, calibration & certificates, Bench, platform & industrial scales, Analytical balances and Moisture analysers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
