Description
Muffle furnace L9/13/C550 is a laboratory muffle furnace rated for a maximum working temperature of 1300 °C. Freely radiating heating elements on support tubes deliver short heat-up times and durable performance in the chamber. Robust multi-layer insulation based on lightweight refractory bricks supports the elevated temperature range, offering a practical alternative to standard L(T)./12 muffle furnaces when higher process temperatures are needed.
This article is part of Muffle & tube furnaces, in Heating, drying & cooling.
The chamber is heated from two sides. A dual-shell ventilated housing of textured stainless steel keeps external surfaces cooler and adds mechanical stability. The flap door doubles as a work platform, with an adjustable air inlet in the door and an exhaust air outlet in the rear wall. This configuration includes a protective gas connection and a thermocouple. Touch-operated control, solid-state relays for low-noise operation, and NTLog Basic for USB process-data recording complete the standard equipment. Supplied as 1 pc from manufacturer Nabertherm, the unit is intended for defined applications within the operating instructions.
Key features
- Pack size: 1 pc
- Maximum temperature: 1300 °C
- Model: L9/13/C550
- Door type: Flap door
- Protective gas connection: Included
- Thermocouple: Included
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Muffle Furnace L9/13/C550 Tmax1300 with flap door protective gas connection and
What is this article?
Muffle Furnace L9/13/C550 Tmax1300 with flap door protective gas connection and is the article on this page. Luminix Health distributes Nabertherm for laboratory use. It sits in Muffle & tube furnaces, inside Heating, drying & cooling, in Lab instruments.
A muffle furnace surrounds a sample with heat for ashing or ignition, often to 1100 °C. A tube furnace heats a sample in a controlled atmosphere inside a tube. The maximum temperature and the chamber size are the specification. A drying oven is not a furnace.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Muffle & tube furnaces. The catalogue is Lab instruments.
Shelves beside this one are Heating mantles, Circulators, chillers & thermostats, Drying ovens & climate chambers, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
