Description
NEXOPART test sieve with stainless steel frame 450×70 mm and square-hole perforated plate is a large-format analysis sieve for coarse particle size classification. The perforated plate provides a nominal aperture width of 13,2 mm and is manufactured in accordance with DIN ISO 3310-2. The stainless steel frame measures 450 mm in diameter and 70 mm in height, offering a generous screening area suited to bulk samples and coarser fractions. Square-hole perforated plate construction delivers defined, uniform openings for reproducible sieving of granular solids, aggregates and similar materials. This sieve is supplied as one piece and fits workflows that require DIN ISO 3310-2 compliance for perforated-plate sieves. From manufacturer NEXOPART, the unit is intended for laboratory and industrial particle-size analysis where robust stainless steel frames and precise square apertures are required. The combination of 450 mm diameter, 70 mm height and 13,2 mm square holes supports efficient separation steps ahead of finer mesh sieves. Frame material, aperture geometry and the referenced DIN ISO standard fully characterise the product for catalogue and method documentation.
This article is part of Test sieves (perforated plate), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Frame material: Stainless steel
- Diameter: 450 mm
- Height: 70 mm
- Aperture size: 13,2 mm
- Sieving medium: Square-hole perforated plate
Recently viewed
You may also like
Questions about NEXOPART Test Sieve with stainless steel frame 450X70 mm - with perforated steel
What is this article?
NEXOPART Test Sieve with stainless steel frame 450X70 mm - with perforated steel is the article on this page. Luminix Health distributes NEXOPART for laboratory use. It sits in Test sieves (perforated plate), inside Test sieves & mills, in Lab instruments.
A perforated-plate sieve sorts particles through punched holes rather than a woven mesh. It is used for coarser cuts, where a wire would be too fragile. The hole size and the frame still have to be the stated ones.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (perforated plate). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
