Description
Stainless steel frame with identification number and factory certificate 2.1 EN 10204 is a laboratory component for analytical sieving. It has a diameter of 200 mm and an inner height of 50 mm. The covering consists of perforated plates made from Fe with square perforation according to ISO 565 and ISO 3310-2, giving a mesh size of 112 mm. Built from stainless steel, the frame is intended for analysis sieve assemblies where defined aperture geometry and mechanical stability matter. Traceability is supported by an individual identification number together with a factory certificate type 2.1 in accordance with EN 10204. This configuration from manufacturer Linker suits particle-size determination workflows that use standardised perforated-plate media. The square perforation pattern follows the cited ISO norms for test sieves with perforated metal plate. The 200 mm diameter and 50 mm inner height match common laboratory sieve formats, easing integration into existing stacks and holders. Supplied as one piece, the frame provides a durable stainless-steel structure for routine sieving of bulk solids and granular materials under controlled analytical conditions in quality-oriented laboratories.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 200 mm
- Inner height: 50 mm
- Mesh size: 112 mm
- Covering: Perforated Fe plates, square perforation ISO 565/ISO 3310-2
Récemment consulté
Vous aimerez peut-être aussi
Questions about Cadre en acier inoxydable, avec numéro d'identification et certificat de fabrication 2.1 EN 10 204
What is this article?
Cadre en acier inoxydable, avec numéro d'identification et certificat de fabrication 2.1 EN 10 204 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Tamis d'essai (toile métallique), inside Tamis d'essai & broyeurs, in Instruments de laboratoire.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Tamis d'essai & broyeurs. The sub-category is Tamis d'essai (toile métallique). The catalogue is Instruments de laboratoire.
Shelves beside this one are Tamis d'essai (tôle perforée), Broyeurs, moulins & homogénéisateurs, Tamiseurs vibrants and Accessoires de tamis (couvercles, fonds, anneaux).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.