Description
Cooling heating circulator 230 V; 50 Hz
Features:
Thermostatic circulator with latest microprocessor technology. Integrated cooling system
Bright and high-contrast graphic OLED display
Integrated programmer, 1 programme with max. 20 segments
Operation with Cursor- and Softkeys
EasyUse system for simple operation of the whole unit
SelfCheck Assistant for system diagnosis
Command console can be detached and used as remote control
Tower design with small footprint
Low filling volume enables rapid changes in temperature
Bath vessel made of stainless steel (insulated, with overflow and drain tap)
LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
Fully electronic continuous controller with PID action for internal & external control
PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system
Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
SmartCool system for energy-saving digital cooling management including compressor on-off control
Hybrid cooling system: (heat removal complementary with cooling water)
Utilizes natural refrigerants
Technical Features (according to DIN 12876):
Working temperature range: -40 ... 200 °C
Operating temperature range: -40 ... 200 °C
Ambient temperature range: 5 ... 40 °C
Temperature stability: 0.05 ± K
Heater power max.: 2.5 kW
Power consumption max.: 3.7 kW
Current max.: 16 A
Pump Pressure max.: 0,7 bar
Pump suction max.: 0,4 bar
Pump flow rate max. (pressure): 22 L/min
Pump Flow rate max. (suction): 20 L/min
In / Outlet connection thread (outside): M16 x 1
In / Outlet Ø olives: 13 mm
Filling volume min.: 2.4 L
Filling volume max.: 4.4 L
Overall dimensions (WxDxH): 300 x 430 x 675 mm
Weight: 42 kg
Refrigerant stage 1: R-290 (GWP 3); 0.120 kg; 0.0 t CO2-eq
Power supply: 230 V; 50 Hz
Power plug: Power cord with angled plug (CEE7/7)
Cooling Capacity (Pumpenstufe):
20 °C (8); Ethanol; 0,6 kW
10 °C (8); Ethanol; 0,6 kW
0 °C (8); Ethanol; 0,6 kW
-10 °C (8); Ethanol; 0,41 kW
-20 °C (4); Ethanol; 0,24 kW
-30 °C (4); Ethanol; 0,12 kW
-35 °C (4); Ethanol; 0,07 kW
-40 °C (2); Ethanol; 0,02 kW
Standard Accessory:
2 screw caps, 2 closing plugs
2 nipples 13 mm for pump connectors
2 nipples 10 mm with screw cap G3/8 for cooling water
Key features
- Technical Information Sheet:
Récemment consulté
Vous aimerez peut-être aussi
Questions about LAUDA PRO RP 240 E Cooling heating circulator 230 V; 50 Hz
What is this article?
LAUDA PRO RP 240 E Cooling heating circulator 230 V; 50 Hz is the article on this page. Luminix Health distributes Lauda for laboratory use. It sits in Circulators, chillers & thermostats, inside Heating, drying & cooling, in Instruments de précision.
A circulator or thermostat holds a bath liquid at a set temperature and pumps it through a jacket. A chiller is the same idea aimed below ambient. The temperature range, the cooling power and the pump flow are the three numbers. The fluid has to match the range.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Circulators, chillers & thermostats. The catalogue is Instruments de précision.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Drying ovens & climate chambers, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.