Iodure de 1-méthyl-3-propyl-imidazolium, min. 98 %, 25 g, verre

Catalog nr. 2091.1
Carl Roth

Volume: 25 g
Value Packs: 1 piece
Prix:
Prix réduit€224,70
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

L'iodure de 1-méthyl-3-propylimidazolium est un sel d'imidazolium de type liquide ionique fourni avec une pureté minimale de 98 % pour la synthèse en laboratoire et la recherche sur les matériaux. Identifié par le numéro CAS 119171-18-5 et la formule brute C₇H₁₃N₂I, il possède une masse molaire de 252,10 g/mol et une densité de 1,55 g/cm³. Les données du fabricant indiquent un point d'éclair de 220 °C et une plage d'ébullition de 301 à 304 °C, facilitant une planification éclairée des processus dans des conditions contrôlées. Ce produit du fabricant Carl ROTH convient aux flux de travail nécessitant un sel à contre-ion iodure clairement documenté plutôt que des mélanges techniques indéfinis. Les analystes et les chimistes préparateurs peuvent se fier à la composition indiquée lors de la préparation de solutions mères, de milieux réactionnels ou de séries comparatives de liquides ioniques. À manipuler conformément à la fiche de données de sécurité et aux règles locales de laboratoire relatives aux sels d'iodure organiques. La teneur définie, la masse moléculaire et les constantes physiques le rendent adapté à une expérimentation reproductible à l'échelle du banc d'essai dans les environnements de R&D universitaires et industriels.

Cet article appartient à la catégorie Solvants techniques et de synthèse, dans Solvants.

Caractéristiques principales

  • Aspect : liquide jaune à orange
  • Teneur : ≥98 %
  • Numéro CAS : 119171-18-5
  • Conditionnements : 25 g, 100 g
  • Pureté : min. 98 %
  • Formule brute : C₇H₁₃N₂I
  • Masse molaire : 252,10 g/mol
  • Densité : 1,55 g/cm³
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS07 Avertissement

Hazard Statements (H-Phrases)

H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation

Precautionary Statements (P-Phrases)

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313 P332+P313 – No description available
P337+P313 P337+P313 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Iodure de 1-méthyl-3-propyl-imidazolium, min. 98 %, 25 g, verre

What is this article?

Iodure de 1-méthyl-3-propyl-imidazolium, min. 98 %, 25 g, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Technical & synthesis grade solvents, inside Solvents, in Produits chimiques de laboratoire et industriels.

Technical and synthesis grades are for cleaning, for a coarse extraction and for chemistry that does not end in a chromatogram. They cost less because more impurity is allowed. They are the wrong bottle to make a mobile phase or a volumetric standard.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?