Description
Buffer solution DuraCal pH 8.00 (25 °C) is an orange-tinted alkaline calibration buffer for accurate pH electrode calibration and pH-value determination. Defined at the reference temperature of 25 °C, it supplies a clear pH 8.00 setpoint for routine and multi-point calibration work. The ready-to-use solution is delivered in a 500 ml dosage bottle and shows a density of approximately 1 g/cm³ with a boiling point of 100 °C, consistent with aqueous laboratory buffers. A Hamilton certificate accompanies each unit, providing documented value traceability for quality-controlled environments. This orange-tinted DuraCal preparation from manufacturer HAMILTON is suited to analytical, QC, research and teaching laboratories performing determination of physical properties. The distinctive orange colour aids quick visual identification among other buffers, while the dosage-bottle format and 500 ml volume support convenient, repeated dispensing during calibration sequences. Use this pH 8.00 standard whenever a certified mildly alkaline reference point is required alongside further DuraCal buffers.
This article is part of pH buffers & conductivity standards, in Buffers & pH solutions.
Key features
- pH value (25 °C): 8.00 ±0.02
- Pack size: 500 ml dosage bottle
- Density: ~1 g/cm³
- Boiling point: 100 °C
- Product type: pH buffer solution
- pH value: 8,00 (25 °C)
- Appearance: tinted orange
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
Danger
Hazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Récemment consulté
Vous aimerez peut-être aussi
Questions about Buffer solution DuraCal pH 8.00 (25 °C), tinted ORANGE,, 500 ml, dosage bottle
What is this article?
Buffer solution DuraCal pH 8.00 (25 °C), tinted ORANGE,, 500 ml, dosage bottle is the article on this page. Luminix Health distributes HAMILTON for laboratory use. It sits in pH buffers & conductivity standards, inside Buffers & pH solutions, in Produits chimiques.
A pH buffer for calibration has a stated pH at a stated temperature, often traceable. A conductivity standard has a stated conductivity. They are not general reagents and they should not be poured back into the bottle. The temperature of the measurement has to be the temperature on the label, or the meter has to compensate.
A buffer resists a change in pH when a little acid or base is added. It does that because a weak acid and its conjugate base are both present. A pH buffer used to calibrate a meter has a stated value at a stated temperature. A biological buffer such as Tris or HEPES is chosen because it holds the pH of a living system and does not poison it. Conductivity standards are the sister articles for a conductivity meter. The ions are on PubChem. Electrode calibration practice sits with EURAMET and BELAC.
Which category should I open next?
The category is Buffers & pH solutions. The sub-category is pH buffers & conductivity standards. The catalogue is Produits chimiques.
Shelves beside this one are Biological buffers (Tris, HEPES, MOPS) and Buffers (other).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.