CO2-Incubator ICO105med, 107l, 18-50°C, CO2 control 0-20%

Catalog nr. ICO105med
Memmert

Prix:
Prix réduit€7.017,00
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

CO2 Incubator ICO105med is a medical-device CO2 incubator with TwinDISPLAY and a nominal chamber volume of 107 l for controlled cell and tissue culture work. The adjustable temperature range is 18 °C to 50 °C, with a working range from 5 °C above ambient up to 50 °C. CO2 is regulated from 0 % to 20 % via dual-beam NDIR measurement. Humidity is limited by a Peltier element; with a filled and inserted water dish the relative humidity is held at 93 % rh ± 2,5 %. An electronic microprocessor temperature controller with Pt100 sensor and self-diagnostics provides precise regulation. The unit features a fully insulated stainless-steel outer door, a heated inner glass door, six-sided all-round heating, and stainless-steel housing and interior. It is supplied with one water dish and two stainless-steel perforated shelves, multiple over- and under-temperature protection with alarm, and a stored sterilisation programme. A factory calibration certificate for +37 °C and 5 % CO2 is included. Exterior dimensions are 719 × 850 × 591 mm; interior 560 × 480 × 400 mm. Electrical supply is 230 V, 50/60 Hz with a maximum power consumption of approximately 1300 W. This model is from manufacturer Memmert.

This article is part of Incubators, in Heating, drying & cooling.

Key features

  • Pack size: 1 pc
  • Chamber volume: 107 l
  • Temperature setting range: 18 °C to 50 °C
  • CO2 control: 0–20 % (dual-beam NDIR)
  • Humidity limitation: 93 % rh ± 2,5 %
  • Interior dimensions: 560 × 480 × 400 mm
  • Technical Information Sheet: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Récemment consulté

Vous aimerez peut-être aussi

Questions about CO2-Incubator ICO105med, 107l, 18-50°C, CO2 control 0-20%

What is this article?

CO2-Incubator ICO105med, 107l, 18-50°C, CO2 control 0-20% is the article on this page. Luminix Health distributes Memmert for laboratory use. It sits in Incubators, inside Heating, drying & cooling, in Instruments de laboratoire.

An incubator holds the mild, even temperature a culture needs, often 25 °C or 37 °C, sometimes with carbon dioxide. It is not a drying oven. Uniformity and, for cells, the gas control are the specification. A flask of cells in a drying oven is a dead flask.

Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?