Karl Fischer ROTI®Hydroquant S Oil, pour titrage KF, 1 l, verre

Catalog nr. 20TK.1
Carl Roth

Volume: 1 liter
Value Packs: 1 piece
Prix:
Prix réduit€103,75
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Le Karl Fischer ROTI®Hydroquant S Oil est un réactif spécialisé pour le titrage Karl Fischer, destiné à la détermination de l'humidité dans les matrices d'échantillons à base d'huile et autres matrices hydrophobes apparentées. Il est fourni dans un flacon en verre de 1 l pour une utilisation directe dans les flux de travail analytiques KF. Les données physiques comprennent une densité de 0,83 g/cm³, un point d'éclair de 11 °C et un point d'ébullition de 63 °C, avec le numéro ONU 3286. Le milieu favorise la dissolution et le titrage des matériaux huileux pour lesquels les solvants Karl Fischer classiques peuvent être moins adaptés, aidant à maintenir des conditions de titrage stables et un comportement clair du point final. Disponible auprès du fabricant Carl ROTH au sein de la gamme ROTI®Hydroquant, ce produit convient aux procédures de KF volumétriques et coulométriques utilisées dans les laboratoires de contrôle qualité et de recherche. Les applications typiques incluent l'analyse de l'eau résiduelle dans les huiles, les lubrifiants et les échantillons industriels ou de laboratoire similaires. Le conditionnement en verre facilite la manipulation et le stockage selon les pratiques de laboratoire standard. Le réactif est positionné pour les environnements de chimie analytique de routine qui exigent des performances KF constantes sur des matrices hydrophobes difficiles, sans altérer les méthodes de titrage établies.

Cet article appartient à Titrateurs & systèmes électrochimiques, dans pH & électrochimie.

Caractéristiques principales

  • Essai d'application : conforme
  • Conditionnement : 1 l verre
  • Densité : 0,83 g/cm³
  • Point d'éclair : 11 °C
  • Point d'ébullition : 63 °C
  • Fiche d'informations techniques : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS05GHS06GHS08 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H301+ H301+ – No description available
H311 Toxic in contact with skin
H314 Causes severe skin burns and eye damage
H332 Harmful if inhaled
H360D H360D – No description available
H370 Causes damage to organs

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 P261 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Karl Fischer ROTI®Hydroquant S Oil, pour titrage KF, 1 l, verre

What is this article?

Karl Fischer ROTI®Hydroquant S Oil, pour titrage KF, 1 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Titrators & electrochemistry systems, inside pH & electrochemistry, in Instruments de précision.

A titrator adds a reagent and watches an electrode until an endpoint, then calculates the amount. It is a burette, a stirrer and a meter in one. The electrode and the reagent concentration still decide the result. A manual titration is the same chemistry without the automation.

A pH meter is a voltmeter on a glass electrode. The voltage tracks hydrogen-ion activity, and the electrode is converted to pH only after it is adjusted with buffers of known value. Conductivity measures how well a solution carries a current, which for dilute salts tracks concentration. Dissolved oxygen and titration are further electrodes on the same idea: a sensor, a standard, and a reading that is only as fresh as the calibration. Buffer values and chemical identity sit on PubChem. Accreditation of the calibration laboratory is the field of BELAC and EURAMET.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?